diff mbox series

[05/20] ARM: dts: sun4i: Change pinctrl nodes to avoid warning

Message ID 5ed70f11299554e43f575aaf3b0bbe76991d8373.1507198895.git-series.maxime.ripard@free-electrons.com
State Superseded
Headers show
Series sunxi: Cleanup DT warnings for the A10 and A80 | expand

Commit Message

Maxime Ripard Oct. 5, 2017, 10:49 a.m. UTC 
All our pinctrl nodes were using a node name convention with a unit-address
to differentiate the different muxing options. However, since those nodes
didn't have a reg property, they were generating warnings in DTC.

In order to accomodate for this, convert the old nodes to the syntax we've
been using for the new SoCs, including removing the letter suffix of the
node labels to the bank of those pins to make things more readable.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

---
 arch/arm/boot/dts/sun4i-a10-a1000.dts                | 12 +-
 arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts           | 10 +-
 arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts      | 10 +-
 arch/arm/boot/dts/sun4i-a10-cubieboard.dts           | 16 +--
 arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts     | 12 +-
 arch/arm/boot/dts/sun4i-a10-gemei-g9.dts             |  8 +-
 arch/arm/boot/dts/sun4i-a10-hackberry.dts            |  8 +-
 arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts         |  6 +-
 arch/arm/boot/dts/sun4i-a10-inet1.dts                | 12 +-
 arch/arm/boot/dts/sun4i-a10-inet97fv2.dts            | 10 +-
 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts         | 10 +-
 arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 21 ++--
 arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts           | 10 +-
 arch/arm/boot/dts/sun4i-a10-marsboard.dts            | 16 +--
 arch/arm/boot/dts/sun4i-a10-mini-xplus.dts           | 10 +-
 arch/arm/boot/dts/sun4i-a10-mk802.dts                |  4 +-
 arch/arm/boot/dts/sun4i-a10-mk802ii.dts              |  6 +-
 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts       | 10 +-
 arch/arm/boot/dts/sun4i-a10-pcduino.dts              |  8 +-
 arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts     | 12 +-
 arch/arm/boot/dts/sun4i-a10.dtsi                     | 64 ++++++-------
 21 files changed, 141 insertions(+), 134 deletions(-)

-- 
git-series 0.9.1

Comments

Chen-Yu Tsai Oct. 5, 2017, 3:29 p.m. UTC | #1 
On Thu, Oct 5, 2017 at 6:49 PM, Maxime Ripard
<maxime.ripard@free-electrons.com> wrote:
> All our pinctrl nodes were using a node name convention with a unit-address

> to differentiate the different muxing options. However, since those nodes

> didn't have a reg property, they were generating warnings in DTC.

>

> In order to accomodate for this, convert the old nodes to the syntax we've

> been using for the new SoCs, including removing the letter suffix of the

> node labels to the bank of those pins to make things more readable.

>

> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

> ---

>  arch/arm/boot/dts/sun4i-a10-a1000.dts                | 12 +-

>  arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts           | 10 +-

>  arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts      | 10 +-

>  arch/arm/boot/dts/sun4i-a10-cubieboard.dts           | 16 +--

>  arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts     | 12 +-

>  arch/arm/boot/dts/sun4i-a10-gemei-g9.dts             |  8 +-

>  arch/arm/boot/dts/sun4i-a10-hackberry.dts            |  8 +-

>  arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts         |  6 +-

>  arch/arm/boot/dts/sun4i-a10-inet1.dts                | 12 +-

>  arch/arm/boot/dts/sun4i-a10-inet97fv2.dts            | 10 +-

>  arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts         | 10 +-

>  arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts | 21 ++--

>  arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts           | 10 +-

>  arch/arm/boot/dts/sun4i-a10-marsboard.dts            | 16 +--

>  arch/arm/boot/dts/sun4i-a10-mini-xplus.dts           | 10 +-

>  arch/arm/boot/dts/sun4i-a10-mk802.dts                |  4 +-

>  arch/arm/boot/dts/sun4i-a10-mk802ii.dts              |  6 +-

>  arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts       | 10 +-

>  arch/arm/boot/dts/sun4i-a10-pcduino.dts              |  8 +-

>  arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts     | 12 +-

>  arch/arm/boot/dts/sun4i-a10.dtsi                     | 64 ++++++-------

>  21 files changed, 141 insertions(+), 134 deletions(-)


[...]

> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi

> index 9671ac72fae9..b6e89de4c092 100644

> --- a/arch/arm/boot/dts/sun4i-a10.dtsi

> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi


[...]

> @@ -531,83 +531,83 @@

>                                 bias-pull-up;

>                         };

>

> -                       ps20_pins_a: ps20@0 {

> -                               pins = "PI20", "PI21";

> +                       ps2_ph_pins: ps2-ph-pins {

> +                               pins = "PH12", "PH13";

>                                 function = "ps2";

>                         };

>

> -                       ps21_pins_a: ps21@0 {

> -                               pins = "PH12", "PH13";

> +                       ps2_pi_pins: ps2-pi-pins {

> +                               pins = "PI20", "PI21";

>                                 function = "ps2";

>                         };


This part is slightly incorrect. The PS/2 block has 2 inputs.
The first channel, or ps2-0, has only one muxing option, on
pins PI20 and PI21. The second channel has two options, either
PH12 + PH13 or PI14 + PI15. The names should encode which channel
the muxing option is for.

ChenYu
Maxime Ripard Oct. 6, 2017, 8:45 a.m. UTC | #2 
Hi,

On Thu, Oct 05, 2017 at 03:29:56PM +0000, Chen-Yu Tsai wrote:
> > @@ -531,83 +531,83 @@

> >                                 bias-pull-up;

> >                         };

> >

> > -                       ps20_pins_a: ps20@0 {

> > -                               pins = "PI20", "PI21";

> > +                       ps2_ph_pins: ps2-ph-pins {

> > +                               pins = "PH12", "PH13";

> >                                 function = "ps2";

> >                         };

> >

> > -                       ps21_pins_a: ps21@0 {

> > -                               pins = "PH12", "PH13";

> > +                       ps2_pi_pins: ps2-pi-pins {

> > +                               pins = "PI20", "PI21";

> >                                 function = "ps2";

> >                         };

> 

> This part is slightly incorrect. The PS/2 block has 2 inputs.

> The first channel, or ps2-0, has only one muxing option, on

> pins PI20 and PI21. The second channel has two options, either

> PH12 + PH13 or PI14 + PI15. The names should encode which channel

> the muxing option is for.


Would ps2_ch0_pins and ps2_ch1_pi_pins work for you then?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index f80d37ddc4c6..1c12846227be 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -130,7 +130,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -141,7 +141,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -156,7 +156,7 @@ 
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -171,7 +171,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -236,13 +236,13 @@ 
 
 &spdif {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spdif_tx_pins_a>;
+	pinctrl-0 = <&spdif_tx_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 6b02de592a02..58fe2fc14f32 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -69,7 +69,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -80,7 +80,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -95,7 +95,7 @@ 
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -109,7 +109,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -147,7 +147,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index a7d61994b8fd..b34944188772 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -66,7 +66,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -81,13 +81,13 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5306de4: touchscreen@38 {
@@ -128,7 +128,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -164,7 +164,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 404ce7694899..d240209bfe85 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -100,7 +100,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -111,7 +111,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -122,13 +122,13 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -142,7 +142,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -221,14 +221,14 @@ 
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
index e0777ae808c7..a103b36f59a9 100644
--- a/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
+++ b/arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts
@@ -106,7 +106,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -119,14 +119,14 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -163,7 +163,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -211,7 +211,7 @@ 
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -250,7 +250,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
index d8bfd7b74916..deb80dd003a3 100644
--- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -92,7 +92,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -105,7 +105,7 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -146,7 +146,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
@@ -197,7 +197,7 @@ 
 
 &uart0  {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 856cfc9128e6..3d3a6a6ca566 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -81,7 +81,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy0>;
 	status = "okay";
 };
@@ -92,7 +92,7 @@ 
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -107,7 +107,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -156,6 +156,6 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index 6506595268b2..0c4437f0ef5c 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -64,7 +64,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -79,7 +79,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -116,7 +116,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts
index d51d8c302daf..f91ca46089af 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet1.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts
@@ -89,7 +89,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -102,7 +102,7 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -116,7 +116,7 @@ 
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5x: touchscreen@38 {
@@ -161,7 +161,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -203,7 +203,7 @@ 
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -246,7 +246,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index a8e479fe43ca..8f57832289f3 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -73,7 +73,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -86,13 +86,13 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -147,7 +147,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -208,7 +208,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
index 2acb89a87d41..71f22daefbdc 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
@@ -223,7 +223,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -236,7 +236,7 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	/* Accelerometer */
@@ -250,7 +250,7 @@ 
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	ft5406ee8: touchscreen@38 {
@@ -305,7 +305,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -376,7 +376,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
index 92e3e030ced3..d22bd79562d8 100644
--- a/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-itead-iteaduino-plus.dts
@@ -57,7 +57,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -67,6 +67,9 @@ 
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
 	axp209: pmic@34 {
 		interrupts = <0>;
 	};
@@ -74,19 +77,19 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -100,7 +103,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -114,7 +117,11 @@ 
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
+
+&uart0 {
+	pinctrl-0 = <&uart0_pb_pins>;
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
index 92b2d4af3d21..dcf1dd4fc90c 100644
--- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -99,7 +99,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -110,7 +110,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -125,7 +125,7 @@ 
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
@@ -140,7 +140,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -187,7 +187,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 0f927da28ee1..243f58f4323b 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -108,26 +108,26 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 };
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 };
 
@@ -141,7 +141,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -184,14 +184,14 @@ 
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>,
-		    <&spi0_cs0_pins_a>;
+	pinctrl-0 = <&spi0_pi_pins>,
+		    <&spi0_cs0_pi_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index a5ed9e4e22c6..3d3992d02b0e 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -71,7 +71,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -86,18 +86,18 @@ 
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins>;
 	status = "okay";
 };
 
-&ir0_rx_pins_a {
+&ir0_rx_pins {
 	/* The ir receiver is not always populated */
 	bias-pull-up;
 };
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -132,7 +132,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index 81db6824a2c7..57ee332c560f 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -72,7 +72,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -121,7 +121,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
index e74a881fd9a7..e86e765070d4 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
@@ -68,7 +68,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -83,7 +83,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -105,7 +105,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 462412ee903c..b49f1f503f69 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -99,7 +99,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -110,7 +110,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -125,7 +125,7 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	eeprom: eeprom@50 {
@@ -145,7 +145,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -210,7 +210,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 84f55e76df0c..f50f0ff00537 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -117,7 +117,7 @@ 
 
 &emac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_pins_a>;
+	pinctrl-0 = <&emac_pins>;
 	phy = <&phy1>;
 	status = "okay";
 };
@@ -128,7 +128,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -147,7 +147,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -214,7 +214,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
index c0f8c88b5a7d..65a149087e5f 100644
--- a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts
@@ -88,7 +88,7 @@ 
 
 &i2c0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
+	pinctrl-0 = <&i2c0_pins>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -101,14 +101,14 @@ 
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-0 = <&i2c1_pins>;
 	/* pull-ups and devices require AXP209 LDO3 */
 	status = "failed";
 };
 
 &i2c2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-0 = <&i2c2_pins>;
 	status = "okay";
 
 	pixcir_ts@5c {
@@ -149,7 +149,7 @@ 
 
 &mmc0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
+	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_vcc3v3>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
@@ -192,7 +192,7 @@ 
 
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
@@ -231,7 +231,7 @@ 
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 9671ac72fae9..b6e89de4c092 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -474,12 +474,12 @@ 
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			can0_pins_a: can0@0 {
+			can0_ph_pins: can0-ph-pins {
 				pins = "PH20", "PH21";
 				function = "can";
 			};
 
-			emac_pins_a: emac0@0 {
+			emac_pins: emac0-pins {
 				pins = "PA0", "PA1", "PA2",
 				       "PA3", "PA4", "PA5", "PA6",
 				       "PA7", "PA8", "PA9", "PA10",
@@ -488,42 +488,42 @@ 
 				function = "emac";
 			};
 
-			i2c0_pins_a: i2c0@0 {
+			i2c0_pins: i2c0-pins {
 				pins = "PB0", "PB1";
 				function = "i2c0";
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins: i2c1-pins {
 				pins = "PB18", "PB19";
 				function = "i2c1";
 			};
 
-			i2c2_pins_a: i2c2@0 {
+			i2c2_pins: i2c2-pins {
 				pins = "PB20", "PB21";
 				function = "i2c2";
 			};
 
-			ir0_rx_pins_a: ir0@0 {
+			ir0_rx_pins: ir0-rx-pin {
 				pins = "PB4";
 				function = "ir0";
 			};
 
-			ir0_tx_pins_a: ir0@1 {
+			ir0_tx_pins: ir0-tx-pin {
 				pins = "PB3";
 				function = "ir0";
 			};
 
-			ir1_rx_pins_a: ir1@0 {
+			ir1_rx_pins: ir1-rx-pin {
 				pins = "PB23";
 				function = "ir1";
 			};
 
-			ir1_tx_pins_a: ir1@1 {
+			ir1_tx_pins: ir1-tx-pin {
 				pins = "PB22";
 				function = "ir1";
 			};
 
-			mmc0_pins_a: mmc0@0 {
+			mmc0_pins: mmc0-pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
@@ -531,83 +531,83 @@ 
 				bias-pull-up;
 			};
 
-			ps20_pins_a: ps20@0 {
-				pins = "PI20", "PI21";
+			ps2_ph_pins: ps2-ph-pins {
+				pins = "PH12", "PH13";
 				function = "ps2";
 			};
 
-			ps21_pins_a: ps21@0 {
-				pins = "PH12", "PH13";
+			ps2_pi_pins: ps2-pi-pins {
+				pins = "PI20", "PI21";
 				function = "ps2";
 			};
 
-			pwm0_pins_a: pwm0@0 {
+			pwm0_pin: pwm0-pin {
 				pins = "PB2";
 				function = "pwm";
 			};
 
-			pwm1_pins_a: pwm1@0 {
+			pwm1_pin: pwm1-pin {
 				pins = "PI3";
 				function = "pwm";
 			};
 
-			spdif_tx_pins_a: spdif@0 {
+			spdif_tx_pin: spdif-tx-pin {
 				pins = "PB13";
 				function = "spdif";
 				bias-pull-up;
 			};
 
-			spi0_pins_a: spi0@0 {
+			spi0_pi_pins: spi0-pi-pins {
 				pins = "PI11", "PI12", "PI13";
 				function = "spi0";
 			};
 
-			spi0_cs0_pins_a: spi0_cs0@0 {
+			spi0_cs0_pi_pin: spi0-cs0-pi-pin {
 				pins = "PI10";
 				function = "spi0";
 			};
 
-			spi1_pins_a: spi1@0 {
+			spi1_pins: spi1-pins {
 				pins = "PI17", "PI18", "PI19";
 				function = "spi1";
 			};
 
-			spi1_cs0_pins_a: spi1_cs0@0 {
+			spi1_cs0_pin: spi1-cs0-pin {
 				pins = "PI16";
 				function = "spi1";
 			};
 
-			spi2_pins_a: spi2@0 {
-				pins = "PC20", "PC21", "PC22";
+			spi2_pb_pins: spi2-pb-pins {
+				pins = "PB15", "PB16", "PB17";
 				function = "spi2";
 			};
 
-			spi2_pins_b: spi2@1 {
-				pins = "PB15", "PB16", "PB17";
+			spi2_pc_pins: spi2-pc-pins {
+				pins = "PC20", "PC21", "PC22";
 				function = "spi2";
 			};
 
-			spi2_cs0_pins_a: spi2_cs0@0 {
-				pins = "PC19";
+			spi2_cs0_pb_pin: spi2-cs0-pb-pin {
+				pins = "PB14";
 				function = "spi2";
 			};
 
-			spi2_cs0_pins_b: spi2_cs0@1 {
-				pins = "PB14";
+			spi2_cs0_pc_pins: spi2-cs0-pc-pin {
+				pins = "PC19";
 				function = "spi2";
 			};
 
-			uart0_pins_a: uart0@0 {
+			uart0_pb_pins: uart0-pb-pins {
 				pins = "PB22", "PB23";
 				function = "uart0";
 			};
 
-			uart0_pins_b: uart0@1 {
+			uart0_pf_pins: uart0-pf-pins {
 				pins = "PF2", "PF4";
 				function = "uart0";
 			};
 
-			uart1_pins_a: uart1@0 {
+			uart1_pins: uart1-pins {
 				pins = "PA10", "PA11";
 				function = "uart1";
 			};