@@ -69,6 +69,12 @@ config GPIO_SYSFS
ioctl() operations instead. The character device is always
available.
+config GPIO_SHARED
+ tristate "Driver for handling shared GPIO lines"
+ depends on OF_GPIO
+ help
+ When a single GPIO line is connected to different peripherals.
+
config GPIO_GENERIC
depends on HAS_IOMEM # Only for IOMEM drivers
tristate
@@ -123,6 +123,7 @@ obj-$(CONFIG_GPIO_SAMA5D2_PIOBU) += gpio-sama5d2-piobu.o
obj-$(CONFIG_GPIO_SCH311X) += gpio-sch311x.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_SIOX) += gpio-siox.o
+obj-$(CONFIG_GPIO_SHARED) += gpio-shared.o
obj-$(CONFIG_GPIO_SODAVILLE) += gpio-sodaville.o
obj-$(CONFIG_GPIO_SPEAR_SPICS) += gpio-spear-spics.o
obj-$(CONFIG_GPIO_SPRD) += gpio-sprd.o
new file mode 100644
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi@ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <dt-bindings/gpio/gpio.h>
+
+enum gpio_shared_mode {
+ GPIO_SHARED_AND = 0,
+ GPIO_SHARED_OR,
+};
+
+struct gpio_client {
+ unsigned requested:1;
+ int value;
+};
+
+struct gpio_shared_priv {
+ struct device *dev;
+ struct gpio_desc *root_gpio;
+
+ struct gpio_chip gpio_chip;
+ enum gpio_shared_mode share_mode;
+ int root_value;
+
+ struct mutex mutex; /* protecting the counters */
+ int high_count;
+ int low_count;
+
+ /* root gpio calbacks */
+ int (*root_get)(const struct gpio_desc *desc);
+ void (*root_set)(struct gpio_desc *desc, int value);
+
+ struct gpio_client *clients;
+};
+
+static int gpio_shared_aggregate_root_value(struct gpio_shared_priv *priv)
+{
+ int value = 0;
+ int i;
+
+ for (i = 0; i < priv->gpio_chip.ngpio; i++) {
+ if (priv->clients[i].requested) {
+ if (priv->share_mode == GPIO_SHARED_AND)
+ value &= priv->clients[i].value;
+ else
+ value |= priv->clients[i].value;
+ }
+ }
+
+ return value;
+}
+
+static int gpio_shared_gpio_request(struct gpio_chip *chip, unsigned int offset)
+{
+ struct gpio_shared_priv *priv = gpiochip_get_data(chip);
+ int ret = 0;
+
+ if (priv->clients[offset].requested) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ mutex_lock(&priv->mutex);
+ priv->clients[offset].requested = 1;
+ priv->clients[offset].value = priv->root_value;
+
+out:
+ mutex_unlock(&priv->mutex);
+ return ret;
+}
+
+static void gpio_shared_gpio_free(struct gpio_chip *chip, unsigned int offset)
+{
+ struct gpio_shared_priv *priv = gpiochip_get_data(chip);
+
+ priv->clients[offset].requested = 0;
+}
+
+static void gpio_shared_gpio_set(struct gpio_chip *chip, unsigned int offset,
+ int value)
+{
+ struct gpio_shared_priv *priv = gpiochip_get_data(chip);
+ int root_value;
+
+ mutex_lock(&priv->mutex);
+ priv->clients[offset].value = value;
+
+ root_value = gpio_shared_aggregate_root_value(priv);
+ if (priv->root_value != root_value) {
+ priv->root_set(priv->root_gpio, root_value);
+
+ /* Update the root's and client's value for the change */
+ priv->root_value = root_value;
+ }
+ mutex_unlock(&priv->mutex);
+}
+
+static int gpio_shared_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct gpio_shared_priv *priv = gpiochip_get_data(chip);
+ int value;
+
+ mutex_lock(&priv->mutex);
+ value = priv->clients[offset].value;
+ mutex_unlock(&priv->mutex);
+
+ return value;
+}
+
+static int gpio_shared_gpio_direction_out(struct gpio_chip *chip,
+ unsigned int offset, int value)
+{
+ gpio_shared_gpio_set(chip, offset, value);
+
+ return 0;
+}
+
+static const struct gpio_chip gpio_shared_template_chip = {
+ .owner = THIS_MODULE,
+ .request = gpio_shared_gpio_request,
+ .free = gpio_shared_gpio_free,
+ .set = gpio_shared_gpio_set,
+ .get = gpio_shared_gpio_get,
+ .direction_output = gpio_shared_gpio_direction_out,
+ .base = -1,
+};
+
+static const struct of_device_id gpio_shared_of_match[] = {
