@@ -772,7 +772,7 @@ static int ena_com_wait_and_process_admin_cq_interrupts(struct ena_comp_ctx *com
if (admin_queue->auto_polling)
admin_queue->polling = true;
} else {
- pr_err("The ena device doesn't send a completion for the admin cmd %d status %d\n",
+ pr_err("The ena device didn't send a completion for the admin cmd %d status %d\n",
comp_ctx->cmd_opcode, comp_ctx->status);
}
/* Check if shifted to polling mode.
@@ -393,7 +393,7 @@ struct ena_aenq_handlers {
*/
int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);
-/* ena_com_set_mmio_read_mode - Enable/disable the mmio reg read mechanism
+/* ena_com_set_mmio_read_mode - Enable/disable the indirect mmio reg read mechanism
* @ena_dev: ENA communication layer struct
* @readless_supported: readless mode (enable/disable)
*/
@@ -515,7 +515,7 @@ void ena_com_set_admin_auto_polling_mode(struct ena_com_dev *ena_dev,
/* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
* @ena_dev: ENA communication layer struct
*
- * This method go over the admin completion queue and wake up all the pending
+ * This method goes over the admin completion queue and wakes up all the pending
* threads that wait on the commands wait event.
*
* @note: Should be called after MSI-X interrupt.
@@ -525,7 +525,7 @@ void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
/* ena_com_aenq_intr_handler - AENQ interrupt handler
* @ena_dev: ENA communication layer struct
*
- * This method go over the async event notification queue and call the proper
+ * This method goes over the async event notification queue and calls the proper
* aenq handler.
*/
void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data);
@@ -542,14 +542,14 @@ void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);
/* ena_com_wait_for_abort_completion - Wait for admin commands abort.
* @ena_dev: ENA communication layer struct
*
- * This method wait until all the outstanding admin commands will be completed.
+ * This method waits until all the outstanding admin commands are completed.
*/
void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);
/* ena_com_validate_version - Validate the device parameters
* @ena_dev: ENA communication layer struct
*
- * This method validate the device parameters are the same as the saved
+ * This method verifies the device parameters are the same as the saved
* parameters in ena_dev.
* This method is useful after device reset, to validate the device mac address
* and the device offloads are the same as before the reset.
@@ -689,7 +689,7 @@ int ena_com_set_hash_function(struct ena_com_dev *ena_dev);
*
* Retrieve the hash function from the device.
*
- * @note: If the caller called ena_com_fill_hash_function but didn't flash
+ * @note: If the caller called ena_com_fill_hash_function but didn't flush
* it to the device, the new configuration will be lost.
*
* @return: 0 on Success and negative value otherwise.
@@ -703,7 +703,7 @@ int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
*
* Retrieve the hash key.
*
- * @note: If the caller called ena_com_fill_hash_key but didn't flash
+ * @note: If the caller called ena_com_fill_hash_key but didn't flush
* it to the device, the new configuration will be lost.
*
* @return: 0 on Success and negative value otherwise.
@@ -743,7 +743,7 @@ int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);
*
* Retrieve the hash control from the device.
*
- * @note, If the caller called ena_com_fill_hash_ctrl but didn't flash
+ * @note: If the caller called ena_com_fill_hash_ctrl but didn't flush
* it to the device, the new configuration will be lost.
*
* @return: 0 on Success and negative value otherwise.
@@ -795,7 +795,7 @@ int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);
*
* Retrieve the RSS indirection table from the device.
*
- * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flash
+ * @note: If the caller called ena_com_indirect_table_fill_entry but didn't flush
* it to the device, the new configuration will be lost.
*
* @return: 0 on Success and negative value otherwise.
@@ -821,14 +821,14 @@ int ena_com_allocate_debug_area(struct ena_com_dev *ena_dev,
/* ena_com_delete_debug_area - Free the debug area resources.
* @ena_dev: ENA communication layer struct
*
- * Free the allocate debug area.
+ * Free the allocated debug area.
*/
void ena_com_delete_debug_area(struct ena_com_dev *ena_dev);
/* ena_com_delete_host_info - Free the host info resources.
* @ena_dev: ENA communication layer struct
*
- * Free the allocate host info.
+ * Free the allocated host info.
*/
void ena_com_delete_host_info(struct ena_com_dev *ena_dev);
@@ -869,9 +869,9 @@ int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
* @cmd_completion: command completion return value.
* @cmd_comp_size: command completion size.
- * Submit an admin command and then wait until the device will return a
+ * Submit an admin command and then wait until the device returns a
* completion.
- * The completion will be copyed into cmd_comp.
+ * The completion will be copied into cmd_comp.
*
* @return - 0 on success, negative value on failure.
*/
@@ -934,7 +934,7 @@ unsigned int ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev *
/* ena_com_config_dev_mode - Configure the placement policy of the device.
* @ena_dev: ENA communication layer struct
* @llq_features: LLQ feature descriptor, retrieve via
- * ena_com_get_dev_attr_feat.
+ * ena_com_get_dev_attr_feat.
* @ena_llq_config: The default driver LLQ parameters configurations
*/
int ena_com_config_dev_mode(struct ena_com_dev *ena_dev,
@@ -960,7 +960,7 @@ static inline void ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_d
* @intr_reg: interrupt register to update.
* @rx_delay_interval: Rx interval in usecs
* @tx_delay_interval: Tx interval in usecs
- * @unmask: unask enable/disable
+ * @unmask: unmask enable/disable
*
* Prepare interrupt update register with the supplied parameters.
*/
@@ -4190,7 +4190,7 @@ static int ena_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
calc_queue_ctx.get_feat_ctx = &get_feat_ctx;
calc_queue_ctx.pdev = pdev;
- /* Initial Tx and RX interrupt delay. Assumes 1 usec granularity.
+ /* Initial TX and RX interrupt delay. Assumes 1 usec granularity.
* Updated during device initialization with the real granularity
*/
ena_dev->intr_moder_tx_interval = ENA_INTR_INITIAL_TX_INTERVAL_USECS;