From patchwork Sun Nov 5 23:19:09 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 117999 Delivered-To: patch@linaro.org Received: by 10.140.22.164 with SMTP id 33csp2167954qgn; Sun, 5 Nov 2017 15:23:31 -0800 (PST) X-Google-Smtp-Source: ABhQp+RvGizWtKx0darumuWxqJrX7AA0RcIYI3MimOs49EaZo8xbc0BNQIIJgZ3lazK/Shl7L5/0 X-Received: by 10.101.66.1 with SMTP id c1mr13471519pgq.100.1509924211840; Sun, 05 Nov 2017 15:23:31 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1509924211; cv=none; d=google.com; s=arc-20160816; b=Nvt9i8w99AkY1HdmGTHrAfOiIdA2POtUI7ab3OIqTBYyb+SsagUzoLTlrI2cgAMR/z 3a8v/lhMj+BO45beTj29PtO/6VxRkuFfULIVqMbgZub56K1o/JPhD47nNBhIMGtab5uu VPQ7QlR728O/sxZx7kcZpNPtg4Qn6Um5r07OSEYr9VLfAuCz1oBzLyBtlTTY3i7jUtxY cPs+qQPTsstpdWFGsmYc9FS03O8YTGxUtbpwrwlp70KikAIc3gBlpSpZLETZAyDytv1S 0040HEx//c1wuqr5yWkMkcOedvnvMhuLDi7le4z35iCSxUvT8sWdDPh8OzyjbqKuQl78 pgrA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature:arc-authentication-results; bh=WZW8HO+9UpUNGOjN0oWFwGZ/Gxd/Mnx9C1hM86UxvYY=; b=EjfvgMVd8C5vnHe3ljYug5QwqkBrl89GrRViBb9UFwROevsd1XfNs/BKErhaMQvrD6 yJz3YORMRrB1Z8WG1Nxyw4bL+xOqVVyBZ67O1EGJ7IeE+dVqEIFYQvYdf0/rDg5njNJd mZlQMFIudwbKnJSy1wz1ZeFFdWgTJ10QwbRSiB9BAWuM4LtIj+4/G7xAhylG4L3MfeQ9 LY8s8XucSclTRL2k2nrl13OtrmWQO90YDgpOmoBJdfJEmXD1wofYRv0ZphHJhK4fGO6G pb1rfGxxGkK7ip9PyrzMdqLh+LutffTNnQ/SrniGGhU+HYt1DKM92bfFH+/rt1C33t40 fdLA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=XeoOTZWO; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id m123si10384359pgm.712.2017.11.05.15.23.31; Sun, 05 Nov 2017 15:23:31 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=XeoOTZWO; spf=pass (google.com: best guess record for domain of netdev-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=netdev-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751207AbdKEXX3 (ORCPT + 7 others); Sun, 5 Nov 2017 18:23:29 -0500 Received: from mail-lf0-f41.google.com ([209.85.215.41]:52106 "EHLO mail-lf0-f41.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751134AbdKEXXW (ORCPT ); Sun, 5 Nov 2017 18:23:22 -0500 Received: by mail-lf0-f41.google.com with SMTP id r129so8608834lff.8 for ; Sun, 05 Nov 2017 15:23:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=WZW8HO+9UpUNGOjN0oWFwGZ/Gxd/Mnx9C1hM86UxvYY=; b=XeoOTZWOlQJaGs+kEHWr2erqk5ijdyEG4XlkYtRIazHBDtWZF2dNUmInm7NY4AU3T2 sHAW1e8cKUAAxonSwvVMo/XIX6Sivm7jWfOJsnOg8ZAXM/NnGwAgpP+QojD3P8eGW5yG 8WRpKFfxkpfleLfeO1Mm+WSR1Zxi5hZjoIzCA= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=WZW8HO+9UpUNGOjN0oWFwGZ/Gxd/Mnx9C1hM86UxvYY=; b=gWOvR/O83lzEyeCdgO2UYS6nPhsrAEJ3z6lpH5eVASW3iWtQdr733Ng0+B7V6wNGrt wyLqGH/qZh2FIbYToi1S1z0svNSq6pEvsFNFmgwGIaOjJhexNzeIj4GhrrK413iats1t HnyPJEJIm7KF/Q3f6ItsHPHuEriEnoB/+3/jEoUnHpfo5YukDdHwWobarZGg8yGWlT9w m6BHMiyboW8fcGMBewOP3vD0iuJW6ccRN/eBMYEAHQVlswoU8Bb0patXFNkuW5rTT+S0 BB9I7itWqr9CvSkTLVeM5lhH+3w5cg+QPDOTC3+ozAG1E17vkUy56ruOlOIdLYinp3Mc X7CQ== X-Gm-Message-State: AMCzsaUyFeKrzrHrHoWKLddXDPQLNnxx9hyEbwGrBZEjo8f7AiufVQHB 3NAYkVs6G1OKnN5qlAsjs+JvSmaWEWs= X-Received: by 10.25.24.105 with SMTP id o102mr4913935lfi.131.1509924200104; Sun, 05 Nov 2017 15:23:20 -0800 (PST) Received: from localhost.localdomain (c-567171d5.014-348-6c756e10.cust.bredbandsbolaget.se. [213.113.113.86]) by smtp.gmail.com with ESMTPSA id v29sm2357845ljv.27.2017.11.05.15.23.18 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sun, 05 Nov 2017 15:23:19 -0800 (PST) From: Linus Walleij To: Andrew Lunn , Vivien Didelot , Florian Fainelli Cc: netdev@vger.kernel.org, Linus Walleij , =?utf-8?b?QW50dGkgU2VwcMOkbMOk?= , Roman Yeryomin , Colin Leitner , Gabor Juhos Subject: [PATCH 4/4] RFC: net: dsa: realtek-smi: Add Realtek SMI driver Date: Mon, 6 Nov 2017 00:19:09 +0100 Message-Id: <20171105231909.5599-5-linus.walleij@linaro.org> X-Mailer: git-send-email 2.13.6 In-Reply-To: <20171105231909.5599-1-linus.walleij@linaro.org> References: <20171105231909.5599-1-linus.walleij@linaro.org> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org This adds a driver core for the Realtek SMI chips and a subdriver for the RTL8366RB. I just added this chip simply because it is all I can test. The code is a massaged variant of the code that has been sitting out-of-tree in OpenWRT for years in the absence of a proper switch subsystem. I have tried to credit the original authors wherever possible. The main changes I've done from the OpenWRT code: - Added a callback to set the MAC address. - Added an IRQ chip inside the RTL8366RB switch to demux and handle the line state IRQs. - Distributed the phy handling out to the PHY driver. - Added some RTL8366RB code that was missing in the driver, such as setting up "green ethernet" with a funny jam table and forcing MAC5 (the CPU port) into 1 GBit. Cc: Antti Seppälä Cc: Roman Yeryomin Cc: Colin Leitner Cc: Gabor Juhos Cc: Florian Fainelli Signed-off-by: Linus Walleij --- drivers/net/dsa/Kconfig | 12 + drivers/net/dsa/Makefile | 2 + drivers/net/dsa/realtek-smi.c | 436 ++++++++++++++++ drivers/net/dsa/realtek-smi.h | 145 ++++++ drivers/net/dsa/rtl8366.c | 493 ++++++++++++++++++ drivers/net/dsa/rtl8366rb.c | 1103 +++++++++++++++++++++++++++++++++++++++++ 6 files changed, 2191 insertions(+) create mode 100644 drivers/net/dsa/realtek-smi.c create mode 100644 drivers/net/dsa/realtek-smi.h create mode 100644 drivers/net/dsa/rtl8366.c create mode 100644 drivers/net/dsa/rtl8366rb.c -- 2.13.6 diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 83a9bc892a3b..d25fa9a35ad3 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -52,6 +52,18 @@ config NET_DSA_QCA8K This enables support for the Qualcomm Atheros QCA8K Ethernet switch chips. +config NET_DSA_RTK_SMI + tristate "Realtek SMI Ethernet switch family support" + depends on NET_DSA + # FIXME: select NET_DSA_TAG_RTK + select FIXED_PHY + select IRQ_DOMAIN + select REALTEK_PHY + select NET_DSA_TAG_TRAILER + ---help--- + This enables support for the Realtek SMI-based switch + chips, currently only RTL8366RB. + config NET_DSA_SMSC_LAN9303 tristate select NET_DSA_TAG_LAN9303 diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 4a5b5bd297ee..f660096cbad1 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -4,6 +4,8 @@ obj-$(CONFIG_NET_DSA_LOOP) += dsa_loop.o dsa_loop_bdinfo.o obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o +obj-$(CONFIG_NET_DSA_RTK_SMI) += realtek.o +realtek-objs := realtek-smi.o rtl8366.o rtl8366rb.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o obj-$(CONFIG_NET_DSA_SMSC_LAN9303_MDIO) += lan9303_mdio.o diff --git a/drivers/net/dsa/realtek-smi.c b/drivers/net/dsa/realtek-smi.c new file mode 100644 index 000000000000..de37b9a776fa --- /dev/null +++ b/drivers/net/dsa/realtek-smi.c @@ -0,0 +1,436 @@ +/* + * Realtek Simple Management Interface (SMI) driver + * It can be discussed how "simple" this interface is. + * + * The SMI protocol piggy-backs the MDIO MDC and MDIO signals levels + * but the protocol is not MDIO at all. Instead it is a Realtek + * pecularity that need to bit-bang the lines in a special way to + * communicate with the switch. + * + * ASICs we intend to support with this driver: + * + * RTL8366 - The original version, apparently + * RTL8369 - Similar enough to have the same datsheet as RTL8366 + * RTL8366RB - Probably reads out "RTL8366 revision B", has a quite + * different register layout from the other two + * RTL8366S - Is this "RTL8366 super"? + * RTL8367 - Has an OpenWRT driver as well + * RTL8368S - Seems to be an alternative name for RTL8366RB + * RTL8370 - Also uses SMI + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "realtek-smi.h" + +#define REALTEK_SMI_ACK_RETRY_COUNT 5 +#define REALTEK_SMI_HW_STOP_DELAY 25 /* msecs */ +#define REALTEK_SMI_HW_START_DELAY 100 /* msecs */ + +static inline void realtek_smi_clk_delay(struct realtek_smi *smi) +{ + ndelay(smi->clk_delay); +} + +static void realtek_smi_start(struct realtek_smi *smi) +{ + /* + * Set GPIO pins to output mode, with initial state: + * SCK = 0, SDA = 1 + */ + gpiod_direction_output(smi->mdc, 0); + gpiod_direction_output(smi->mdio, 1); + realtek_smi_clk_delay(smi); + + /* CLK 1: 0 -> 1, 1 -> 0 */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + + /* CLK 2: */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 1); +} + +static void realtek_smi_stop(struct realtek_smi *smi) +{ + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 0); + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdio, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 1); + + /* add a click */ + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 1); + + /* set GPIO pins to input mode */ + gpiod_direction_input(smi->mdio); + gpiod_direction_input(smi->mdc); +} + +static void realtek_smi_write_bits(struct realtek_smi *smi, u32 data, u32 len) +{ + for (; len > 0; len--) { + realtek_smi_clk_delay(smi); + + /* prepare data */ + gpiod_set_value(smi->mdio, !!(data & ( 1 << (len - 1)))); + realtek_smi_clk_delay(smi); + + /* clocking */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + gpiod_set_value(smi->mdc, 0); + } +} + +static void realtek_smi_read_bits(struct realtek_smi *smi, u32 len, u32 *data) +{ + gpiod_direction_input(smi->mdio); + + for (*data = 0; len > 0; len--) { + u32 u; + + realtek_smi_clk_delay(smi); + + /* clocking */ + gpiod_set_value(smi->mdc, 1); + realtek_smi_clk_delay(smi); + u = !!gpiod_get_value(smi->mdio); + gpiod_set_value(smi->mdc, 0); + + *data |= (u << (len - 1)); + } + + gpiod_direction_output(smi->mdio, 0); +} + +static int realtek_smi_wait_for_ack(struct realtek_smi *smi) +{ + int retry_cnt; + + retry_cnt = 0; + do { + u32 ack; + + realtek_smi_read_bits(smi, 1, &ack); + if (ack == 0) + break; + + if (++retry_cnt > REALTEK_SMI_ACK_RETRY_COUNT) { + dev_err(smi->dev, "ACK timeout\n"); + return -ETIMEDOUT; + } + } while (1); + + return 0; +} + +static int realtek_smi_write_byte(struct realtek_smi *smi, u8 data) +{ + realtek_smi_write_bits(smi, data, 8); + return realtek_smi_wait_for_ack(smi); +} + +static int realtek_smi_write_byte_noack(struct realtek_smi *smi, u8 data) +{ + realtek_smi_write_bits(smi, data, 8); + return 0; +} + +static int realtek_smi_read_byte0(struct realtek_smi *smi, u8 *data) +{ + u32 t; + + /* read data */ + realtek_smi_read_bits(smi, 8, &t); + *data = (t & 0xff); + + /* send an ACK */ + realtek_smi_write_bits(smi, 0x00, 1); + + return 0; +} + +static int realtek_smi_read_byte1(struct realtek_smi *smi, u8 *data) +{ + u32 t; + + /* read data */ + realtek_smi_read_bits(smi, 8, &t); + *data = (t & 0xff); + + /* send an ACK */ + realtek_smi_write_bits(smi, 0x01, 1); + + return 0; +} + +static int realtek_smi_read_reg(struct realtek_smi *smi, u32 addr, u32 *data) +{ + unsigned long flags; + u8 lo = 0; + u8 hi = 0; + int ret; + + spin_lock_irqsave(&smi->lock, flags); + + realtek_smi_start(smi); + + /* send READ command */ + ret = realtek_smi_write_byte(smi, smi->cmd_read); + if (ret) + goto out; + + /* set ADDR[7:0] */ + ret = realtek_smi_write_byte(smi, addr & 0xff); + if (ret) + goto out; + + /* set ADDR[15:8] */ + ret = realtek_smi_write_byte(smi, addr >> 8); + if (ret) + goto out; + + /* read DATA[7:0] */ + realtek_smi_read_byte0(smi, &lo); + /* read DATA[15:8] */ + realtek_smi_read_byte1(smi, &hi); + + *data = ((u32) lo) | (((u32) hi) << 8); + + ret = 0; + + out: + realtek_smi_stop(smi); + spin_unlock_irqrestore(&smi->lock, flags); + + return ret; +} + +static int realtek_smi_write_reg(struct realtek_smi *smi, + u32 addr, u32 data, bool ack) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&smi->lock, flags); + + realtek_smi_start(smi); + + /* send WRITE command */ + ret = realtek_smi_write_byte(smi, smi->cmd_write); + if (ret) + goto out; + + /* set ADDR[7:0] */ + ret = realtek_smi_write_byte(smi, addr & 0xff); + if (ret) + goto out; + + /* set ADDR[15:8] */ + ret = realtek_smi_write_byte(smi, addr >> 8); + if (ret) + goto out; + + /* write DATA[7:0] */ + ret = realtek_smi_write_byte(smi, data & 0xff); + if (ret) + goto out; + + /* write DATA[15:8] */ + if (ack) + ret = realtek_smi_write_byte(smi, data >> 8); + else + ret = realtek_smi_write_byte_noack(smi, data >> 8); + if (ret) + goto out; + + ret = 0; + + out: + realtek_smi_stop(smi); + spin_unlock_irqrestore(&smi->lock, flags); + + return ret; +} + +/* + * There is one single case when we need to use this accessor and that + * is when issueing soft reset. Since the device reset as soon as we write + * that bit, no ACK will come back for natural reasons. + */ +int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr, + u32 data) +{ + return realtek_smi_write_reg(smi, addr, data, false); +} +EXPORT_SYMBOL_GPL(realtek_smi_write_reg_noack); + +/* Regmap accessors */ + +static int realtek_smi_write(void *ctx, u32 reg, u32 val) +{ + struct realtek_smi *smi = ctx; + + return realtek_smi_write_reg(smi, reg, val, true); +} + +static int realtek_smi_read(void *ctx, u32 reg, u32 *val) +{ + struct realtek_smi *smi = ctx; + + return realtek_smi_read_reg(smi, reg, val); +} + +static const struct regmap_config realtek_smi_mdio_regmap_config = { + .reg_bits = 10, /* A4..A0 R4..R0 */ + .val_bits = 16, + .reg_stride = 1, + /* phy regs are at 0x8000 */ + .max_register = 0xffff, + .reg_format_endian = REGMAP_ENDIAN_LITTLE, + .reg_read = realtek_smi_read, + .reg_write = realtek_smi_write, + .cache_type = REGCACHE_NONE, +}; + +static int realtek_smi_probe(struct platform_device *pdev) +{ + struct realtek_smi *smi; + struct device *dev = &pdev->dev; + const struct realtek_smi_variant *var = of_device_get_match_data(dev); + int ret; + + smi = devm_kzalloc(dev, sizeof(*smi), GFP_KERNEL); + if (!smi) + return -ENOMEM; + smi->map = devm_regmap_init(dev, NULL, smi, + &realtek_smi_mdio_regmap_config); + if (IS_ERR(smi->map)) { + ret = PTR_ERR(smi->map); + dev_err(dev, "regmap init failed: %d\n", ret); + return ret; + } + + /* link forward and backward */ + smi->dev = dev; + smi->clk_delay = var->clk_delay; + smi->cmd_read = var->cmd_read; + smi->cmd_write = var->cmd_write; + smi->ops = var->ops; + + dev_set_drvdata(dev, smi); + spin_lock_init(&smi->lock); + + /* TODO: if power is software controlled, set up any regulators here */ + + /* Assert then deassert RESET */ + smi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(smi->reset)) { + dev_err(dev, "failed to get RESET GPIO\n"); + return PTR_ERR(smi->reset); + } + msleep(REALTEK_SMI_HW_STOP_DELAY); + gpiod_set_value(smi->reset, 0); + msleep(REALTEK_SMI_HW_START_DELAY); + dev_info(dev, "deasserted RESET\n"); + + /* Fetch MDIO pins */ + smi->mdc = devm_gpiod_get_optional(dev, "mdc", GPIOD_OUT_LOW); + if (IS_ERR(smi->mdc)) + return PTR_ERR(smi->mdc); + smi->mdio = devm_gpiod_get_optional(dev, "mdio", GPIOD_OUT_LOW); + if (IS_ERR(smi->mdio)) + return PTR_ERR(smi->mdio); + + ret = smi->ops->detect(smi); + if (ret) { + dev_err(dev, "unable to detect switch\n"); + return ret; + } + + smi->ds = dsa_switch_alloc(dev, smi->num_ports); + if (!smi->ds) + return -ENOMEM; + smi->ds->priv = smi; + smi->ds->ops = var->ds_ops; + + ret = dsa_register_switch(smi->ds); + if (ret) { + dev_err(dev, "unable to register switch ret = %d\n", ret); + return ret; + } + return 0; +} + +static int realtek_smi_remove(struct platform_device *pdev) +{ + struct realtek_smi *smi = dev_get_drvdata(&pdev->dev); + + dsa_unregister_switch(smi->ds); + gpiod_set_value(smi->reset, 1); + + return 0; +} + +static const struct of_device_id realtek_smi_of_match[] = { + { + .compatible = "realtek,rtl8366rb", + .data = &rtl8366rb_variant, + }, + { + /* FIXME: add support for RTL8366S and more */ + .compatible = "realtek,rtl8366s", + .data = NULL, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, realtek_smi_of_match); + +static struct platform_driver realtek_smi_driver = { + .driver = { + .name = "realtek-smi", + .of_match_table = of_match_ptr(realtek_smi_of_match), + }, + .probe = realtek_smi_probe, + .remove = realtek_smi_remove, +}; +module_platform_driver(realtek_smi_driver); diff --git a/drivers/net/dsa/realtek-smi.h b/drivers/net/dsa/realtek-smi.h new file mode 100644 index 000000000000..682895e932ab --- /dev/null +++ b/drivers/net/dsa/realtek-smi.h @@ -0,0 +1,145 @@ +/* + * Realtek SMI interface driver defines + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2009-2010 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#ifndef _REALTEK_SMI_H +#define _REALTEK_SMI_H + +#include +#include +#include +#include + +struct realtek_smi_ops; +struct dentry; +struct inode; +struct file; + +struct rtl8366_mib_counter { + unsigned base; + unsigned offset; + unsigned length; + const char *name; +}; + +struct rtl8366_vlan_mc { + u16 vid; + u16 untag; + u16 member; + u8 fid; + u8 priority; +}; + +struct rtl8366_vlan_4k { + u16 vid; + u16 untag; + u16 member; + u8 fid; +}; + +struct realtek_smi { + struct device *dev; + struct gpio_desc *reset; + struct gpio_desc *mdc; + struct gpio_desc *mdio; + struct regmap *map; + unsigned int clk_delay; + u8 cmd_read; + u8 cmd_write; + spinlock_t lock; + struct dsa_switch *ds; + struct irq_domain *irqdomain; + + unsigned int cpu_port; + unsigned int num_ports; + unsigned int num_vlan_mc; + unsigned int num_mib_counters; + struct rtl8366_mib_counter *mib_counters; + + const struct realtek_smi_ops *ops; + + int vlan_enabled; + int vlan4k_enabled; + + char buf[4096]; +#ifdef CONFIG_RTL8366_SMI_DEBUG_FS + struct dentry *debugfs_root; + u8 dbg_vlan_4k_page; +#endif +}; + +/** + * struct realtek_smi_ops - vtable for the per-SMI-chiptype operations + * @detect: detects the chiptype + */ +struct realtek_smi_ops { + int (*detect)(struct realtek_smi *smi); + int (*reset_chip)(struct realtek_smi *smi); + int (*setup)(struct realtek_smi *smi); + void (*cleanup)(struct realtek_smi *smi); + int (*get_mib_counter)(struct realtek_smi *smi, + int port, + struct rtl8366_mib_counter *mib, + u64 *mibvalue); + int (*get_vlan_mc)(struct realtek_smi *smi, u32 index, + struct rtl8366_vlan_mc *vlanmc); + int (*set_vlan_mc)(struct realtek_smi *smi, u32 index, + const struct rtl8366_vlan_mc *vlanmc); + int (*get_vlan_4k)(struct realtek_smi *smi, u32 vid, + struct rtl8366_vlan_4k *vlan4k); + int (*set_vlan_4k)(struct realtek_smi *smi, + const struct rtl8366_vlan_4k *vlan4k); + int (*get_mc_index)(struct realtek_smi *smi, int port, int *val); + int (*set_mc_index)(struct realtek_smi *smi, int port, int index); + bool (*is_vlan_valid)(struct realtek_smi *smi, unsigned vlan); + int (*enable_vlan)(struct realtek_smi *smi, bool enable); + int (*enable_vlan4k)(struct realtek_smi *smi, bool enable); + int (*enable_port)(struct realtek_smi *smi, int port, bool enable); +}; + +struct realtek_smi_variant { + const struct dsa_switch_ops *ds_ops; + const struct realtek_smi_ops *ops; + unsigned int clk_delay; + u8 cmd_read; + u8 cmd_write; +}; + +/* SMI core calls */ +int realtek_smi_write_reg_noack(struct realtek_smi *smi, u32 addr, + u32 data); + +/* RTL8366 library helpers */ +int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used); +int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, + u32 untag, u32 fid); +int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val); +int rtl8366_set_pvid(struct realtek_smi *smi, unsigned port, + unsigned vid); +int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable); +int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable); +int rtl8366_reset_vlan(struct realtek_smi *smi); +int rtl8366_init_vlan(struct realtek_smi *smi); +int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering); +int rtl8366_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct switchdev_trans *trans); +void rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct switchdev_trans *trans); +int rtl8366_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan); +void rtl8366_get_strings(struct dsa_switch *ds, int port, uint8_t *data); +int rtl8366_get_sset_count(struct dsa_switch *ds); +void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data); + +extern const struct realtek_smi_variant rtl8366rb_variant; + +#endif /* _REALTEK_SMI_H */ diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c new file mode 100644 index 000000000000..bb50cf9e2074 --- /dev/null +++ b/drivers/net/dsa/rtl8366.c @@ -0,0 +1,493 @@ +/* + * Realtek SMI library helpers for the RTL8366x variants + * RTL8366RB and RTL8366S + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2009-2010 Gabor Juhos + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include "realtek-smi.h" + +int rtl8366_mc_is_used(struct realtek_smi *smi, int mc_index, int *used) +{ + int ret; + int i; + + *used = 0; + for (i = 0; i < smi->num_ports; i++) { + int index = 0; + + ret = smi->ops->get_mc_index(smi, i, &index); + if (ret) + return ret; + + if (mc_index == index) { + *used = 1; + break; + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_mc_is_used); + +int rtl8366_set_vlan(struct realtek_smi *smi, int vid, u32 member, + u32 untag, u32 fid) +{ + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Update the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlan4k.member = member; + vlan4k.untag = untag; + vlan4k.fid = fid; + ret = smi->ops->set_vlan_4k(smi, &vlan4k); + if (ret) + return ret; + + /* Try to find an existing MC entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; + + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + /* update the MC entry */ + vlanmc.member = member; + vlanmc.untag = untag; + vlanmc.fid = fid; + + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + break; + } + } + + return ret; +} +EXPORT_SYMBOL_GPL(rtl8366_set_vlan); + +int rtl8366_get_pvid(struct realtek_smi *smi, int port, int *val) +{ + struct rtl8366_vlan_mc vlanmc; + int ret; + int index; + + ret = smi->ops->get_mc_index(smi, port, &index); + if (ret) + return ret; + + ret = smi->ops->get_vlan_mc(smi, index, &vlanmc); + if (ret) + return ret; + + *val = vlanmc.vid; + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_get_pvid); + +int rtl8366_set_pvid(struct realtek_smi *smi, unsigned port, + unsigned vid) +{ + struct rtl8366_vlan_mc vlanmc; + struct rtl8366_vlan_4k vlan4k; + int ret; + int i; + + /* Try to find an existing MC entry for this VID */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + /* We have no MC entry for this VID, try to find an empty one */ + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vlanmc.vid == 0 && vlanmc.member == 0) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc.vid = vid; + vlanmc.member = vlan4k.member; + vlanmc.untag = vlan4k.untag; + vlanmc.fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + /* MC table is full, try to find an unused entry and replace it */ + for (i = 0; i < smi->num_vlan_mc; i++) { + int used; + + ret = rtl8366_mc_is_used(smi, i, &used); + if (ret) + return ret; + + if (!used) { + /* Update the entry from the 4K table */ + ret = smi->ops->get_vlan_4k(smi, vid, &vlan4k); + if (ret) + return ret; + + vlanmc.vid = vid; + vlanmc.member = vlan4k.member; + vlanmc.untag = vlan4k.untag; + vlanmc.fid = vlan4k.fid; + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + ret = smi->ops->set_mc_index(smi, port, i); + return ret; + } + } + + dev_err(smi->dev, + "all VLAN member configurations are in use\n"); + + return -ENOSPC; +} +EXPORT_SYMBOL_GPL(rtl8366_set_pvid); + +int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable) +{ + int ret; + + if (enable) { + ret = smi->ops->enable_vlan(smi, true); + if (ret) + return ret; + + smi->vlan_enabled = true; + } + + ret = smi->ops->enable_vlan4k(smi, enable); + if (ret) + return ret; + + smi->vlan4k_enabled = enable; + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_enable_vlan4k); + +int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable) +{ + int ret; + + ret = smi->ops->enable_vlan(smi, true); + if (ret) + return ret; + + smi->vlan_enabled = enable; + + if (!enable) { + smi->vlan4k_enabled = false; + ret = smi->ops->enable_vlan4k(smi, false); + } + + return ret; +} +EXPORT_SYMBOL_GPL(rtl8366_enable_vlan); + +int rtl8366_reset_vlan(struct realtek_smi *smi) +{ + struct rtl8366_vlan_mc vlanmc; + int ret; + int i; + + rtl8366_enable_vlan(smi, false); + rtl8366_enable_vlan4k(smi, false); + + /* clear VLAN member configurations */ + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.member = 0; + vlanmc.untag = 0; + vlanmc.fid = 0; + for (i = 0; i < smi->num_vlan_mc; i++) { + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_reset_vlan); + +int rtl8366_init_vlan(struct realtek_smi *smi) +{ + int port; + int ret; + + ret = rtl8366_reset_vlan(smi); + if (ret) + return ret; + + for (port = 0; port < smi->num_ports; port++) { + u32 mask; + + if (port == smi->cpu_port) + mask = (1 << smi->num_ports) - 1; + else + mask = (1 << port) | (1 << smi->cpu_port); + + ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0); + if (ret) + return ret; + + ret = rtl8366_set_pvid(smi, port, (port + 1)); + if (ret) + return ret; + } + + return rtl8366_enable_vlan(smi, true); +} +EXPORT_SYMBOL_GPL(rtl8366_init_vlan); + +int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366_vlan_4k vlan4k; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return -EINVAL; + + dev_info(smi->dev, "%s filtering on port %d\n", + vlan_filtering ? "enable" : "disable", + port); + + /* + * FIXME: + * The hardware support filter ID (FID) 0..7, I have no clue how to + * support this in the driver when the callback only says on/off. + */ + ret = smi->ops->get_vlan_4k(smi, port, &vlan4k); + if (ret) + return ret; + + /* Just set the filter to FID 1 for now then */ + ret = rtl8366_set_vlan(smi, port, + vlan4k.member, + vlan4k.untag, + 1); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering); + +int rtl8366_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct switchdev_trans *trans) +{ + struct realtek_smi *smi = ds->priv; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return -EINVAL; + + dev_info(smi->dev, "prepare VLANs %04x..%04x\n", + vlan->vid_begin, vlan->vid_end); + + /* + * FIXME: what's with this 4k business? + * Just rtl8366_enable_vlan() seems inconclusive. + */ + + /* Enable VLAN in the hardware */ + ret = rtl8366_enable_vlan4k(smi, true); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_prepare); + +void rtl8366_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct switchdev_trans *trans) +{ + struct realtek_smi *smi = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + u32 member = 0; + u32 untag = 0; + u16 vid; + int ret; + + if (!smi->ops->is_vlan_valid(smi, port)) + return; + + dev_info(smi->dev, "add VLAN on port %d, %s, %s\n", + port, + untagged ? "untagged" : "tagged", + pvid ? " PVID" : "no PVID"); + + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) { + dev_err(smi->dev, "port is DSA or CPU port\n"); + } + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + int pvid_val = 0; + + dev_info(smi->dev, "add VLAN %04x\n", vid); + member |= BIT(port); + + if (untagged) + untag |= BIT(port); + + /* + * To ensure that we have a valid MC entry for this VLAN, + * initialize the port VLAN ID here. + */ + ret = rtl8366_get_pvid(smi, port, &pvid_val); + if (ret < 0) { + dev_err(smi->dev, "could not lookup PVID for port %d\n", + port); + return; + } + if (pvid_val == 0) { + ret = rtl8366_set_pvid(smi, port, vid); + if (ret < 0) + return; + } + } + + ret = rtl8366_set_vlan(smi, port, member, untag, 0); + if (ret) + dev_err(smi->dev, + "failed to set up VLAN %04x", + vid); +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_add); + +int rtl8366_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct realtek_smi *smi = ds->priv; + u16 vid; + int ret; + + dev_info(smi->dev, "del VLAN on port %d\n", port); + + for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) { + int i; + + dev_info(smi->dev, "del VLAN %04x\n", vid); + + for (i = 0; i < smi->num_vlan_mc; i++) { + struct rtl8366_vlan_mc vlanmc; + + ret = smi->ops->get_vlan_mc(smi, i, &vlanmc); + if (ret) + return ret; + + if (vid == vlanmc.vid) { + /* clear VLAN member configurations */ + vlanmc.vid = 0; + vlanmc.priority = 0; + vlanmc.member = 0; + vlanmc.untag = 0; + vlanmc.fid = 0; + + ret = smi->ops->set_vlan_mc(smi, i, &vlanmc); + if (ret) { + dev_err(smi->dev, + "failed to remove VLAN %04x\n", + vid); + return ret; + } + break; + } + } + } + + return 0; +} +EXPORT_SYMBOL_GPL(rtl8366_vlan_del); + +void rtl8366_get_strings(struct dsa_switch *ds, int port, uint8_t *data) +{ + struct realtek_smi *smi = ds->priv; + struct rtl8366_mib_counter *mib; + int i; + + if (port >= smi->num_ports) + return; + + for (i = 0; i < smi->num_mib_counters; i++) { + mib = &smi->mib_counters[i]; + memcpy(data + i * ETH_GSTRING_LEN, + mib->name, ETH_GSTRING_LEN); + } +} +EXPORT_SYMBOL_GPL(rtl8366_get_strings); + +int rtl8366_get_sset_count(struct dsa_switch *ds) +{ + struct realtek_smi *smi = ds->priv; + + return smi->num_mib_counters; +} +EXPORT_SYMBOL_GPL(rtl8366_get_sset_count); + +void rtl8366_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct realtek_smi *smi = ds->priv; + int i; + int ret; + + if (port >= smi->num_ports) + return; + + for (i = 0; i < smi->num_mib_counters; i++) { + struct rtl8366_mib_counter *mib; + u64 mibvalue; + + mib = &smi->mib_counters[i]; + ret = smi->ops->get_mib_counter(smi, port, mib, &mibvalue); + if (ret) { + dev_err(smi->dev, "error reading MIB counter %s\n", + mib->name); + } + data[i] = mibvalue; + } +} +EXPORT_SYMBOL_GPL(rtl8366_get_ethtool_stats); diff --git a/drivers/net/dsa/rtl8366rb.c b/drivers/net/dsa/rtl8366rb.c new file mode 100644 index 000000000000..765ca72cc399 --- /dev/null +++ b/drivers/net/dsa/rtl8366rb.c @@ -0,0 +1,1103 @@ +/* + * Realtek SMI subdriver for the Realtek RTL8366RB ethernet switch + * + * Copyright (C) 2017 Linus Walleij + * Copyright (C) 2009-2010 Gabor Juhos + * Copyright (C) 2010 Antti Seppälä + * Copyright (C) 2010 Roman Yeryomin + * Copyright (C) 2011 Colin Leitner + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +#include "realtek-smi.h" + +#define RTL8366RB_PORT_NUM_CPU 5 +#define RTL8366RB_NUM_PORTS 6 +#define RTL8366RB_PHY_NO_MAX 4 +#define RTL8366RB_PHY_ADDR_MAX 31 + +#define RTL8366RB_PAACR0 0x10 /* bits 0..7 = port 0, bits 8..15 = port 1 */ +#define RTL8366RB_PAACR1 0x11 /* bits 0..7 = port 2, bits 8..15 = port 3 */ +#define RTL8366RB_PAACR2 0x12 /* bits 0..7 = port 4, bits 8..15 = port 5 */ +#define RTL8366RB_PAACR_SPEED_10M 0 +#define RTL8366RB_PAACR_SPEED_100M 1 +#define RTL8366RB_PAACR_SPEED_1000M 2 +#define RTL8366RB_PAACR_FULL_DUPLEX BIT(2) +#define RTL8366RB_PAACR_LINK_UP BIT(4) +#define RTL8366RB_PAACR_TX_PAUSE BIT(5) +#define RTL8366RB_PAACR_RX_PAUSE BIT(6) +#define RTL8366RB_PAACR_AN BIT(7) + +#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \ + RTL8366RB_PAACR_FULL_DUPLEX | \ + RTL8366RB_PAACR_LINK_UP | \ + RTL8366RB_PAACR_TX_PAUSE | \ + RTL8366RB_PAACR_RX_PAUSE) + +#define RTL8366RB_PSTAT0 0x14 /* bits 0..7 = port 0, bits 8..15 = port 1 */ +#define RTL8366RB_PSTAT1 0x15 /* bits 0..7 = port 2, bits 8..15 = port 3 */ +#define RTL8366RB_PSTAT2 0x16 /* bits 0..7 = port 4, bits 8..15 = port 5 */ + +#define RTL8366RB_POWER_SAVING_REG 0x21 + +/* CPU port control reg */ +#define RTL8368RB_CPU_CTRL_REG 0x0061 +#define RTL8368RB_CPU_PORTS_OFF 0 +#define RTL8368RB_CPU_PORTS_MSK 0x00FF +#define RTL8368RB_CPU_INSTAG BIT(15) /* enables inserting custom tag length/type 8899 */ + +#define RTL8366RB_SMAR0 0x0070 /* bits 0..15 */ +#define RTL8366RB_SMAR1 0x0071 /* bits 16..31 */ +#define RTL8366RB_SMAR2 0x0072 /* bits 32..47 */ + +/* Switch Global Configuration register */ +#define RTL8366RB_SGCR 0x0000 +#define RTL8366RB_SGCR_EN_BC_STORM_CTRL BIT(0) +#define RTL8366RB_SGCR_MAX_LENGTH(_x) (_x << 4) +#define RTL8366RB_SGCR_MAX_LENGTH_MASK RTL8366RB_SGCR_MAX_LENGTH(0x3) +#define RTL8366RB_SGCR_MAX_LENGTH_1522 RTL8366RB_SGCR_MAX_LENGTH(0x0) +#define RTL8366RB_SGCR_MAX_LENGTH_1536 RTL8366RB_SGCR_MAX_LENGTH(0x1) +#define RTL8366RB_SGCR_MAX_LENGTH_1552 RTL8366RB_SGCR_MAX_LENGTH(0x2) +#define RTL8366RB_SGCR_MAX_LENGTH_9216 RTL8366RB_SGCR_MAX_LENGTH(0x3) +#define RTL8366RB_SGCR_EN_VLAN BIT(13) +#define RTL8366RB_SGCR_EN_VLAN_4KTB BIT(14) + +/* Port Enable Control register */ +#define RTL8366RB_PECR 0x0001 + +/* Port Mirror Control Register */ +#define RTL8366RB_PMCR 0x0007 +#define RTL8366RB_PMCR_SOURCE_PORT(_x) (_x) +#define RTL8366RB_PMCR_SOURCE_PORT_MASK 0x000f +#define RTL8366RB_PMCR_MONITOR_PORT(_x) ((_x) << 4) +#define RTL8366RB_PMCR_MONITOR_PORT_MASK 0x00f0 +#define RTL8366RB_PMCR_MIRROR_RX BIT(8) +#define RTL8366RB_PMCR_MIRROR_TX BIT(9) +#define RTL8366RB_PMCR_MIRROR_SPC BIT(10) +#define RTL8366RB_PMCR_MIRROR_ISO BIT(11) + +/* Switch Security Control registers */ +#define RTL8366RB_SSCR0 0x0002 +#define RTL8366RB_SSCR1 0x0003 +#define RTL8366RB_SSCR2 0x0004 +#define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0) + +#define RTL8366RB_RESET_CTRL_REG 0x0100 +#define RTL8366RB_CHIP_CTRL_RESET_HW 1 +#define RTL8366RB_CHIP_CTRL_RESET_SW (1 << 1) + +#define RTL8366RB_CHIP_ID_REG 0x0509 +#define RTL8366RB_CHIP_ID_8366 0x5937 +#define RTL8366RB_CHIP_VERSION_CTRL_REG 0x050A +#define RTL8366RB_CHIP_VERSION_MASK 0xf + +/* PHY registers control */ +#define RTL8366RB_PHY_ACCESS_CTRL_REG 0x8000 +#define RTL8366RB_PHY_CTRL_READ BIT(0) +#define RTL8366RB_PHY_CTRL_WRITE 0 +#define RTL8366RB_PHY_ACCESS_BUSY_REG 0x8001 +#define RTL8366RB_PHY_INT_BUSY BIT(0) +#define RTL8366RB_PHY_EXT_BUSY BIT(4) +#define RTL8366RB_PHY_ACCESS_DATA_REG 0x8002 +#define RTL8366RB_PHY_EXT_CTRL_REG 0x8010 +#define RTL8366RB_PHY_EXT_WRDATA_REG 0x8011 +#define RTL8366RB_PHY_EXT_RDDATA_REG 0x8012 + +#define RTL8366RB_PHY_REG_MASK 0x1f +#define RTL8366RB_PHY_PAGE_OFFSET 5 +#define RTL8366RB_PHY_PAGE_MASK (0xf << 5) +#define RTL8366RB_PHY_NO_OFFSET 9 +#define RTL8366RB_PHY_NO_MASK (0x1f << 9) + +#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f + +/* LED control registers */ +#define RTL8366RB_LED_BLINKRATE_REG 0x0430 +#define RTL8366RB_LED_BLINKRATE_BIT 0 +#define RTL8366RB_LED_BLINKRATE_MASK 0x0007 + +#define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_0_1_CTRL_REG 0x0432 +#define RTL8366RB_LED_2_3_CTRL_REG 0x0433 + +#define RTL8366RB_MIB_COUNT 33 +#define RTL8366RB_GLOBAL_MIB_COUNT 1 +#define RTL8366RB_MIB_COUNTER_PORT_OFFSET 0x0050 +#define RTL8366RB_MIB_COUNTER_BASE 0x1000 +#define RTL8366RB_MIB_CTRL_REG 0x13F0 +#define RTL8366RB_MIB_CTRL_USER_MASK 0x0FFC +#define RTL8366RB_MIB_CTRL_BUSY_MASK BIT(0) +#define RTL8366RB_MIB_CTRL_RESET_MASK BIT(1) +#define RTL8366RB_MIB_CTRL_PORT_RESET(_p) BIT(2 + (_p)) +#define RTL8366RB_MIB_CTRL_GLOBAL_RESET BIT(11) + +#define RTL8366RB_PORT_VLAN_CTRL_BASE 0x0063 +#define RTL8366RB_PORT_VLAN_CTRL_REG(_p) \ + (RTL8366RB_PORT_VLAN_CTRL_BASE + (_p) / 4) +#define RTL8366RB_PORT_VLAN_CTRL_MASK 0xf +#define RTL8366RB_PORT_VLAN_CTRL_SHIFT(_p) (4 * ((_p) % 4)) + +#define RTL8366RB_VLAN_TABLE_READ_BASE 0x018C +#define RTL8366RB_VLAN_TABLE_WRITE_BASE 0x0185 + +#define RTL8366RB_TABLE_ACCESS_CTRL_REG 0x0180 +#define RTL8366RB_TABLE_VLAN_READ_CTRL 0x0E01 +#define RTL8366RB_TABLE_VLAN_WRITE_CTRL 0x0F01 + +#define RTL8366RB_VLAN_MC_BASE(_x) (0x0020 + (_x) * 3) + +#define RTL8366RB_PORT_LINK_STATUS_BASE 0x0014 +#define RTL8366RB_PORT_STATUS_SPEED_MASK 0x0003 +#define RTL8366RB_PORT_STATUS_DUPLEX_MASK 0x0004 +#define RTL8366RB_PORT_STATUS_LINK_MASK 0x0010 +#define RTL8366RB_PORT_STATUS_TXPAUSE_MASK 0x0020 +#define RTL8366RB_PORT_STATUS_RXPAUSE_MASK 0x0040 +#define RTL8366RB_PORT_STATUS_AN_MASK 0x0080 + +#define RTL8366RB_NUM_VLANS 16 +#define RTL8366RB_NUM_LEDGROUPS 4 +#define RTL8366RB_NUM_VIDS 4096 +#define RTL8366RB_PRIORITYMAX 7 +#define RTL8366RB_FIDMAX 7 + +#define RTL8366RB_PORT_1 (1 << 0) /* In userspace port 0 */ +#define RTL8366RB_PORT_2 (1 << 1) /* In userspace port 1 */ +#define RTL8366RB_PORT_3 (1 << 2) /* In userspace port 2 */ +#define RTL8366RB_PORT_4 (1 << 3) /* In userspace port 3 */ +#define RTL8366RB_PORT_5 (1 << 4) /* In userspace port 4 */ + +#define RTL8366RB_PORT_CPU (1 << 5) /* CPU port */ + +#define RTL8366RB_PORT_ALL (RTL8366RB_PORT_1 | \ + RTL8366RB_PORT_2 | \ + RTL8366RB_PORT_3 | \ + RTL8366RB_PORT_4 | \ + RTL8366RB_PORT_5 | \ + RTL8366RB_PORT_CPU) + +#define RTL8366RB_PORT_ALL_BUT_CPU (RTL8366RB_PORT_1 | \ + RTL8366RB_PORT_2 | \ + RTL8366RB_PORT_3 | \ + RTL8366RB_PORT_4 | \ + RTL8366RB_PORT_5) + +#define RTL8366RB_PORT_ALL_EXTERNAL (RTL8366RB_PORT_1 | \ + RTL8366RB_PORT_2 | \ + RTL8366RB_PORT_3 | \ + RTL8366RB_PORT_4) + +#define RTL8366RB_PORT_ALL_INTERNAL RTL8366RB_PORT_CPU + +#define RTL8366RB_VLAN_VID_MASK 0xfff +#define RTL8366RB_VLAN_PRIORITY_SHIFT 12 +#define RTL8366RB_VLAN_PRIORITY_MASK 0x7 +#define RTL8366RB_VLAN_UNTAG_SHIFT 8 +#define RTL8366RB_VLAN_UNTAG_MASK 0xff +#define RTL8366RB_VLAN_MEMBER_MASK 0xff +#define RTL8366RB_VLAN_FID_MASK 0x7 + + +/* Port ingress bandwidth control */ +#define RTL8366RB_IB_BASE 0x0200 +#define RTL8366RB_IB_REG(pnum) (RTL8366RB_IB_BASE + pnum) +#define RTL8366RB_IB_BDTH_MASK 0x3fff +#define RTL8366RB_IB_PREIFG_OFFSET 14 +#define RTL8366RB_IB_PREIFG_MASK (1 << RTL8366RB_IB_PREIFG_OFFSET) + +/* Port egress bandwidth control */ +#define RTL8366RB_EB_BASE 0x02d1 +#define RTL8366RB_EB_REG(pnum) (RTL8366RB_EB_BASE + pnum) +#define RTL8366RB_EB_BDTH_MASK 0x3fff +#define RTL8366RB_EB_PREIFG_REG 0x02f8 +#define RTL8366RB_EB_PREIFG_OFFSET 9 +#define RTL8366RB_EB_PREIFG_MASK (1 << RTL8366RB_EB_PREIFG_OFFSET) + +#define RTL8366RB_BDTH_SW_MAX 1048512 +#define RTL8366RB_BDTH_UNIT 64 +#define RTL8366RB_BDTH_REG_DEFAULT 16383 + +/* QOS */ +#define RTL8366RB_QOS_BIT 15 +#define