@@ -645,7 +645,7 @@ void brcms_c_ampdu_finalize(struct brcms_ampdu_session *session)
u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
u32 rspec = 0, rspec_fallback = 0;
u32 rts_rspec = 0, rts_rspec_fallback = 0;
- u8 plcp0, plcp3, is40, sgi, mcs;
+ u8 plcp0, is40, mcs;
u16 mch;
u8 preamble_type = BRCMS_GF_PREAMBLE;
u8 fbr_preamble_type = BRCMS_GF_PREAMBLE;
@@ -704,15 +704,12 @@ void brcms_c_ampdu_finalize(struct brcms_ampdu_session *session)
txh->MacTxControlLow = cpu_to_le16(mcl);
fbr = txrate[1].count > 0;
- if (!fbr) {
+ if (!fbr)
plcp0 = plcp[0];
- plcp3 = plcp[3];
- } else {
+ else
plcp0 = txh->FragPLCPFallback[0];
- plcp3 = txh->FragPLCPFallback[3];
- }
+
is40 = (plcp0 & MIMO_PLCP_40MHZ) ? 1 : 0;
- sgi = plcp3_issgi(plcp3) ? 1 : 0;
mcs = plcp0 & ~MIMO_PLCP_40MHZ;
if (is40) {
@@ -850,10 +847,9 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
bool ba_recd = false, ack_recd = false;
u8 suc_mpdu = 0, tot_mpdu = 0;
uint supr_status;
- bool update_rate = true, retry = true, tx_error = false;
+ bool update_rate = true, retry = true;
u16 mimoantsel = 0;
- u8 antselid = 0;
- u8 retry_limit, rr_retry_limit;
+ u8 retry_limit;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(p);
#ifdef DEBUG
@@ -866,7 +862,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
ini = &scb_ampdu->ini[tid];
retry_limit = ampdu->retry_limit_tid[tid];
- rr_retry_limit = ampdu->rr_retry_limit_tid[tid];
memset(bitmap, 0, sizeof(bitmap));
queue = txs->frameid & TXFID_QUEUE_MASK;
supr_status = txs->status & TX_STATUS_SUPR_MASK;
@@ -923,8 +918,7 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
* if there were underflows, but pre-loading
* is not active, notify rate adaptation.
*/
- if (brcms_c_ffpld_check_txfunfl(wlc, queue) > 0)
- tx_error = true;
+ brcms_c_ffpld_check_txfunfl(wlc, queue);
}
} else if (txs->phyerr) {
update_rate = false;
@@ -1023,7 +1017,7 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
}
/* update rate state */
- antselid = brcms_c_antsel_antsel2id(wlc->asi, mimoantsel);
+ brcms_c_antsel_antsel2id(wlc->asi, mimoantsel);
}
void
@@ -1032,11 +1026,7 @@ brcms_c_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb *scb,
{
struct scb_ampdu *scb_ampdu;
struct brcms_c_info *wlc = ampdu->wlc;
- struct scb_ampdu_tid_ini *ini;
u32 s1 = 0, s2 = 0;
- struct ieee80211_tx_info *tx_info;
-
- tx_info = IEEE80211_SKB_CB(p);
/* BMAC_NOTE: For the split driver, second level txstatus comes later
* So if the ACK was received then wait for the second level else just
@@ -1061,7 +1051,6 @@ brcms_c_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb *scb,
if (scb) {
scb_ampdu = &scb->scb_ampdu;
- ini = &scb_ampdu->ini[p->priority];
brcms_c_ampdu_dotxstatus_complete(ampdu, scb, p, txs, s1, s2);
} else {
/* loop through all pkts and free */
@@ -1069,7 +1058,6 @@ brcms_c_ampdu_dotxstatus(struct ampdu_info *ampdu, struct scb *scb,
struct d11txh *txh;
u16 mcl;
while (p) {
- tx_info = IEEE80211_SKB_CB(p);
txh = (struct d11txh *) p->data;
trace_brcms_txdesc(&wlc->hw->d11core->dev, txh,
sizeof(*txh));
Fixes the following W=1 kernel build warning(s): from drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:18: drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c: In function ‘brcms_c_ampdu_finalize’: drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:648:25: warning: variable ‘sgi’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c: In function ‘brcms_c_ampdu_dotxstatus_complete’: drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:856:18: warning: variable ‘rr_retry_limit’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:855:5: warning: variable ‘antselid’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:853:41: warning: variable ‘tx_error’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:853:7: warning: variable ‘update_rate’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c: In function ‘brcms_c_ampdu_dotxstatus’: drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:1037:28: warning: variable ‘tx_info’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/broadcom/brcm80211/brcmsmac/ampdu.c:1035:28: warning: variable ‘ini’ set but not used [-Wunused-but-set-variable] Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> --- .../broadcom/brcm80211/brcmsmac/ampdu.c | 28 ++++++------------- 1 file changed, 8 insertions(+), 20 deletions(-)