mbox series

[net-next,00/11] bnxt_en: Update for net-next.

Message ID 1601228540-20852-1-git-send-email-michael.chan@broadcom.com
Headers show
Series bnxt_en: Update for net-next. | expand

Message

Michael Chan Sept. 27, 2020, 5:42 p.m. UTC 
This patch series adds 2 main features to the bnxt_en driver: 200G
link speed support and FEC support with some refactoring of the
link speed logic.  The firmware interface is updated to have proper
support for these 2 features.  The ethtool preset max channel value
is also adjusted properly to account for XDP and TCs.

Edwin Peer (5):
  bnxt_en: refactor code to limit speed advertising
  bnxt_en: refactor bnxt_get_fw_speed()
  bnxt_en: add basic infrastructure to support PAM4 link speeds
  bnxt_en: ethtool: support PAM4 link speeds up to 200G
  bnxt_en: avoid link reset if speed is not changed

Michael Chan (6):
  bnxt_en: Update firmware interface spec to 1.10.1.65.
  bnxt_en: Handle ethernet link being disabled by firmware.
  bnxt_en: Report FEC settings to ethtool.
  bnxt_en: Report Active FEC encoding during link up.
  bnxt_en: Implement ethtool set_fec_param() method.
  bnxt_en: Improve preset max value for ethtool -l.

 drivers/net/ethernet/broadcom/bnxt/bnxt.c     | 168 ++++++--
 drivers/net/ethernet/broadcom/bnxt/bnxt.h     | 155 +++++---
 .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 294 ++++++++++++--
 drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h | 375 +++++++++++++++---
 .../net/ethernet/broadcom/bnxt/bnxt_sriov.c   |   2 +-
 5 files changed, 810 insertions(+), 184 deletions(-)

Comments

David Miller Sept. 27, 2020, 8:36 p.m. UTC | #1 
From: Michael Chan <michael.chan@broadcom.com>
Date: Sun, 27 Sep 2020 13:42:09 -0400

> This patch series adds 2 main features to the bnxt_en driver: 200G
> link speed support and FEC support with some refactoring of the
> link speed logic.  The firmware interface is updated to have proper
> support for these 2 features.  The ethtool preset max channel value
> is also adjusted properly to account for XDP and TCs.

Series applied, thanks Michael.