From patchwork Tue Feb 26 16:08:04 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rafael David Tinoco X-Patchwork-Id: 159225 Delivered-To: patch@linaro.org Received: by 2002:a02:5cc1:0:0:0:0:0 with SMTP id w62csp3383846jad; Tue, 26 Feb 2019 08:08:20 -0800 (PST) X-Google-Smtp-Source: AHgI3IayoSC3yVHFfI2VzTLE/jELKW2UQcmfJkR0YysVCPfUdKXTuiuEtG4OnQKv0rrGwIWKrcvP X-Received: by 2002:adf:e304:: with SMTP id b4mr17627584wrj.123.1551197300889; Tue, 26 Feb 2019 08:08:20 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1551197300; cv=none; d=google.com; s=arc-20160816; b=hCLvVv5d/1lkUBMdva14WNW4crDCtXPuw0d0Jg3qZIcXP+qf8sEOupPXoFtgpt2a2I 0r2XG1IhlFEz2FE1j+U1aAJ38EarrHsTKAbXrr8MoFyIzKsCtmCt8S56zIrHgjiiMDi2 VsNHncu3Vlr5S4VNNS9MUIWMqNM9A+NqIWyq1vdVBbcijso30kr39SRrsNM51gjIlMFQ AyugMCjrtmuNBxnohTi9rNSS3Iel9Ji1LyeIiw2VgDzp0kEIzBqxsJigI6e3GtPj0EB/ gSodMkcJWdHIBNy7iky1PyqtwMEI17zDtr74UX13FFjaiJhBEGdLPn5lxQNAPsbErfhj Zm4g== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:list-subscribe:list-help :list-post:list-archive:list-unsubscribe:list-id:precedence:subject :mime-version:references:in-reply-to:message-id:date:to:from :dkim-signature:delivered-to; bh=SAHvVvY1spw9YmRBuwsdVout+ldN7afjq+qOxAjLmdY=; b=y9daRVuRTetklBPQfrmx1t+wLNPkxb2qDNpLW2QDRV2dgW0i2CFh6FggkIy1xeI8HU ihsA/X0tmeMciTbstfj2qucLzOrPW0rOj10ldTADtaEQ/UlAGNu8vtnvsj0WDJ1tCe4V leKYkeikTLz83w2PYVgRrwRRJkxnpFqkuEbYTtBsrwQc6wyXCslU3J7+ueMCzkQwQJI1 MBL28IoS9AwCQgFsO2ZTLMaZ0vum8Vb/u+mItu9n9GPdAgMcGdAy+SGWY3Vpf/zUsjc5 3TfBM7q+8M2i8IihYN61jHuQRy0KcoXMPUkp9xJroCxMOEy8Nr6Cx3j6W/UkkCjHkOGe RwpA== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b="gJ3/vb8s"; spf=pass (google.com: domain of ltp-bounces+patch=linaro.org@lists.linux.it designates 2001:1418:10:5::2 as permitted sender) smtp.mailfrom="ltp-bounces+patch=linaro.org@lists.linux.it" Return-Path: Received: from picard.linux.it (picard.linux.it. [2001:1418:10:5::2]) by mx.google.com with ESMTPS id f185si7673104wmg.108.2019.02.26.08.08.20 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 26 Feb 2019 08:08:20 -0800 (PST) Received-SPF: pass (google.com: domain of ltp-bounces+patch=linaro.org@lists.linux.it designates 2001:1418:10:5::2 as permitted sender) client-ip=2001:1418:10:5::2; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b="gJ3/vb8s"; spf=pass (google.com: domain of ltp-bounces+patch=linaro.org@lists.linux.it designates 2001:1418:10:5::2 as permitted sender) smtp.mailfrom="ltp-bounces+patch=linaro.org@lists.linux.it" Received: from picard.linux.it (localhost [IPv6:::1]) by picard.linux.it (Postfix) with ESMTP id 61AA23EAFEA for ; Tue, 26 Feb 2019 17:08:20 +0100 (CET) X-Original-To: ltp@lists.linux.it Delivered-To: ltp@picard.linux.it Received: from in-5.smtp.seeweb.it (in-5.smtp.seeweb.it [217.194.8.5]) by picard.linux.it (Postfix) with ESMTP id C630E3EAEB4 for ; Tue, 26 Feb 2019 17:08:13 +0100 (CET) Received: from mail-qt1-x841.google.com (mail-qt1-x841.google.com [IPv6:2607:f8b0:4864:20::841]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by