diff mbox series

[net-next,5/5,v3] net: dsa: rtl8366: Use top VLANs for default

Message ID 20200705231550.77946-6-linus.walleij@linaro.org
State Superseded
Headers show
Series RTL8366RB DSA tagging and fixes | expand

Commit Message

Linus Walleij July 5, 2020, 11:15 p.m. UTC 
The RTL8366 DSA switches will not work unless we set
up a default VLAN for each port. We are currently using
e.g. VLAN 1..6 for a 5-port switch as default VLANs.

This is not very helpful for users, move it to allocate
the top VLANs for default instead, for example on
RTL8366RB there are 16 VLANs so instead of using
VLAN 1..6 as default use VLAN 10..15 so VLAN 1
thru VLAN 9 is available for users.

Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
ChangeLog v2->v3:
- Collect Andrew's reviewed-by.
ChangeLog v1->v2:
- Rebase on v5.8-rc1.
---
 drivers/net/dsa/rtl8366.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
2.26.2
diff mbox series

Patch

diff --git a/drivers/net/dsa/rtl8366.c b/drivers/net/dsa/rtl8366.c
index a000d458d121..06adcf68ff8d 100644
--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -260,8 +260,8 @@  static int rtl8366_set_default_vlan_and_pvid(struct realtek_smi *smi,
 	u16 vid;
 	int ret;
 
-	/* This is the reserved default VLAN for this port */
-	vid = port + 1;
+	/* Use the top VLANs for per-port default VLAN */
+	vid = smi->num_vlan_mc - smi->num_ports + port;
 
 	if (port == smi->cpu_port)
 		/* For the CPU port, make all ports members of this