[net-next,0/5,pull,request] 1GbE Intel Wired LAN Driver Updates 2021-07-16

Vinicius Costa Gomes says:

Add support for steering traffic to specific RX queues using Flex Filters.

As the name implies, Flex Filters are more flexible than using
Layer-2, VLAN or MAC address filters, one of the reasons is that they
allow "AND" operations more easily, e.g. when the user wants to steer
some traffic based on the source MAC address and the packet ethertype.

Future work include adding support for offloading tc-u32 filters to
the hardware.

The series is divided as follows:

Patch 1/5, add the low level primitives for configuring Flex filters.

Patch 2/5 and 3/5, allow ethtool to manage Flex filters.

Patch 4/5, when specifying filters that have multiple predicates, use
Flex filters.

Patch 5/5, Adds support for exposing the i225 LEDs using the LED subsystem.

The following are changes since commit 919d527956daa3e7ad03a23ba661beb8a46cacf4:
  bnx2x: remove unused variable 'cur_data_offset'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 1GbE

Kurt Kanzenbach (4):
  igc: Add possibility to add flex filter
  igc: Integrate flex filter into ethtool ops
  igc: Make flex filter more flexible
  igc: Export LEDs

Vinicius Costa Gomes (1):
  igc: Allow for Flex Filters to be installed

 drivers/net/ethernet/intel/Kconfig           |   1 +
 drivers/net/ethernet/intel/igc/igc.h         |  48 +-
 drivers/net/ethernet/intel/igc/igc_defines.h |  62 ++-
 drivers/net/ethernet/intel/igc/igc_ethtool.c |  41 +-
 drivers/net/ethernet/intel/igc/igc_main.c    | 448 ++++++++++++++++++-
 drivers/net/ethernet/intel/igc/igc_regs.h    |  19 +
 6 files changed, 595 insertions(+), 24 deletions(-)

Hello:

This series was applied to netdev/net-next.git (refs/heads/master):

On Fri, 16 Jul 2021 14:24:22 -0700 you wrote:
> Vinicius Costa Gomes says:
> 
> Add support for steering traffic to specific RX queues using Flex Filters.
> 
> As the name implies, Flex Filters are more flexible than using
> Layer-2, VLAN or MAC address filters, one of the reasons is that they
> allow "AND" operations more easily, e.g. when the user wants to steer
> some traffic based on the source MAC address and the packet ethertype.
> 
> [...]

Here is the summary with links:
  - [net-next,1/5] igc: Add possibility to add flex filter
    https://git.kernel.org/netdev/net-next/c/6574631b50ed
  - [net-next,2/5] igc: Integrate flex filter into ethtool ops
    https://git.kernel.org/netdev/net-next/c/2b477d057e33
  - [net-next,3/5] igc: Allow for Flex Filters to be installed
    https://git.kernel.org/netdev/net-next/c/7991487ecb2d
  - [net-next,4/5] igc: Make flex filter more flexible
    https://git.kernel.org/netdev/net-next/c/73744262210c
  - [net-next,5/5] igc: Export LEDs
    https://git.kernel.org/netdev/net-next/c/cf8331825a8d

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html