in-5.smtp.seeweb.it (Postfix) with ESMTPS id E97C26007B9 for ; Tue, 26 Feb 2019 17:08:13 +0100 (CET) Received: by mail-qt1-x841.google.com with SMTP id d2so15409688qti.11 for ; Tue, 26 Feb 2019 08:08:12 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=5HKKjEHC+4wrtTSWKwh3bQXA1LD7kAxdxaMn9Qm7Unc=; b=gJ3/vb8s3f3nWA9B85qc5rw9gGU34YNxUtpjgPZ+iOqfXmLYcWK5IfqaHMvadxXkYP jZucAhzTWdhrPxKxkl/I6mtbLhA+a5qJfHZ1T+reYtobZ/83kqvGWJgnvNytGZRFJzv5 iHXQBZSmM++959/smED/mRJjJnriPH3+YZ5W+roO0MIMOba7eGUVM9JflvhL7c2pOrjU ZJsatm4R/A2TUnA+aY2quEEfzJY7idVjIBUNrbhmVMOCFDB5I0m6IA3U2ro+x4Z2RE8i KxX8FPVULqu0Sg1vV54NyNtqBFjfgW3mRr7Vr4LCyVBGvb2/eGlLMQk62w/1kIrX9m1y Bi8Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=5HKKjEHC+4wrtTSWKwh3bQXA1LD7kAxdxaMn9Qm7Unc=; b=bdbp0S3gmSDbgWhLUzAkYHxuT2JKm+AVzAmZV6y87296FqG5qE3gBQh2RSoDwUcAtE 1y3YyEGbabWNFrjG/9ooVOBV3SnADPUpiodJ4ML/C2cqiqD1dcokcqyFeD0aQ6rYHwkH KcCPDTmofgZ/mvzad3H6edTWnpJr6uKCRN1ASPrpHlnB4Tp03SV2z+G3QbbAcBqHT4j+ sgVssdEzsYPOwCpx6FCftv62BjXdMoPNirHSLvuPPl1lGpK3z7oCBqlBvSGC3m/mf4gb h8vmqZHWtcaXVgdPvIxDcoicN7Rh5i/7hM7cm6x18ebeJvey/wfvX4ExGV+7/d99Pjik D+QA== X-Gm-Message-State: AHQUAubOL0Pj0XJ9m2EJPdV3/NuXinMT/zMJ82N+LsshLFh09otvYJZ0 hzpD+n6TlLX9MFKuG2fRAdsm+9Ax+Xs= X-Received: by 2002:ac8:1bb7:: with SMTP id z52mr19054282qtj.294.1551197291012; Tue, 26 Feb 2019 08:08:11 -0800 (PST) Received: from workstation.celeiro.br ([191.177.185.157]) by smtp.gmail.com with ESMTPSA id d63sm10276635qka.22.2019.02.26.08.08.09 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 26 Feb 2019 08:08:10 -0800 (PST) From: Rafael David Tinoco To: ltp@lists.linux.it Date: Tue, 26 Feb 2019 13:08:04 -0300 Message-Id: <20190226160804.16596-2-rafael.tinoco@linaro.org> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190226160804.16596-1-rafael.tinoco@linaro.org> References: <20190226001716.GA12569@dell5510> <20190226160804.16596-1-rafael.tinoco@linaro.org> MIME-Version: 1.0 X-Virus-Scanned: clamav-milter 0.99.2 at in-5.smtp.seeweb.it X-Virus-Status: Clean X-Spam-Status: No, score=0.1 required=7.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU,SPF_PASS autolearn=disabled version=3.4.0 X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on in-5.smtp.seeweb.it Subject: [LTP] [PATCH v3 2/2] syscalls/clock_adjtime: create clock_adjtime syscall tests X-BeenThere: ltp@lists.linux.it X-Mailman-Version: 2.1.18 Precedence: list List-Id: Linux Test Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: ltp-bounces+patch=linaro.org@lists.linux.it Sender: "ltp" Fixes: 270 clock_adjtime{01,02} are created using the new API, based on existing adjtimex(2) tests. clock_adjtime() syscall might have as execution path: 1) a regular POSIX clock (only REALTIME clock implements adjtime()) - will behave exactly like adjtimex() system call. - only one being tested here. 2) a dynamic POSIX clock (which ops are implemented by PTP clocks) - will trigger the PTP clock driver function "adjtime()" - different implementations from one PTP clock