@@ -493,6 +493,20 @@ static inline bool dsa_port_is_vlan_filtering(const struct dsa_port *dp)
return dp->vlan_filtering;
}
+static inline
+struct net_device *dsa_port_to_bridge_port(const struct dsa_port *dp)
+{
+ if (!dp->bridge_dev)
+ return NULL;
+
+ if (dp->lag_dev)
+ return dp->lag_dev;
+ else if (dp->hsr_dev)
+ return dp->hsr_dev;
+
+ return dp->slave;
+}
+
typedef int dsa_fdb_dump_cb_t(const unsigned char *addr, u16 vid,
bool is_static, void *data);
struct dsa_switch_ops {
@@ -233,19 +233,7 @@ extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
static inline bool dsa_port_offloads_bridge_port(struct dsa_port *dp,
struct net_device *dev)
{
- /* Switchdev offloading can be configured on: */
-
- if (dev == dp->slave)
- /* DSA ports directly connected to a bridge, and event
- * was emitted for the ports themselves.
- */
- return true;
-
- if (dp->lag_dev == dev)
- /* DSA ports connected to a bridge via a LAG */
- return true;
-
- return false;
+ return dsa_port_to_bridge_port(dp) == dev;
}
static inline bool dsa_port_offloads_bridge(struct dsa_port *dp,
In order for a driver to be able to query a bridge for information about itself, e.g. reading out port flags, it has to use a netdev that is known to the bridge. In the simple case, that is just the netdev representing the port, e.g. swp0 or swp1 in this example: br0 / \ swp0 swp1 But in the case of an offloaded lag, this will be the bond or team interface, e.g. bond0 in this example: br0 / bond0 / \ swp0 swp1 Add a helper that hides some of this complexity from the drivers. Then, redefine dsa_port_offloads_bridge_port using the helper to avoid double accounting of the set of possible offloaded uppers. Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> --- include/net/dsa.h | 14 ++++++++++++++ net/dsa/dsa_priv.h | 14 +------------- 2 files changed, 15 insertions(+), 13 deletions(-)