RTL8366RB_QOS_MASK (1 << RTL8366RB_QOS_BIT) +/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */ +#define RTL8366RB_QOS_DEFAULT_PREIFG 1 + +/* Interrupt handling */ +#define RTL8366RB_INTERRUPT_CONTROL_REG 0x0440 +#define RTL8366RB_INTERRUPT_POLARITY BIT(0) +#define RTL8366RB_INTERRUPT_MASK_REG 0x0441 +#define RTL8366RB_INTERRUPT_LINK_CHGALL GENMASK(11, 0) +#define RTL8366RB_INTERRUPT_ACLEXCEED BIT(8) +#define RTL8366RB_INTERRUPT_STORMEXCEED BIT(9) +#define RTL8366RB_INTERRUPT_P4_FIBER BIT(12) +#define RTL8366RB_INTERRUPT_P4_UTP BIT(13) +#define RTL8366RB_INTERRUPT_VALID (RTL8366RB_INTERRUPT_LINK_CHGALL | \ + RTL8366RB_INTERRUPT_ACLEXCEED | \ + RTL8366RB_INTERRUPT_STORMEXCEED | \ + RTL8366RB_INTERRUPT_P4_FIBER | \ + RTL8366RB_INTERRUPT_P4_UTP) +#define RTL8366RB_INTERRUPT_STATUS_REG 0x0442 + +/* bits 0..5 enable force when cleared */ +#define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11 + +#define RTL8366RB_GREEN_FEATURE_REG 0x0F51 +#define RTL8366RB_GREEN_FEATURE_MSK 0x0007 +#define RTL8366RB_GREEN_FEATURE_TX BIT(0) +#define RTL8366RB_GREEN_FEATURE_RX BIT(2) + +static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = { + { 0, 0, 4, "IfInOctets" }, + { 0, 4, 4, "EtherStatsOctets" }, + { 0, 8, 2, "EtherStatsUnderSizePkts" }, + { 0, 10, 2, "EtherFragments" }, + { 0, 12, 2, "EtherStatsPkts64Octets" }, + { 0, 14, 2, "EtherStatsPkts65to127Octets" }, + { 0, 16, 2, "EtherStatsPkts128to255Octets" }, + { 0, 18, 2, "EtherStatsPkts256to511Octets" }, + { 0, 20, 2, "EtherStatsPkts512to1023Octets" }, + { 0, 22, 2, "EtherStatsPkts1024to1518Octets" }, + { 0, 24, 2, "EtherOversizeStats" }, + { 0, 26, 2, "EtherStatsJabbers" }, + { 0, 28, 2, "IfInUcastPkts" }, + { 0, 30, 2, "EtherStatsMulticastPkts" }, + { 0, 32, 2, "EtherStatsBroadcastPkts" }, + { 0, 34, 2, "EtherStatsDropEvents" }, + { 0, 36, 2, "Dot3StatsFCSErrors" }, + { 0, 38, 2, "Dot3StatsSymbolErrors" }, + { 0, 40, 2, "Dot3InPauseFrames" }, + { 0, 42, 2, "Dot3ControlInUnknownOpcodes" }, + { 0, 44, 4, "IfOutOctets" }, + { 0, 48, 2, "Dot3StatsSingleCollisionFrames" }, + { 0, 50, 2, "Dot3StatMultipleCollisionFrames" }, + { 0, 52, 2, "Dot3sDeferredTransmissions" }, + { 0, 54, 2, "Dot3StatsLateCollisions" }, + { 0, 56, 2, "EtherStatsCollisions" }, + { 0, 58, 2, "Dot3StatsExcessiveCollisions" }, + { 0, 60, 2, "Dot3OutPauseFrames" }, + { 0, 62, 2, "Dot1dBasePortDelayExceededDiscards" }, + { 0, 64, 2, "Dot1dTpPortInDiscards" }, + { 0, 66, 2, "IfOutUcastPkts" }, + { 0, 68, 2, "IfOutMulticastPkts" }, + { 0, 70, 2, "IfOutBroadcastPkts" }, +}; + +static int rtl8366rb_get_mib_counter(struct realtek_smi *smi, + int port, + struct rtl8366_mib_counter *mib, + u64 *mibvalue) +{ + u32 addr, val; + int ret; + int i; + + addr = RTL8366RB_MIB_COUNTER_BASE + + RTL8366RB_MIB_COUNTER_PORT_OFFSET * (port) + + mib->offset; + + /* + * Writing access counter address first + * then ASIC will prepare 64bits counter wait for being retrived + */ + ret = regmap_write(smi->map, addr, 0); /* Write whatever */ + if (ret) + return ret; + + /* Read MIB control register */ + ret = regmap_read(smi->map, RTL8366RB_MIB_CTRL_REG, &val); + if (ret) + return -EIO; + + if (val & RTL8366RB_MIB_CTRL_BUSY_MASK) + return -EBUSY; + + if (val & RTL8366RB_MIB_CTRL_RESET_MASK) + return -EIO; + + /* + * Read each individual MIB 16 bits at the time + */ + *mibvalue = 0; + for (i = mib->length; i > 0; i--) { + ret = regmap_read(smi->map, addr + (i - 1), &val); + if (ret) + return ret; + *mibvalue = (*mibvalue << 16) | (val & 0xFFFF); + } + return 0; +} + +static u32 rtl8366rb_get_irqmask(struct irq_data *d) +{ + int line = irqd_to_hwirq(d); + u32 val; + + /* + * For line interrupts we combine link down in bits + * 6..11 with link up in bits 0..5 into one interrupt. + */ + if (line < 12) + val = BIT(line) | BIT(line+6); + else + val = BIT(line); + return val; +} + +static void rtl8366rb_mask_irq(struct irq_data *d) +{ + struct realtek_smi *smi = irq_data_get_irq_chip_data(d); + int ret; + + ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG, + rtl8366rb_get_irqmask(d), 0); + if (ret) + dev_err(smi->dev, "could not mask IRQ\n"); +} + +static void rtl8366rb_unmask_irq(struct irq_data *d) +{ + struct realtek_smi *smi = irq_data_get_irq_chip_data(d); + int ret; + + ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_MASK_REG, + rtl8366rb_get_irqmask(d), + rtl8366rb_get_irqmask(d)); + if (ret) + dev_err(smi->dev, "could not unmask IRQ\n"); +} + +static irqreturn_t rtl8366rb_irq(int irq, void *data) +{ + struct realtek_smi *smi = data; + u32 stat; + int ret; + + /* This clears the IRQ status register */ + ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG, + &stat); + if (ret) { + dev_err(smi->dev, "can't read interrupt status\n"); + return IRQ_NONE; + } + stat &= RTL8366RB_INTERRUPT_VALID; + if (!stat) + return IRQ_NONE; + while (stat) { + int line = __ffs(stat); + int child_irq; + + stat &= ~BIT(line); + /* + * For line interrupts we combine link down in bits + * 6..11 with link up in bits 0..5 into one interrupt. + */ + if (line < 12 && line > 5) + line -= 5; + child_irq = irq_find_mapping(smi->irqdomain, line); + handle_nested_irq(child_irq); + } + return IRQ_HANDLED; +} + +static struct irq_chip rtl8366rb_irq_chip = { + .name = "RTL8366RB", + .irq_mask = rtl8366rb_mask_irq, + .irq_unmask = rtl8366rb_unmask_irq, +}; + +static int rtl8366rb_irq_map(struct irq_domain *domain, unsigned int irq, + irq_hw_number_t hwirq) +{ + irq_set_chip_data(irq, domain->host_data); + irq_set_chip_and_handler(irq, &rtl8366rb_irq_chip, handle_simple_irq); + irq_set_nested_thread(irq, 1); + irq_set_noprobe(irq); + + return 0; +} + +static void rtl8366rb_irq_unmap(struct irq_domain *d, unsigned int irq) +{ + irq_set_nested_thread(irq, 0); + irq_set_chip_and_handler(irq, NULL, NULL); + irq_set_chip_data(irq, NULL); +} + +static const struct irq_domain_ops rtl8366rb_irqdomain_ops = { + .map = rtl8366rb_irq_map, + .unmap = rtl8366rb_irq_unmap, + .xlate = irq_domain_xlate_onecell, +}; + +static int rtl8366rb_setup_cascaded_irq(struct realtek_smi *smi) +{ + struct device_node *intc = of_get_child_by_name(smi->dev->of_node, + "interrupt-controller"); + unsigned long irq_trig; + int irq; + int ret; + u32 val; + int i; + + if (!intc) { + dev_err(smi->dev, "missing child interrupt-controller node\n"); + return -EINVAL; + } + /* RB8366RB IRQs cascade off this one */ + irq = of_irq_get(intc, 0); + if (irq <= 0) { + dev_err(smi->dev, "failed to get parent IRQ\n"); + return irq ?: -EINVAL; + } + + /* This clears the IRQ status register */ + ret = regmap_read(smi->map, RTL8366RB_INTERRUPT_STATUS_REG, + &val); + if (ret) { + dev_err(smi->dev, "can't read interrupt status\n"); + return ret; + } + + /* Fetch IRQ edge information from the descriptor */ + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + switch (irq_trig) { + case IRQF_TRIGGER_RISING: + case IRQF_TRIGGER_HIGH: + dev_info(smi->dev, "active high/rising IRQ\n"); + val = 0; + break; + case IRQF_TRIGGER_FALLING: + case IRQF_TRIGGER_LOW: + dev_info(smi->dev, "active low/falling IRQ\n"); + val = RTL8366RB_INTERRUPT_POLARITY; + break; + }; + ret = regmap_update_bits(smi->map, RTL8366RB_INTERRUPT_CONTROL_REG, + RTL8366RB_INTERRUPT_POLARITY, + val); + if (ret) { + dev_err(smi->dev, "could not configure IRQ polarity\n"); + return ret; + } + + ret = devm_request_threaded_irq(smi->dev, irq, NULL, + rtl8366rb_irq, IRQF_ONESHOT, + "RTL8366RB", smi); + if (ret) { + dev_err(smi->dev, "unable to request irq: %d\n", ret); + return ret; + } + smi->irqdomain = irq_domain_add_linear(intc, smi->num_ports, + &rtl8366rb_irqdomain_ops, smi); + if (!smi->irqdomain) { + dev_err(smi->dev, "failed to create IRQ domain\n"); + return -EINVAL; + } + for (i = 0; i < smi->num_ports; i++) + irq_set_parent(irq_create_mapping(smi->irqdomain, i), irq); + + return 0; +} + +/* + * This jam table activates "green ethernet", which means low power mode + * and is claimed to detect the cable length and not use more power than + * necessary, and the ports should enter power saving mode 10 seconds after + * a cable is disconnected. + */ +static const u32 rtl8366rb_green_jam[][2] = { + {0xBE78, 0x323C}, + {0xBE77, 0x5000}, + {0xBE2E, 0x7BA7}, + {0xBE59, 0x3459}, + {0xBE5A, 0x745A}, + {0xBE5B, 0x785C}, + {0xBE5C, 0x785C}, + {0xBE6E, 0xE120}, + {0xBE79, 0x323C}, +}; + +static int rtl8366rb_setup(struct dsa_switch *ds) +{ + struct realtek_smi *smi = ds->priv; + u32 chip_id = 0; + u32 chip_ver = 0; + u32 val; + int ret; + int i; + + ret = regmap_read(smi->map, RTL8366RB_CHIP_ID_REG, &chip_id); + if (ret) { + dev_err(smi->dev, "unable to read chip id\n"); + return ret; + } + + switch (chip_id) { + case RTL8366RB_CHIP_ID_8366: + break; + default: + dev_err(smi->dev, "unknown chip id (%04x)\n", chip_id); + return -ENODEV; + } + + ret = regmap_read(smi->map, RTL8366RB_CHIP_VERSION_CTRL_REG, + &chip_ver); + if (ret) { + dev_err(smi->dev, "unable to read chip version\n"); + return ret; + } + + dev_info(smi->dev, "RTL%04x ver %u chip found\n", + chip_id, chip_ver & RTL8366RB_CHIP_VERSION_MASK); + + /* Set up the "green ethernet" feature */ + i = 0; + while (i < ARRAY_SIZE(rtl8366rb_green_jam)) { + ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_BUSY_REG, + &val); + if (ret) + return ret; + if (!(val & RTL8366RB_PHY_INT_BUSY)) { + ret = regmap_write(smi->map, + RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_WRITE); + if (ret) + return ret; + ret = regmap_write(smi->map, + rtl8366rb_green_jam[i][0], + rtl8366rb_green_jam[i][1]); + if (ret) + return ret; + i++; + } + } + ret = regmap_write(smi->map, + RTL8366RB_GREEN_FEATURE_REG, + (chip_ver == 1) ? 0x0007 : 0x0003); + if (ret) + return ret; + /* + * The RTL8366RB PHY driver will set up the PHY registers for power + * saving mode. + */ + + /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */ + ret = regmap_update_bits(smi->map, RTL8366RB_MAC_FORCE_CTRL_REG, + BIT(5), 0); + if (ret) + return ret; + + ret = regmap_update_bits(smi->map, RTL8366RB_PAACR2, + 0xFF00U, + RTL8366RB_PAACR_CPU_PORT << 8); + if (ret) + return ret; + + ret = regmap_update_bits(smi->map, RTL8366RB_MAC_FORCE_CTRL_REG, + BIT(5), BIT(5)); + if (ret) + return ret; + + /* Vendor driver sets 0x240 in registers 0xc and 0xd (undocumented) */ + ret = regmap_write(smi->map, 0x0c, 0x240); + if (ret) + return ret; + ret = regmap_write(smi->map, 0x0d, 0x240); + if (ret) + return ret; + + /* + * FIXME: this disables inserting the custom tag, enable this when we + * support the custom tag in net/dsa. + */ + ret = regmap_update_bits(smi->map, RTL8368RB_CPU_CTRL_REG, + 0xFFFF, BIT(smi->cpu_port)); + + /* Make sure we default-enable the fixed CPU port */ + ret = regmap_update_bits(smi->map, RTL8366RB_PECR, + BIT(smi->cpu_port), + 0); + + /* set maximum packet length to 1536 bytes */ + ret = regmap_update_bits(smi->map, RTL8366RB_SGCR, + RTL8366RB_SGCR_MAX_LENGTH_MASK, + RTL8366RB_SGCR_MAX_LENGTH_1536); + if (ret) + return ret; + + /* enable learning for all ports */ + ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0); + if (ret) + return ret; + + /* enable auto ageing for all ports */ + ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0); + if (ret) + return ret; + + /* + * discard VLAN tagged packets if the port is not a member of + * the VLAN with which the packets is associated. + */ + ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG, + RTL8366RB_PORT_ALL); + if (ret) + return ret; + + /* don't drop packets whose DA has not been learned */ + ret = regmap_update_bits(smi->map, RTL8366RB_SSCR2, + RTL8366RB_SSCR2_DROP_UNKNOWN_DA, 0); + if (ret) + return ret; + + /* Issues reset_vlan(), enable_vlan(true) */ + ret = rtl8366_init_vlan(smi); + if (ret) + return ret; + + ret = rtl8366rb_setup_cascaded_irq(smi); + if (ret) + dev_info(smi->dev, "no interrupt support\n"); + + return 0; +} + +static int rtl8366rb_set_addr(struct dsa_switch *ds, u8 *addr) +{ + struct realtek_smi *smi = ds->priv; + u16 val; + int ret; + + dev_info(smi->dev, "set MAC: %02X:%02X:%02X:%02X:%02X:%02X\n", + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + val = addr[0] << 8 | addr[1]; + ret = regmap_write(smi->map, RTL8366RB_SMAR0, val); + if (ret) + return ret; + val = addr[2] << 8 | addr[3]; + ret = regmap_write(smi->map, RTL8366RB_SMAR1, val); + if (ret) + return ret; + val = addr[4] << 8 | addr[5]; + ret = regmap_write(smi->map, RTL8366RB_SMAR2, val); + if (ret) + return ret; + + return 0; +} + +static int rtl8366rb_phy_read(struct dsa_switch *ds, int phy, int regnum) +{ + struct realtek_smi *smi = ds->priv; + u32 val; + u32 reg; + int ret; + + if (phy > RTL8366RB_PHY_NO_MAX) + return -EINVAL; + + ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_READ); + if (ret) + return ret; + + reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; + + ret = regmap_write(smi->map, reg, 0); + if (ret) { + dev_err(smi->dev, + "failed to write PHY%d reg %04x @ %04x, ret %d\n", + phy, regnum, reg, ret); + return ret; + } + + ret = regmap_read(smi->map, RTL8366RB_PHY_ACCESS_DATA_REG, &val); + if (ret) + return ret; + + dev_dbg(smi->dev, "read PHY%d register 0x%04x @ %08x, val <- %04x\n", + phy, regnum, reg, val); + + return val; +} + +static int rtl8366rb_phy_write(struct dsa_switch *ds, int phy, int regnum, + u16 val) +{ + struct realtek_smi *smi = ds->priv; + u32 reg; + int ret; + + if (phy > RTL8366RB_PHY_NO_MAX) + return -EINVAL; + + ret = regmap_write(smi->map, RTL8366RB_PHY_ACCESS_CTRL_REG, + RTL8366RB_PHY_CTRL_WRITE); + if (ret) + return ret; + + reg = 0x8000 | (1 << (phy + RTL8366RB_PHY_NO_OFFSET)) | regnum; + + dev_dbg(smi->dev, "write PHY%d register 0x%04x @ %04x, val -> %04x\n", + phy, regnum, reg, val); + + ret = regmap_write(smi->map, reg, val); + if (ret) + return ret; + + return 0; +} + +static enum dsa_tag_protocol rtl8366_get_tag_protocol(struct dsa_switch *ds) +{ + /* FIXME: implement the right tagging protocol */ + return DSA_TAG_PROTO_NONE; +} + +static void rtl8366rb_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct realtek_smi *smi = ds->priv; + + if (port == smi->cpu_port) { + dev_info(smi->dev, "adjust link on CPU port\n"); + } +} + +static int +rtl8366rb_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct realtek_smi *smi = ds->priv; + + dev_info(smi->dev, "enable port %d\n", port); + return regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), + 0); + +} + +static void +rtl8366rb_port_disable(struct dsa_switch *ds, int port, + struct phy_device *phy) +{ + struct realtek_smi *smi = ds->priv; + + dev_info(smi->dev, "disable port %d\n", port); + regmap_update_bits(smi->map, RTL8366RB_PECR, BIT(port), + BIT(port)); +} + +static int rtl8366rb_get_vlan_4k(struct realtek_smi *smi, u32 vid, + struct rtl8366_vlan_4k *vlan4k) +{ + u32 data[3]; + int ret; + int i; + + memset(vlan4k, '\0', sizeof(struct rtl8366_vlan_4k)); + + if (vid >= RTL8366RB_NUM_VIDS) + return -EINVAL; + + /* write VID */ + ret = regmap_write(smi->map, RTL8366RB_VLAN_TABLE_WRITE_BASE, + vid & RTL8366RB_VLAN_VID_MASK); + if (ret) + return ret; + + /* write table access control word */ + ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, + RTL8366RB_TABLE_VLAN_READ_CTRL); + if (ret) + return ret; + + for (i = 0; i < 3; i++) { + ret = regmap_read(smi->map, + RTL8366RB_VLAN_TABLE_READ_BASE + i, + &data[i]); + if (ret) + return ret; + } + + vlan4k->vid = vid; + vlan4k->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & + RTL8366RB_VLAN_UNTAG_MASK; + vlan4k->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; + vlan4k->fid = data[2] & RTL8366RB_VLAN_FID_MASK; + + return 0; +} + +static int rtl8366rb_set_vlan_4k(struct realtek_smi *smi, + const struct rtl8366_vlan_4k *vlan4k) +{ + u32 data[3]; + int ret; + int i; + + if (vlan4k->vid >= RTL8366RB_NUM_VIDS || + vlan4k->member > RTL8366RB_VLAN_MEMBER_MASK || + vlan4k->untag > RTL8366RB_VLAN_UNTAG_MASK || + vlan4k->fid > RTL8366RB_FIDMAX) + return -EINVAL; + + data[0] = vlan4k->vid & RTL8366RB_VLAN_VID_MASK; + data[1] = (vlan4k->member & RTL8366RB_VLAN_MEMBER_MASK) | + ((vlan4k->untag & RTL8366RB_VLAN_UNTAG_MASK) << + RTL8366RB_VLAN_UNTAG_SHIFT); + data[2] = vlan4k->fid & RTL8366RB_VLAN_FID_MASK; + + for (i = 0; i < 3; i++) { + ret = regmap_write(smi->map, + RTL8366RB_VLAN_TABLE_WRITE_BASE + i, + data[i]); + if (ret) + return ret; + } + + /* write table access control word */ + ret = regmap_write(smi->map, RTL8366RB_TABLE_ACCESS_CTRL_REG, + RTL8366RB_TABLE_VLAN_WRITE_CTRL); + + return ret; +} + +static int rtl8366rb_get_vlan_mc(struct realtek_smi *smi, u32 index, + struct rtl8366_vlan_mc *vlanmc) +{ + u32 data[3]; + int ret; + int i; + + memset(vlanmc, '\0', sizeof(struct rtl8366_vlan_mc)); + + if (index >= RTL8366RB_NUM_VLANS) + return -EINVAL; + + for (i = 0; i < 3; i++) { + ret = regmap_read(smi->map, + RTL8366RB_VLAN_MC_BASE(index) + i, + &data[i]); + if (ret) + return ret; + } + + vlanmc->vid = data[0] & RTL8366RB_VLAN_VID_MASK; + vlanmc->priority = (data[0] >> RTL8366RB_VLAN_PRIORITY_SHIFT) & + RTL8366RB_VLAN_PRIORITY_MASK; + vlanmc->untag = (data[1] >> RTL8366RB_VLAN_UNTAG_SHIFT) & + RTL8366RB_VLAN_UNTAG_MASK; + vlanmc->member = data[1] & RTL8366RB_VLAN_MEMBER_MASK; + vlanmc->fid = data[2] & RTL8366RB_VLAN_FID_MASK; + + return 0; +} + +static int rtl8366rb_set_vlan_mc(struct realtek_smi *smi, u32 index, + const struct rtl8366_vlan_mc *vlanmc) +{ + u32 data[3]; + int ret; + int i; + + if (index >= RTL8366RB_NUM_VLANS || + vlanmc->vid >= RTL8366RB_NUM_VIDS || + vlanmc->priority > RTL8366RB_PRIORITYMAX || + vlanmc->member > RTL8366RB_VLAN_MEMBER_MASK || + vlanmc->untag > RTL8366RB_VLAN_UNTAG_MASK || + vlanmc->fid > RTL8366RB_FIDMAX) + return -EINVAL; + + data[0] = (vlanmc->vid & RTL8366RB_VLAN_VID_MASK) | + ((vlanmc->priority & RTL8366RB_VLAN_PRIORITY_MASK) << + RTL8366RB_VLAN_PRIORITY_SHIFT); + data[1] = (vlanmc->member & RTL8366RB_VLAN_MEMBER_MASK) | + ((vlanmc->untag & RTL8366RB_VLAN_UNTAG_MASK) << + RTL8366RB_VLAN_UNTAG_SHIFT); + data[2] = vlanmc->fid & RTL8366RB_VLAN_FID_MASK; + + for (i = 0; i < 3; i++) { + ret = regmap_write(smi->map, + RTL8366RB_VLAN_MC_BASE(index) + i, + data[i]); + if (ret) + return ret; + } + + return 0; +} + +static int rtl8366rb_get_mc_index(struct realtek_smi *smi, int port, int *val) +{ + u32 data; + int ret; + + if (port >= smi->num_ports) + return -EINVAL; + + ret = regmap_read(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), + &data); + if (ret) + return ret; + + *val = (data >> RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)) & + RTL8366RB_PORT_VLAN_CTRL_MASK; + + return 0; + +} + +static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index) +{ + if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS) + return -EINVAL; + + return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port), + RTL8366RB_PORT_VLAN_CTRL_MASK << + RTL8366RB_PORT_VLAN_CTRL_SHIFT(port), + (index & RTL8366RB_PORT_VLAN_CTRL_MASK) << + RTL8366RB_PORT_VLAN_CTRL_SHIFT(port)); +} + +static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned vlan) +{ + unsigned max = RTL8366RB_NUM_VLANS; + + if (smi->vlan4k_enabled) + max = RTL8366RB_NUM_VIDS - 1; + + if (vlan == 0 || vlan >= max) + return 0; + + return 1; +} + +static int rtl8366rb_enable_vlan(struct realtek_smi *smi, bool enable) +{ + return regmap_update_bits(smi->map, RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN, + enable ? RTL8366RB_SGCR_EN_VLAN : 0); +} + +static int rtl8366rb_enable_vlan4k(struct realtek_smi *smi, bool enable) +{ + return regmap_update_bits(smi->map, RTL8366RB_SGCR, + RTL8366RB_SGCR_EN_VLAN_4KTB, + enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0); +} + +static int rtl8366rb_reset_chip(struct realtek_smi *smi) +{ + int timeout = 10; + u32 val; + int ret; + + realtek_smi_write_reg_noack(smi, RTL8366RB_RESET_CTRL_REG, + RTL8366RB_CHIP_CTRL_RESET_HW); + do { + msleep(1); + ret = regmap_read(smi->map, RTL8366RB_RESET_CTRL_REG, &val); + if (ret) + return ret; + + if (!(val & RTL8366RB_CHIP_CTRL_RESET_HW)) + break; + } while (--timeout); + + if (!timeout) { + dev_err(smi->dev, "timeout waiting for the switch to reset\n"); + return -EIO; + } + + return 0; +} + +static int rtl8366rb_detect(struct realtek_smi *smi) +{ + struct device *dev = smi->dev; + int ret; + u32 val; + + /* Detect device */ + ret = regmap_read(smi->map, 0x5c, &val); + if (ret) { + dev_err(dev, "can't get chip ID (%d)\n", ret); + return ret; + } + + switch(val) { + case 0x6027: + dev_info(dev, "found an RTL8366S switch\n"); + dev_err(dev, "this switch is not yet supported, submit patches!\n"); + return -ENODEV; + break; + case 0x5937: + dev_info(dev, "found an RTL8366RB switch\n"); + smi->cpu_port = RTL8366RB_PORT_NUM_CPU; + smi->num_ports = RTL8366RB_NUM_PORTS; + smi->num_vlan_mc = RTL8366RB_NUM_VLANS; + smi->mib_counters = rtl8366rb_mib_counters; + smi->num_mib_counters = ARRAY_SIZE(rtl8366rb_mib_counters); + break; + default: + dev_info(dev, "found an Unknown Realtek switch (id=0x%04x)\n", + val); + break; + } + + ret = rtl8366rb_reset_chip(smi); + if (ret) + return ret; + + return 0; +} + +static const struct dsa_switch_ops rtl8366rb_switch_ops = { + .get_tag_protocol = rtl8366_get_tag_protocol, + .setup = rtl8366rb_setup, + .set_addr = rtl8366rb_set_addr, + .adjust_link = rtl8366rb_adjust_link, + .get_strings = rtl8366_get_strings, + .get_ethtool_stats = rtl8366_get_ethtool_stats, + .get_sset_count = rtl8366_get_sset_count, + .port_vlan_filtering = rtl8366_vlan_filtering, + .port_vlan_prepare = rtl8366_vlan_prepare, + .port_vlan_add = rtl8366_vlan_add, + .port_vlan_del = rtl8366_vlan_del, + .phy_read = rtl8366rb_phy_read, + .phy_write = rtl8366rb_phy_write, + .port_enable = rtl8366rb_port_enable, + .port_disable = rtl8366rb_port_disable, +}; + +static const struct realtek_smi_ops rtl8366rb_smi_ops = { + .detect = rtl8366rb_detect, + .get_vlan_mc = rtl8366rb_get_vlan_mc, + .set_vlan_mc = rtl8366rb_set_vlan_mc, + .get_vlan_4k = rtl8366rb_get_vlan_4k, + .set_vlan_4k = rtl8366rb_set_vlan_4k, + .get_mc_index = rtl8366rb_get_mc_index, + .set_mc_index = rtl8366rb_set_mc_index, + .get_mib_counter = rtl8366rb_get_mib_counter, + .is_vlan_valid = rtl8366rb_is_vlan_valid, + .enable_vlan = rtl8366rb_enable_vlan, + .enable_vlan4k = rtl8366rb_enable_vlan4k, +}; + +const struct realtek_smi_variant rtl8366rb_variant = { + .ds_ops = &rtl8366rb_switch_ops, + .ops = &rtl8366rb_smi_ops, + .clk_delay = 10, + .cmd_read = 0xa9, + .cmd_write = 0xa8, +}; +EXPORT_SYMBOL_GPL(rtl8366rb_variant);