to another - might return EOPNOTSUPP (like ptp_kvm_caps, for example) - no observed execution entry point for clock_adjtime() Signed-off-by: Rafael David Tinoco --- runtest/syscalls | 3 + .../kernel/syscalls/clock_adjtime/.gitignore | 2 + .../kernel/syscalls/clock_adjtime/Makefile | 10 + .../syscalls/clock_adjtime/clock_adjtime01.c | 249 +++++++++++++++++ .../syscalls/clock_adjtime/clock_adjtime02.c | 261 ++++++++++++++++++ 5 files changed, 525 insertions(+) create mode 100644 testcases/kernel/syscalls/clock_adjtime/.gitignore create mode 100644 testcases/kernel/syscalls/clock_adjtime/Makefile create mode 100644 testcases/kernel/syscalls/clock_adjtime/clock_adjtime01.c create mode 100644 testcases/kernel/syscalls/clock_adjtime/clock_adjtime02.c diff --git a/runtest/syscalls b/runtest/syscalls index 0af0f4475..49411d65c 100644 --- a/runtest/syscalls +++ b/runtest/syscalls @@ -74,6 +74,9 @@ chroot02 chroot02 chroot03 chroot03 chroot04 chroot04 +clock_adjtime01 clock_adjtime01 +clock_adjtime02 clock_adjtime02 + clock_getres01 clock_getres01 clock_nanosleep01 clock_nanosleep01 clock_nanosleep02 clock_nanosleep02 diff --git a/testcases/kernel/syscalls/clock_adjtime/.gitignore b/testcases/kernel/syscalls/clock_adjtime/.gitignore new file mode 100644 index 000000000..28d5a1d45 --- /dev/null +++ b/testcases/kernel/syscalls/clock_adjtime/.gitignore @@ -0,0 +1,2 @@ +clock_adjtime01 +clock_adjtime02 diff --git a/testcases/kernel/syscalls/clock_adjtime/Makefile b/testcases/kernel/syscalls/clock_adjtime/Makefile new file mode 100644 index 000000000..79f671f1c --- /dev/null +++ b/testcases/kernel/syscalls/clock_adjtime/Makefile @@ -0,0 +1,10 @@ +# Copyright (c) 2019 - Linaro Limited. All rights reserved. +# SPDX-License-Identifier: GPL-2.0-or-later + +top_srcdir ?= ../../../.. + +include $(top_srcdir)/include/mk/testcases.mk + +LDLIBS+=-lrt + +include $(top_srcdir)/include/mk/generic_leaf_target.mk \ No newline at end of file diff --git a/testcases/kernel/syscalls/clock_adjtime/clock_adjtime01.c b/testcases/kernel/syscalls/clock_adjtime/clock_adjtime01.c new file mode 100644 index 000000000..999865b96 --- /dev/null +++ b/testcases/kernel/syscalls/clock_adjtime/clock_adjtime01.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2019 Linaro Limited. All rights reserved. + * Author: Rafael David Tinoco + */ + +/* + * clock_adjtime() syscall might have as execution path: + * + * 1) a regular POSIX clock (only REALTIME clock implements adjtime()) + * - will behave exactly like adjtimex() system call. + * - only one being tested here. + * + * 2) a dynamic POSIX clock (which ops are implemented by PTP clocks) + * - will trigger the PTP clock driver function "adjtime()" + * - different implementations from one PTP clock to another + * - might return EOPNOTSUPP (like ptp_kvm_caps, for example) + * - no entry point for clock_adjtime(), missing "CLOCK_PTP" model + * + * so it is sane to check possible adjustments: + * + * - ADJ_OFFSET - usec or nsec, kernel adjusts time