+ { .compatible = "gpio-shared", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, gpio_shared_of_match);
+
+static int gpio_shared_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct gpio_shared_priv *priv;
+ u32 val;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+
+ priv->gpio_chip = gpio_shared_template_chip;
+ priv->gpio_chip.label = dev_name(dev);
+ priv->gpio_chip.parent = dev;
+ priv->gpio_chip.of_node = dev->of_node;
+
+ ret = of_property_read_u32(dev->of_node, "branch-count", &val);
+ if (ret) {
+ dev_err(dev, "branch-count is not provided\n");
+ return ret;
+ }
+
+ priv->gpio_chip.ngpio = val;
+
+ priv->clients = devm_kcalloc(dev, priv->gpio_chip.ngpio,
+ sizeof(*priv->clients), GFP_KERNEL);
+ if (!priv->clients)
+ return -ENOMEM;
+
+ priv->root_gpio = devm_gpiod_get(dev, "root", GPIOD_ASIS);
+ if (IS_ERR(priv->root_gpio)) {
+ ret = PTR_ERR(priv->root_gpio);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to get root GPIO\n");
+
+ return ret;
+ }
+
+ /* If the root GPIO is input, change it to output */
+ if (gpiod_get_direction(priv->root_gpio))
+ gpiod_direction_output(priv->root_gpio, 0);
+
+ priv->gpio_chip.can_sleep = gpiod_cansleep(priv->root_gpio);
+ if (priv->gpio_chip.can_sleep) {
+ priv->root_get = gpiod_get_value_cansleep;
+ priv->root_set = gpiod_set_value_cansleep;
+ } else {
+ priv->root_get = gpiod_get_value;
+ priv->root_set = gpiod_set_value;
+ }
+
+ priv->root_value = priv->root_get(priv->root_gpio);
+
+ ret = of_property_read_u32(dev->of_node, "hold-active-state", &val);
+ if (ret)
+ val = GPIO_ACTIVE_LOW;
+
+ if (val == GPIO_ACTIVE_HIGH)
+ priv->share_mode = GPIO_SHARED_OR;
+
+ dev_set_drvdata(dev, priv);
+ mutex_init(&priv->mutex);
+
+ return devm_gpiochip_add_data(dev, &priv->gpio_chip, priv);
+}
+
+static int gpio_shared_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver gpio_shared_driver = {
+ .driver = {
+ .name = "gpio-shared",
+ .of_match_table = gpio_shared_of_match,
+ },
+ .probe = gpio_shared_probe,
+ .remove = gpio_shared_remove,
+};
+
+module_platform_driver(gpio_shared_driver);
+
+MODULE_ALIAS("platform:gpio-shared");
+MODULE_DESCRIPTION("Generic shared GPIO driver");
+MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>");
+MODULE_LICENSE("GPL v2");
Some board design opts to use the same GPIO line routed to different onboard components. The GPIO in question might be a reset line, enable line or mode selection line, etc. The drivers for the components do not know if in some board they have dedicated GPIO on other boards they might share a GPIO line with other entities, not necessary from the same class: Two codec sharing the same enable line One codec and one amplifier sharing the same line Regulators sharing the same line Display panels, backlights and touchscreen controllers And any variation of these. There is one thing usually the board designers make sure that the level needed for the GPIO is matching for the components. This driver adds a gpiochip to handle the board level split of a single GPIO line and based on the active users of the line it will handle the real GPIO to a level it should be: We have two cases to take care: 1. GPIO line should be LOW to enable any of the components if any of the shared line is requested to be LOW, set the GPIO line low 2. GPIO line should be HIGH to enable any of the components if any of the shared line is requested to be HIGH, set the GPIO line high At the end it is: 1. logical AND for the shared lines 2. logical OR for the shared lines Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-shared.c | 229 +++++++++++++++++++++++++++++++++++++ 3 files changed, 236 insertions(+) create mode 100644 drivers/gpio/gpio-shared.c -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki