@@ -14,28 +14,11 @@
#include <linux/workqueue.h>
#include <linux/module.h>
#include <linux/if_bridge.h>
+#include <linux/dsa/loop.h>
#include <net/dsa.h>
#include "dsa_loop.h"
-struct dsa_loop_vlan {
- u16 members;
- u16 untagged;
-};
-
-struct dsa_loop_mib_entry {
- char name[ETH_GSTRING_LEN];
- unsigned long val;
-};
-
-enum dsa_loop_mib_counters {
- DSA_LOOP_PHY_READ_OK,
- DSA_LOOP_PHY_READ_ERR,
- DSA_LOOP_PHY_WRITE_OK,
- DSA_LOOP_PHY_WRITE_ERR,
- __DSA_LOOP_CNT_MAX,
-};
-
static struct dsa_loop_mib_entry dsa_loop_mibs[] = {
[DSA_LOOP_PHY_READ_OK] = { "phy_read_ok", },
[DSA_LOOP_PHY_READ_ERR] = { "phy_read_err", },
@@ -43,19 +26,6 @@ static struct dsa_loop_mib_entry dsa_loop_mibs[] = {
[DSA_LOOP_PHY_WRITE_ERR] = { "phy_write_err", },
};
-struct dsa_loop_port {
- struct dsa_loop_mib_entry mib[__DSA_LOOP_CNT_MAX];
- u16 pvid;
-};
-
-struct dsa_loop_priv {
- struct mii_bus *bus;
- unsigned int port_base;
- struct dsa_loop_vlan vlans[VLAN_N_VID];
- struct net_device *netdev;
- struct dsa_loop_port ports[DSA_MAX_PORTS];
-};
-
static struct phy_device *phydevs[PHY_MAX_ADDR];
static enum dsa_tag_protocol dsa_loop_get_protocol(struct dsa_switch *ds,
new file mode 100644
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef DSA_LOOP_H
+#define DSA_LOOP_H
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <net/dsa.h>
+
+struct dsa_loop_vlan {
+ u16 members;
+ u16 untagged;
+};
+
+struct dsa_loop_mib_entry {
+ char name[ETH_GSTRING_LEN];
+ unsigned long val;
+};
+
+enum dsa_loop_mib_counters {
+ DSA_LOOP_PHY_READ_OK,
+ DSA_LOOP_PHY_READ_ERR,
+ DSA_LOOP_PHY_WRITE_OK,
+ DSA_LOOP_PHY_WRITE_ERR,
+ __DSA_LOOP_CNT_MAX,
+};
+
+struct dsa_loop_port {
+ struct dsa_loop_mib_entry mib[__DSA_LOOP_CNT_MAX];
+ u16 pvid;
+};
+
+struct dsa_loop_priv {
+ struct mii_bus *bus;
+ unsigned int port_base;
+ struct dsa_loop_vlan vlans[VLAN_N_VID];
+ struct net_device *netdev;
+ struct dsa_loop_port ports[DSA_MAX_PORTS];
+};
+
+#endif /* DSA_LOOP_H */
In preparation for adding support for a mockup data path, move the driver data structures to include/linux/dsa/loop.h such that we can share them between net/dsa/ and drivers/net/dsa/ later on. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/dsa_loop.c | 32 +----------------------------- include/linux/dsa/loop.h | 40 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 31 deletions(-) create mode 100644 include/linux/dsa/loop.h