gradually by offset + * (-512000 < offset < 512000) + * - ADJ_FREQUENCY - system clock frequency offset + * - ADJ_MAXERROR - maximum error (usec) + * - ADJ_ESTERROR - estimated time error in us + * - ADJ_STATUS - clock command/status of ntp implementation + * - ADJ_TIMECONST - PLL stiffness (jitter dependent) + poll int for PLL + * - ADJ_TICK - us between clock ticks + * (>= 900000/HZ, <= 1100000/HZ) + * + * and also the standalone ones (using .offset variable): + * + * - ADJ_OFFSET_SINGLESHOT - behave like adjtime() + * - ADJ_OFFSET_SS_READ - ret remaining time for completion after SINGLESHOT + * + * For ADJ_STATUS, consider the following flags: + * + * rw STA_PLL - enable phase-locked loop updates (ADJ_OFFSET) + * rw STA_PPSFREQ - enable PPS (pulse-per-second) freq discipline + * rw STA_PPSTIME - enable PPS time discipline + * rw STA_FLL - select freq-locked loop mode. + * rw STA_INS - ins leap sec after the last sec of UTC day (all days) + * rw STA_DEL - del leap sec at last sec of UTC day (all days) + * rw STA_UNSYNC - clock unsynced + * rw STA_FREQHOLD - hold freq. ADJ_OFFSET made w/out auto small adjs + * ro STA_PPSSIGNAL - valid PPS (pulse-per-second) signal is present + * ro STA_PPSJITTER - PPS signal jitter exceeded. + * ro STA_PPSWANDER - PPS signal wander exceeded. + * ro STA_PPSERROR - PPS signal calibration error. + * ro STA_CLOKERR - clock HW fault. + * ro STA_NANO - 0 = us, 1 = ns (set = ADJ_NANO, cl = ADJ_MICRO) + * rw STA_MODE - mode: 0 = phased locked loop. 1 = freq locked loop + * ro STA_CLK - clock source. unused. + */ + +#include "config.h" +#include "tst_test.h" +#include "lapi/syscalls.h" +#include "lapi/posix_clocks.h" +#include "tst_timer.h" +#include "tst_safe_clocks.h" +#include + +static long hz; +static struct timex saved, ttxc; + +#define ADJ_ALL (ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \ + ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK) + +struct test_case { + unsigned int modes; + long highlimit; + long *ptr; + long delta; +}; + +struct test_case tc[] = { + { + .modes = ADJ_OFFSET_SINGLESHOT, + }, + { + .modes = ADJ_OFFSET_SS_READ, + }, + { + .modes = ADJ_ALL, + }, + { + .modes = ADJ_OFFSET, + .highlimit = 512000, + .ptr = &ttxc.offset, + .delta = 10000, + }, + { + .modes = ADJ_FREQUENCY, + .ptr = &ttxc.freq, + .delta = 100, + }, + { + .modes = ADJ_MAXERROR, + .ptr = &ttxc.maxerror, + .delta = 100, + }, + { + .modes = ADJ_ESTERROR, + .ptr = &ttxc.esterror, + .delta = 100, + }, + { + .modes = ADJ_TIMECONST, + .ptr = &ttxc.constant, + .delta = 1, + }, + { + .modes = ADJ_TICK, + .highlimit = 1100000, + .ptr = &ttxc.tick, + .delta = 1000, + }, +}; + +/* + * bad pointer w/ libc causes SIGSEGV signal, call syscall directly + */ +static int sys_clock_adjtime(clockid_t clk_id, struct timex *txc) +{ + return tst_syscall(__NR_clock_adjtime, clk_id, txc); +} + +static void timex_show(char *given, struct timex txc) +{ + tst_res(TINFO, "%s\n" + " mode: %d\n" + " offset: %ld\n" + " frequency: %ld\n" + " maxerror: %ld\n" + " esterror: %ld\n" + " status: %d (0x%x)\n" + " time_constant: %ld\n" + " precision: %ld\n" + " tolerance: %ld\n" + " tick: %ld\n" + " raw time: %d(s) %d(us)", + given, + txc.modes, + txc.offset, + txc.freq, + txc.maxerror, + txc.esterror, + txc.status, + txc.status, + txc.constant, + txc.precision, + txc.tolerance, + txc.tick, + (int)txc.time.tv_sec, + (int)txc.time.tv_usec); +} + +static void verify_clock_adjtime(unsigned int i) +{ + long ptroff, *ptr = NULL; + struct timex verify; + + memset(&ttxc, 0, sizeof(struct timex)); + memset(&verify, 0, sizeof(struct timex)); + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &ttxc); + timex_show("GET", ttxc); + + ttxc.modes = tc[i].modes; + + if (tc[i].ptr && tc[i].delta) { + + *tc[i].ptr += tc[i].delta; + + /* fix limits, if existent, so no errors occur */ + + if (tc[i].highlimit) { + if (*tc[i].ptr >= tc[i].highlimit) + *tc[i].ptr -= (2 * tc[i].delta); + } + } + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &ttxc); + timex_show("SET", ttxc); + + if (tc[i].ptr) { + + /* adjtimex field being tested so we can verify later */ + + ptroff = (long) tc[i].ptr - (long) &ttxc; + ptr = (void *) &verify + ptroff; + } + + TEST(sys_clock_adjtime(CLOCK_REALTIME, &verify)); + timex_show("VERIFY", verify); + + if (tc[i].ptr && *tc[i].ptr != *ptr) { + tst_res(TFAIL, "clock_adjtime(): could not set value (mode=%x)", + tc[i].modes); + } + + if (TST_RET < 0) { + tst_res(TFAIL | TTERRNO, "clock_adjtime(): mode=%x, returned " + "error", tc[i].modes); + } + + tst_res(TPASS, "clock_adjtime(): success (mode=%x)", tc[i].modes); +} + +static void setup(void) +{ + size_t i; + + hz = SAFE_SYSCONF(_SC_CLK_TCK); + + /* fix high and low limits by dividing it per HZ value */ + for (i = 0; i < ARRAY_SIZE(tc); i++) { + if (tc[i].modes == ADJ_TICK) + tc[i].highlimit /= hz; + } + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved); +} + +static void cleanup(void) +{ + saved.modes = ADJ_ALL; + + /* restore clock resolution based on original status flag */ + + if (saved.status & STA_NANO) + saved.modes |= ADJ_NANO; + else + saved.modes |= ADJ_MICRO; + + /* restore original clock flags */ + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved); +} + +static struct tst_test test = { + .test = verify_clock_adjtime, + .setup = setup, + .cleanup = cleanup, + .tcnt = ARRAY_SIZE(tc), + .needs_root = 1, +}; diff --git a/testcases/kernel/syscalls/clock_adjtime/clock_adjtime02.c b/testcases/kernel/syscalls/clock_adjtime/clock_adjtime02.c new file mode 100644 index 000000000..05b4b0a18 --- /dev/null +++ b/testcases/kernel/syscalls/clock_adjtime/clock_adjtime02.