@@ -9,8 +9,8 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o
obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
-obj-$(CONFIG_NET_DSA_REALTEK_SMI) += realtek.o
-realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o
+obj-$(CONFIG_NET_DSA_REALTEK_SMI) += dsa-realtek-smi.o
+dsa-realtek-smi-objs := realtek-smi.o rtl8366.o rtl8366rb.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o
When building with CONFIG_NET_DSA_REALTEK_SMI and CONFIG_REALTEK_PHY enabled as loadable modules, we see the following warning: warning: same module names found: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Rework so the names matches the config fragment. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> --- drivers/net/dsa/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) -- 2.20.1