@@ -293,7 +293,14 @@ ipa_endpoint_init_ctrl(struct ipa_endpoint *endpoint, bool suspend_delay)
u32 mask;
u32 val;
- /* assert(ipa->version == IPA_VERSION_3_5_1 */
+ /* Suspend is not supported for IPA v4.0+. Delay doesn't work
+ * correctly on IPA v4.2.
+ *
+ * if (endpoint->toward_ipa)
+ * assert(ipa->version != IPA_VERSION_4.2);
+ * else
+ * assert(ipa->version == IPA_VERSION_3_5_1);
+ */
mask = endpoint->toward_ipa ? ENDP_DELAY_FMASK : ENDP_SUSPEND_FMASK;
val = ioread32(ipa->reg_virt + offset);
@@ -307,13 +314,31 @@ ipa_endpoint_init_ctrl(struct ipa_endpoint *endpoint, bool suspend_delay)
return state;
}
+/* We currently don't care what the previous state was for delay mode */
+static void
+ipa_endpoint_program_delay(struct ipa_endpoint *endpoint, bool enable)
+{
+ /* assert(endpoint->toward_ipa); */
+
+ (void)ipa_endpoint_init_ctrl(endpoint, enable);
+}
+
+/* Returns previous suspend state (true means it was enabled) */
+static bool
+ipa_endpoint_program_suspend(struct ipa_endpoint *endpoint, bool enable)
+{
+ /* assert(!endpoint->toward_ipa); */
+
+ return ipa_endpoint_init_ctrl(endpoint, enable);
+}
+
/* Enable or disable delay or suspend mode on all modem endpoints */
void ipa_endpoint_modem_pause_all(struct ipa *ipa, bool enable)
{
bool support_suspend;
u32 endpoint_id;
- /* DELAY mode doesn't work right on IPA v4.2 */
+ /* DELAY mode doesn't work correctly on IPA v4.2 */
if (ipa->version == IPA_VERSION_4_2)
return;
@@ -327,8 +352,10 @@ void ipa_endpoint_modem_pause_all(struct ipa *ipa, bool enable)
continue;
/* Set TX delay mode, or for IPA v3.5.1 RX suspend mode */
- if (endpoint->toward_ipa || support_suspend)
- (void)ipa_endpoint_init_ctrl(endpoint, enable);
+ if (endpoint->toward_ipa)
+ ipa_endpoint_program_delay(endpoint, enable);
+ else if (support_suspend)
+ (void)ipa_endpoint_program_suspend(endpoint, enable);
}
}
@@ -1135,8 +1162,8 @@ static int ipa_endpoint_reset_rx_aggr(struct ipa_endpoint *endpoint)
{
struct device *dev = &endpoint->ipa->pdev->dev;
struct ipa *ipa = endpoint->ipa;
- bool endpoint_suspended = false;
struct gsi *gsi = &ipa->gsi;
+ bool suspended = false;
dma_addr_t addr;
bool db_enable;
u32 retries;
@@ -1166,7 +1193,7 @@ static int ipa_endpoint_reset_rx_aggr(struct ipa_endpoint *endpoint)
/* Make sure the channel isn't suspended */
if (endpoint->ipa->version == IPA_VERSION_3_5_1)
- endpoint_suspended = ipa_endpoint_init_ctrl(endpoint, false);
+ suspended = ipa_endpoint_program_suspend(endpoint, false);
/* Start channel and do a 1 byte read */
ret = gsi_channel_start(gsi, endpoint->channel_id);
@@ -1211,8 +1238,8 @@ static int ipa_endpoint_reset_rx_aggr(struct ipa_endpoint *endpoint)
err_endpoint_stop:
ipa_endpoint_stop(endpoint);
out_suspend_again:
- if (endpoint_suspended)
- (void)ipa_endpoint_init_ctrl(endpoint, true);
+ if (suspended)
+ (void)ipa_endpoint_program_suspend(endpoint, true);
dma_unmap_single(dev, addr, len, DMA_FROM_DEVICE);
out_kfree:
kfree(virt);
@@ -1313,30 +1340,18 @@ int ipa_endpoint_stop(struct ipa_endpoint *endpoint)
static void ipa_endpoint_program(struct ipa_endpoint *endpoint)
{
- struct device *dev = &endpoint->ipa->pdev->dev;
- int ret;
-
if (endpoint->toward_ipa) {
bool delay_mode = endpoint->data->tx.delay;
- /* Endpoint is expected to not be in delay mode */
- if (ipa_endpoint_init_ctrl(endpoint, delay_mode))
- dev_warn(dev,
- "TX endpoint %u was %sin delay mode\n",
- endpoint->endpoint_id,
- delay_mode ? "already " : "");
+ if (endpoint->ipa->version != IPA_VERSION_4_2)
+ ipa_endpoint_program_delay(endpoint, delay_mode);
ipa_endpoint_init_hdr_ext(endpoint);
ipa_endpoint_init_aggr(endpoint);
ipa_endpoint_init_deaggr(endpoint);
ipa_endpoint_init_seq(endpoint);
} else {
- /* Endpoint is expected to not be suspended */
- if (endpoint->ipa->version == IPA_VERSION_3_5_1) {
- if (ipa_endpoint_init_ctrl(endpoint, false))
- dev_warn(dev,
- "RX endpoint %u was suspended\n",
- endpoint->endpoint_id);
- }
+ if (endpoint->ipa->version == IPA_VERSION_3_5_1)
+ (void)ipa_endpoint_program_suspend(endpoint, false);
ipa_endpoint_init_hdr_ext(endpoint);
ipa_endpoint_init_aggr(endpoint);
}
@@ -1448,7 +1463,7 @@ void ipa_endpoint_suspend_one(struct ipa_endpoint *endpoint)
* aggregation frame, then simulating the arrival of such
* an interrupt.
*/
- WARN_ON(ipa_endpoint_init_ctrl(endpoint, true));
+ (void)ipa_endpoint_program_suspend(endpoint, true);
ipa_endpoint_suspend_aggr(endpoint);
}
@@ -1471,7 +1486,7 @@ void ipa_endpoint_resume_one(struct ipa_endpoint *endpoint)
/* IPA v3.5.1 doesn't use channel start for resume */
start_channel = endpoint->ipa->version != IPA_VERSION_3_5_1;
if (!endpoint->toward_ipa && !start_channel)
- WARN_ON(!ipa_endpoint_init_ctrl(endpoint, false));
+ (void)ipa_endpoint_program_suspend(endpoint, false);
ret = gsi_channel_resume(gsi, endpoint->channel_id, start_channel);
if (ret)
Create a new helper function that encapsulates enabling or disabling suspend on an RX endpoint. It returns the previous state of the endpoint (true means suspend mode was enabled). Create another function that handles enabling or disabling delay mode on a TX endpoint. Delay mode does not work correctly on IPA version 4.2, so we don't currently use it (and shouldn't). We only set delay mode in one case, and although we don't expect an endpoint to already be in delay mode, it doesn't really matter if it was. So the delay function doesn't return a value. Stop issuing warnings if the previous suspend or delay mode state differs from what is expected. Signed-off-by: Alex Elder <elder@linaro.org> --- drivers/net/ipa/ipa_endpoint.c | 67 +++++++++++++++++++++------------- 1 file changed, 41 insertions(+), 26 deletions(-)