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2019 Linaro Limited. All rights reserved. + * Author: Rafael David Tinoco + */ + +/* + * clock_adjtime() syscall might have as execution path: + * + * 1) a regular POSIX clock (only REALTIME clock implements adjtime()) + * - will behave exactly like adjtimex() system call. + * - only one being tested here. + * + * 2) a dynamic POSIX clock (which ops are implemented by PTP clocks) + * - will trigger the PTP clock driver function "adjtime()" + * - different implementations from one PTP clock to another + * - might return EOPNOTSUPP (like ptp_kvm_caps, for example) + * - no entry point for clock_adjtime(), missing "CLOCK_PTP" model + * + * so it is sane to check for the following errors: + * + * EINVAL - clock id being used does not exist + * + * EFAULT - (struct timex *) does not point to valid memory + * + * EINVAL - ADJ_OFFSET + .offset outside range -512000 < x < 512000 + * (after 2.6.26, kernels normalize to the limit if outside range) + * + * EINVAL - ADJ_FREQUENCY + .freq outside range -32768000 < x < 3276800 + * (after 2.6.26, kernels normalize to the limit if outside range) + * + * EINVAL - .tick outside permitted range (900000/HZ < .tick < 1100000/HZ) + * + * EPERM - .modes is neither 0 nor ADJ_OFFSET_SS_READ (CAP_SYS_TIME required) + * + * EINVAL - .status other than those listed bellow + * + * For ADJ_STATUS, consider the following flags: + * + * rw STA_PLL - enable phase-locked loop updates (ADJ_OFFSET) + * rw STA_PPSFREQ - enable PPS (pulse-per-second) freq discipline + * rw STA_PPSTIME - enable PPS time discipline + * rw STA_FLL - select freq-locked loop mode. + * rw STA_INS - ins leap sec after the last sec of UTC day (all days) + * rw STA_DEL - del leap sec at last sec of UTC day (all days) + * rw STA_UNSYNC - clock unsynced + * rw STA_FREQHOLD - hold freq. ADJ_OFFSET made w/out auto small adjs + * ro STA_PPSSIGNAL - valid PPS (pulse-per-second) signal is present + * ro STA_PPSJITTER - PPS signal jitter exceeded. + * ro STA_PPSWANDER - PPS signal wander exceeded. + * ro STA_PPSERROR - PPS signal calibration error. + * ro STA_CLOKERR - clock HW fault. + * ro STA_NANO - 0 = us, 1 = ns (set = ADJ_NANO, cl = ADJ_MICRO) + * rw STA_MODE - mode: 0 = phased locked loop. 1 = freq locked loop + * ro STA_CLK - clock source. unused. + */ + +#include "config.h" +#include "tst_test.h" +#include "lapi/syscalls.h" +#include "lapi/posix_clocks.h" +#include "tst_timer.h" +#include "tst_safe_clocks.h" +#include +#include + +#include + +static long hz; +static struct timex saved, ttxc; + +#define ADJ_ALL (ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \ + ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK) + +#define MAX_CLOCKS 16 + +struct test_case { + clockid_t clktype; + unsigned int modes; + long lowlimit; + long highlimit; + long *ptr; + long delta; + int exp_err; + int droproot; +}; + +struct test_case tc[] = { + { + .clktype = MAX_CLOCKS, + .exp_err = EINVAL, + }, + { + .clktype = MAX_CLOCKS + 1, + .exp_err = EINVAL, + }, + { + .clktype = CLOCK_REALTIME, + .modes = ADJ_ALL, + .exp_err = EFAULT, + }, + { + .clktype = CLOCK_REALTIME, + .modes = ADJ_TICK, + .lowlimit = 900000, + .ptr = &ttxc.tick, + .delta = 1, + .exp_err = EINVAL, + }, + { + .clktype = CLOCK_REALTIME, + .modes = ADJ_TICK, + .highlimit = 1100000, + .ptr = &ttxc.tick, + .delta = 1, + .exp_err = EINVAL, + }, + { + .clktype = CLOCK_REALTIME, + .modes = ADJ_ALL, + .exp_err = EPERM, + .droproot = 1, + }, +}; + +/* + * bad pointer w/ libc causes SIGSEGV signal, call syscall directly + */ +static int sys_clock_adjtime(clockid_t clk_id, struct timex *txc) +{ + return tst_syscall(__NR_clock_adjtime, clk_id, txc); +} + +static void timex_show(char *given, struct timex txc) +{ + tst_res(TINFO, "%s\n" + " mode: 0x%x\n" + " offset: %ld\n" + " frequency: %ld\n" + " maxerror: %ld\n" + " esterror: %ld\n" + " status: 0x%x\n" + " time_constant: %ld\n" + " precision: %ld\n" + " tolerance: %ld\n" + " tick: %ld\n" + " raw time: %d(s) %d(us)", + given, + txc.modes, + txc.offset, + txc.freq, + txc.maxerror, + txc.esterror, + txc.status, + txc.constant, + txc.precision, + txc.tolerance, + txc.tick, + (int)txc.time.tv_sec, + (int)txc.time.tv_usec); +} + +static void verify_clock_adjtime(unsigned int i) +{ + uid_t whoami = 0; + struct timex *txcptr; + struct passwd *nobody; + static const char name[] = "nobody"; + + txcptr = &ttxc; + + memset(txcptr, 0, sizeof(struct timex)); + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, txcptr); + timex_show("GET", *txcptr); + + if (tc[i].droproot) { + nobody = SAFE_GETPWNAM(name); + whoami = nobody->pw_uid; + SAFE_SETEUID(whoami); + } + + txcptr->modes = tc[i].modes; + + if (tc[i].ptr) { + + if (tc[i].lowlimit) + *tc[i].ptr = tc[i].lowlimit - tc[i].delta; + + if (tc[i].highlimit) + *tc[i].ptr = tc[i].highlimit + tc[i].delta; + } + + /* special case - if txcptr != NULL, SIGSEGV is throwed */ + if (tc[i].exp_err == EFAULT) + txcptr = NULL; + + TEST(sys_clock_adjtime(tc[i].clktype, txcptr)); + if (txcptr) + timex_show("TEST", *txcptr); + + if (TST_RET >= 0) { + tst_res(TFAIL, "clock_adjtime(): passed unexpectedly (mode=%x, " + "uid=%d)", tc[i].modes, whoami); + return; + } + + if (tc[i].exp_err != TST_ERR) { + tst_res(TFAIL | TTERRNO, "clock_adjtime(): expected %d but " + "failed with %d (mode=%x, uid=%d)", + tc[i].exp_err, TST_ERR, tc[i].modes, whoami); + return; + } + + tst_res(TPASS, "clock_adjtime(): failed as expected (mode=0x%x, " + "uid=%d)", tc[i].modes, whoami); + + if (tc[i].droproot) + SAFE_SETEUID(0); +} + +static void setup(void) +{ + size_t i; + + hz = SAFE_SYSCONF(_SC_CLK_TCK); + + /* fix high and low limits by dividing it per HZ value */ + for (i = 0; i < ARRAY_SIZE(tc); i++) { + if (tc[i].modes == ADJ_TICK) { + tc[i].highlimit /= hz; + tc[i].lowlimit /= hz; + } + } + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved); +} + +static void cleanup(void) +{ + saved.modes = ADJ_ALL; + + /* restore clock resolution based on original status flag */ + + if (saved.status & STA_NANO) + saved.modes |= ADJ_NANO; + else + saved.modes |= ADJ_MICRO; + + /* restore original clock flags */ + + SAFE_CLOCK_ADJTIME(CLOCK_REALTIME, &saved); +} + +static struct tst_test test = { + .test = verify_clock_adjtime, + .setup = setup, + .cleanup = cleanup, + .tcnt = ARRAY_SIZE(tc), + .needs_root = 1, +};