diff mbox series

[5/8,v2] dma: k3dma: Add support to dma_avail_chan

Message ID 1546635388-13795-6-git-send-email-john.stultz@linaro.org
State Superseded
Headers show
Series k3dma patches to add support for hi3660/HiKey960 | expand

Commit Message

John Stultz Jan. 4, 2019, 8:56 p.m. UTC 
From: Li Yu <liyu65@hisilicon.com>


dma_avail_chan as a property for k3dma, it defines available dma
channels which a non-secure mode driver can use.

One sample usage of this is in Hi3660 SoC. DMA channel 0 is
reserved to lpm3, which is a coprocessor for power management. So
as a result, any request in kernel (which runs on main processor
and in non-secure mode) should start from at least channel 1.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Guodong Xu <guodong.xu@linaro.org>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Li Yu <liyu65@hisilicon.com>

[jstultz: Reworked to use a channel mask]
Signed-off-by: John Stultz <john.stultz@linaro.org>

---
 drivers/dma/k3dma.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/dma/k3dma.c b/drivers/dma/k3dma.c
index b2060bf..431094b 100644
--- a/drivers/dma/k3dma.c
+++ b/drivers/dma/k3dma.c
@@ -111,6 +111,7 @@  struct k3_dma_dev {
 	struct dma_pool		*pool;
 	u32			dma_channels;
 	u32			dma_requests;
+	u32			dma_avail_chan;
 	unsigned int		irq;
 };
 
@@ -318,6 +319,9 @@  static void k3_dma_tasklet(unsigned long arg)
 	/* check new channel request in d->chan_pending */
 	spin_lock_irq(&d->lock);
 	for (pch = 0; pch < d->dma_channels; pch++) {
+		if (!(d->dma_avail_chan & (1<<pch)))
+			continue;
+
 		p = &d->phy[pch];
 
 		if (p->vchan == NULL && !list_empty(&d->chan_pending)) {
@@ -335,6 +339,9 @@  static void k3_dma_tasklet(unsigned long arg)
 	spin_unlock_irq(&d->lock);
 
 	for (pch = 0; pch < d->dma_channels; pch++) {
+		if (!(d->dma_avail_chan & (1<<pch)))
+			continue;
+
 		if (pch_alloc & (1 << pch)) {
 			p = &d->phy[pch];
 			c = p->vchan;
@@ -855,6 +862,13 @@  static int k3_dma_probe(struct platform_device *op)
 				"dma-channels", &d->dma_channels);
 		of_property_read_u32((&op->dev)->of_node,
 				"dma-requests", &d->dma_requests);
+		ret = of_property_read_u32((&op->dev)->of_node,
+				"dma-avail-chan", &d->dma_avail_chan);
+		if (ret) {
+			dev_warn(&op->dev,
+				 "dma-avail-chan doesn't exist, considering all as available.\n");
+			d->dma_avail_chan = (u32)~0UL;
+		}
 	}
 
 	if (!(soc_data->flags & K3_FLAG_NOCLK)) {
@@ -886,8 +900,12 @@  static int k3_dma_probe(struct platform_device *op)
 		return -ENOMEM;
 
 	for (i = 0; i < d->dma_channels; i++) {
-		struct k3_dma_phy *p = &d->phy[i];
+		struct k3_dma_phy *p;
+
+		if (!(d->dma_avail_chan & (1<<i)))
+			continue;
 
+		p = &d->phy[i];
 		p->idx = i;
 		p->base = d->base + i * 0x40;
 	}