@@ -296,6 +296,16 @@ config REGULATOR_HI6421
21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All
of them come with support to either ECO (idle) or sleep mode.
+config REGULATOR_HI6421V530
+ tristate "HiSilicon Hi6421v530 PMIC voltage regulator support"
+ depends on MFD_HI6421_PMIC && OF
+ help
+ This driver provides support for the voltage regulators on
+ HiSilicon Hi6421v530 PMU / Codec IC.
+ Hi6421v530 is a multi-function device which, on regulator part,
+ provides 5 general purpose LDOs, and all of them come with support
+ to either ECO (idle) or sleep mode.
+
config REGULATOR_HI655X
tristate "Hisilicon HI655X PMIC regulators support"
depends on ARCH_HISI || COMPILE_TEST
@@ -38,6 +38,7 @@ obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
obj-$(CONFIG_REGULATOR_GPIO) += gpio-regulator.o
obj-$(CONFIG_REGULATOR_HI6421) += hi6421-regulator.o
+obj-$(CONFIG_REGULATOR_HI6421V530) += hi6421v530-regulator.o
obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
new file mode 100644
@@ -0,0 +1,209 @@
+/*
+ * Device driver for regulators in Hi6421V530 IC
+ *
+ * Copyright (c) <2017> HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ * Copyright (c) <2017> Linaro Ltd.
+ * http://www.linaro.org
+ *
+ * Author: Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>
+ * Guodong Xu <guodong.xu@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/mfd/hi6421-pmic.h>
+
+/*
+ * struct hi6421v530_regulator_info - hi6421v530 regulator information
+ * @desc: regulator description
+ * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
+ * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
+ */
+struct hi6421v530_regulator_info {
+ struct regulator_desc rdesc;
+ u8 mode_mask;
+ u32 eco_microamp;
+};
+
+/* HI6421v530 regulators */
+enum hi6421v530_regulator_id {
+ HI6421V530_LDO3,
+ HI6421V530_LDO9,
+ HI6421V530_LDO11,
+ HI6421V530_LDO15,
+ HI6421V530_LDO16,
+};
+
+static const unsigned int ldo_3_voltages[] = {
+ 1800000, 1825000, 1850000, 1875000,
+ 1900000, 1925000, 1950000, 1975000,
+ 2000000, 2025000, 2050000, 2075000,
+ 2100000, 2125000, 2150000, 2200000,
+};
+
+static const unsigned int ldo_9_11_voltages[] = {
+ 1750000, 1800000, 1825000, 2800000,
+ 2850000, 2950000, 3000000, 3300000,
+};
+
+static const unsigned int ldo_15_16_voltages[] = {
+ 1750000, 1800000, 2400000, 2600000,
+ 2700000, 2850000, 2950000, 3000000,
+};
+
+static const struct regulator_ops hi6421v530_ldo_ops;
+
+#define HI6421V530_LDO_ENABLE_TIME (350)
+
+/*
+ * _id - LDO id name string
+ * v_table - voltage table
+ * vreg - voltage select register
+ * vmask - voltage select mask
+ * ereg - enable register
+ * emask - enable mask
+ * odelay - off/on delay time in uS
+ * ecomask - eco mode mask
+ * ecoamp - eco mode load uppler limit in uA
+ */
+#define HI6421V530_LDO(_ID, v_table, vreg, vmask, ereg, emask, \
+ odelay, ecomask, ecoamp) { \
+ .rdesc = { \
+ .name = #_ID, \
+ .of_match = of_match_ptr(#_ID), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &hi6421v530_ldo_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = HI6421V530_##_ID, \
+ .owner = THIS_MODULE, \
+ .n_voltages = ARRAY_SIZE(v_table), \
+ .volt_table = v_table, \
+ .vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
+ .vsel_mask = vmask, \
+ .enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
+ .enable_mask = emask, \
+ .enable_time = HI6421V530_LDO_ENABLE_TIME, \
+ .off_on_delay = odelay, \
+ }, \
+ .mode_mask = ecomask, \
+ .eco_microamp = ecoamp, \
+}
+
+/* HI6421V530 regulator information */
+
+static struct hi6421v530_regulator_info hi6421v530_regulator_info[] = {
+ HI6421V530_LDO(LDO3, ldo_3_voltages, 0x061, 0xf, 0x060, 0x2,
+ 20000, 0x6, 8000),
+ HI6421V530_LDO(LDO9, ldo_9_11_voltages, 0x06b, 0x7, 0x06a, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO11, ldo_9_11_voltages, 0x06f, 0x7, 0x06e, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO15, ldo_15_16_voltages, 0x077, 0x7, 0x076, 0x2,
+ 40000, 0x6, 8000),
+ HI6421V530_LDO(LDO16, ldo_15_16_voltages, 0x079, 0x7, 0x078, 0x2,
+ 40000, 0x6, 8000),
+};
+
+static unsigned int hi6421v530_regulator_ldo_get_mode(
+ struct regulator_dev *rdev)
+{
+ struct hi6421v530_regulator_info *info;
+ unsigned int reg_val;
+
+ info = rdev_get_drvdata(rdev);
+ regmap_read(rdev->regmap, rdev->desc->enable_reg, ®_val);
+
+ if (reg_val & (info->mode_mask))
+ return REGULATOR_MODE_IDLE;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int hi6421v530_regulator_ldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct hi6421v530_regulator_info *info;
+ unsigned int new_mode;
+
+ info = rdev_get_drvdata(rdev);
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ new_mode = 0;
+ break;
+ case REGULATOR_MODE_IDLE:
+ new_mode = info->mode_mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+ info->mode_mask, new_mode);
+
+ return 0;
+}
+
+
+static const struct regulator_ops hi6421v530_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_table,
+ .map_voltage = regulator_map_voltage_ascend,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_mode = hi6421v530_regulator_ldo_get_mode,
+ .set_mode = hi6421v530_regulator_ldo_set_mode,
+};
+
+static int hi6421v530_regulator_probe(struct platform_device *pdev)
+{
+ struct hi6421_pmic *pmic;
+ struct regulator_dev *rdev;
+ struct regulator_config config = { };
+ unsigned int i;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic) {
+ dev_err(&pdev->dev, "no pmic in the regulator parent node\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(hi6421v530_regulator_info); i++) {
+ config.dev = pdev->dev.parent;
+ config.regmap = pmic->regmap;
+ config.driver_data = &hi6421v530_regulator_info[i];
+
+ rdev = devm_regulator_register(&pdev->dev,
+ &hi6421v530_regulator_info[i].rdesc,
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register regulator %s\n",
+ hi6421v530_regulator_info[i].rdesc.name);
+ return PTR_ERR(rdev);
+ }
+ }
+ return 0;
+}
+
+static struct platform_driver hi6421v530_regulator_driver = {
+ .driver = {
+ .name = "hi6421v530-regulator",
+ },
+ .probe = hi6421v530_regulator_probe,
+};
+module_platform_driver(hi6421v530_regulator_driver);
+
+MODULE_AUTHOR("Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com>");
+MODULE_DESCRIPTION("Hi6421v530 regulator driver");
+MODULE_LICENSE("GPL v2");