@@ -17,6 +17,12 @@ / {
compatible = "fsl,ls1088a-rdb", "fsl,ls1088a";
};
+&dpmac2 {
+ phy-handle = <&mdio2_aquantia_phy>;
+ phy-connection-type = "10gbase-r";
+ pcs-handle = <&pcs2>;
+};
+
&dpmac3 {
phy-handle = <&mdio1_phy5>;
phy-connection-type = "qsgmii";
@@ -109,6 +115,15 @@ mdio1_phy8: emdio1_phy@8 {
};
};
+&emdio2 {
+ status = "okay";
+
+ mdio2_aquantia_phy: emdio2_aquantia@0 {
+ compatible = "ethernet-phy-ieee802.3-c45";
+ reg = <0x0>;
+ };
+};
+
&i2c0 {
status = "okay";
@@ -179,6 +194,10 @@ &esdhc {
status = "okay";
};
+&pcs_mdio2 {
+ status = "okay";
+};
+
&pcs_mdio3 {
status = "okay";
};
@@ -672,6 +672,19 @@ emdio2: mdio@0x8B97000 {
status = "disabled";
};
+ pcs_mdio2: mdio@8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ pcs2: pcs-phy@0 {
+ reg = <0>;
+ };
+ };
+
pcs_mdio3: mdio@8c0f000 {
compatible = "fsl,fman-memac-mdio";
reg = <0x0 0x8c0f000 0x0 0x1000>;
Annotate the external MDIO2 node and describe the 10GBASER PHY found on the LS1088ARDB board and add a phy-handle for DPMAC2 to link it. Also, add the internal PCS MDIO node for the internal MDIO buses found on the LS1088A SoC along with its internal PCS PHY and link the corresponding DPMAC to the PCS through the pcs-handle. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> --- .../boot/dts/freescale/fsl-ls1088a-rdb.dts | 19 +++++++++++++++++++ .../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 13 +++++++++++++ 2 files changed, 32 insertions(+)