diff mbox series

[net,5/9] net/mlx5: Add handling of port type in rule deletion

Message ID 20201117195702.386113-6-saeedm@nvidia.com
State New
Headers show
Series None | expand

Commit Message

Saeed Mahameed Nov. 17, 2020, 7:56 p.m. UTC 
From: Michael Guralnik <michaelgur@nvidia.com>

Handle destruction of rules with port destination type to enable
full destruction of flow.

Without this handling of TX rules the deletion of these rules fails.
Dmesg of flow destruction failure:

[  203.714146] mlx5_core 0000:00:0b.0: mlx5_cmd_check:753:(pid 342): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a)
[  210.547387] ------------[ cut here ]------------
[  210.548663] refcount_t: decrement hit 0; leaking memory.
[  210.550651] WARNING: CPU: 4 PID: 342 at lib/refcount.c:31 refcount_warn_saturate+0x5c/0x110
[  210.550654] Modules linked in: mlx5_ib mlx5_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core
[  210.550675] CPU: 4 PID: 342 Comm: test Not tainted 5.8.0-rc2+ #116
[  210.550678] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  210.550680] RIP: 0010:refcount_warn_saturate+0x5c/0x110
[  210.550685] Code: c6 d1 1b 01 00 0f 84 ad 00 00 00 5b 5d c3 80 3d b5 d1 1b 01 00 75 f4 48 c7 c7 20 d1 15 82 c6 05 a5 d1 1b 01 01 e8 a7 eb af ff <0f> 0b eb dd 80 3d 99 d1 1b 01 00 75 d4 48 c7 c7 c0 cf 15 82 c6 05
[  210.550687] RSP: 0018:ffff8881642e77e8 EFLAGS: 00010282
[  210.550691] RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000
[  210.550694] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102c85ceef
[  210.550696] RBP: ffff888161720428 R08: ffffffff8124c10e R09: ffffed103243beae
[  210.550698] R10: ffff8881921df56b R11: ffffed103243bead R12: ffff8881841b4180
[  210.550701] R13: ffff888161720428 R14: ffff8881616d0000 R15: ffff888161720380
[  210.550704] FS:  00007fc27f025740(0000) GS:ffff888192000000(0000) knlGS:0000000000000000
[  210.550706] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  210.550708] CR2: 0000557e4b41a6a0 CR3: 0000000002415004 CR4: 0000000000360ea0
[  210.550711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  210.550713] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  210.550715] Call Trace:
[  210.550717]  mlx5_del_flow_rules+0x484/0x490 [mlx5_core]
[  210.550720]  ? mlx5_cmd_set_fte+0xa80/0xa80 [mlx5_core]
[  210.550722]  mlx5_ib_destroy_flow+0x17f/0x280 [mlx5_ib]
[  210.550724]  uverbs_free_flow+0x4c/0x90 [ib_uverbs]
[  210.550726]  destroy_hw_idr_uobject+0x41/0xb0 [ib_uverbs]
[  210.550728]  uverbs_destroy_uobject+0xaa/0x390 [ib_uverbs]
[  210.550731]  __uverbs_cleanup_ufile+0x129/0x1b0 [ib_uverbs]
[  210.550733]  ? uverbs_destroy_uobject+0x390/0x390 [ib_uverbs]
[  210.550735]  uverbs_destroy_ufile_hw+0x78/0x190 [ib_uverbs]
[  210.550737]  ib_uverbs_close+0x36/0x140 [ib_uverbs]
[  210.550739]  __fput+0x181/0x380
[  210.550741]  task_work_run+0x88/0xd0
[  210.550743]  do_exit+0x5f6/0x13b0
[  210.550745]  ? sched_clock_cpu+0x30/0x140
[  210.550747]  ? is_current_pgrp_orphaned+0x70/0x70
[  210.550750]  ? lock_downgrade+0x360/0x360
[  210.550752]  ? mark_held_locks+0x1d/0x90
[  210.550754]  do_group_exit+0x8a/0x140
[  210.550756]  get_signal+0x20a/0xf50
[  210.550758]  do_signal+0x8c/0xbe0
[  210.550760]  ? hrtimer_nanosleep+0x1d8/0x200
[  210.550762]  ? nanosleep_copyout+0x50/0x50
[  210.550764]  ? restore_sigcontext+0x320/0x320
[  210.550766]  ? __hrtimer_init+0xf0/0xf0
[  210.550768]  ? timespec64_add_safe+0x150/0x150
[  210.550770]  ? mark_held_locks+0x1d/0x90
[  210.550772]  ? lockdep_hardirqs_on_prepare+0x14c/0x240
[  210.550774]  __prepare_exit_to_usermode+0x119/0x170
[  210.550776]  do_syscall_64+0x65/0x300
[  210.550778]  ? trace_hardirqs_off+0x10/0x120
[  210.550781]  ? mark_held_locks+0x1d/0x90
[  210.550783]  ? asm_sysvec_apic_timer_interrupt+0xa/0x20
[  210.550785]  ? lockdep_hardirqs_on+0x112/0x190
[  210.550787]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  210.550789] RIP: 0033:0x7fc27f1cd157
[  210.550791] Code: Bad RIP value.
[  210.550793] RSP: 002b:00007ffd4db27ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000023
[  210.550798] RAX: fffffffffffffdfc RBX: ffffffffffffff80 RCX: 00007fc27f1cd157
[  210.550800] RDX: 00007fc27f025740 RSI: 00007ffd4db27eb0 RDI: 00007ffd4db27eb0
[  210.550803] RBP: 0000000000000016 R08: 0000000000000000 R09: 000000000000000e
[  210.550805] R10: 00007ffd4db27dc7 R11: 0000000000000246 R12: 0000000000400c00
[  210.550808] R13: 00007ffd4db285f0 R14: 0000000000000000 R15: 0000000000000000
[  210.550809] irq event stamp: 49399
[  210.550812] hardirqs last  enabled at (49399): [<ffffffff81172d36>] console_unlock+0x556/0x6f0
[  210.550815] hardirqs last disabled at (49398): [<ffffffff81172897>] console_unlock+0xb7/0x6f0
[  210.550818] softirqs last  enabled at (48706): [<ffffffff81e0037b>] __do_softirq+0x37b/0x60c
[  210.550820] softirqs last disabled at (48697): [<ffffffff81c00e2f>] asm_call_on_stack+0xf/0x20
[  210.550822] ---[ end trace ad18c0e6fa846454 ]---
[  210.581862] mlx5_core 0000:00:0c.0: mlx5_destroy_flow_table:2132:(pid 342): Flow table 262150 wasn't destroyed, refcount > 1

Fixes: a7ee18bdee83 ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table")
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
index 325a5b0d6829..9fdd99272e31 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -534,6 +534,13 @@  static void del_sw_hw_rule(struct fs_node *node)
 		goto out;
 	}
 
+	if (rule->dest_attr.type == MLX5_FLOW_DESTINATION_TYPE_PORT &&
+	    --fte->dests_size) {
+		fte->modify_mask |= BIT(MLX5_SET_FTE_MODIFY_ENABLE_MASK_ACTION);
+		fte->action.action &= ~MLX5_FLOW_CONTEXT_ACTION_ALLOW;
+		goto out;
+	}
+
 	if ((fte->action.action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) &&
 	    --fte->dests_size) {
 		fte->modify_mask |=