@@ -16111,6 +16111,13 @@ L: netdev@vger.kernel.org
S: Supported
F: drivers/net/ethernet/synopsys/
+SYNOPSYS DESIGNWARE ETHERNET XPCS DRIVER
+M: Jose Abreu <Jose.Abreu@synopsys.com>
+L: netdev@vger.kernel.org
+S: Supported
+F: drivers/net/phy/mdio-xpcs.c
+F: include/linux/mdio-xpcs.h
+
SYNOPSYS DESIGNWARE I2C DRIVER
M: Jarkko Nikula <jarkko.nikula@linux.intel.com>
R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
@@ -214,6 +214,12 @@ config MDIO_XGENE
This module provides a driver for the MDIO busses found in the
APM X-Gene SoC's.
+config MDIO_XPCS
+ tristate "Synopsys DesignWare XPCS controller"
+ help
+ This module provides helper functions for Synopsys DesignWare XPCS
+ controllers.
+
endif
endif
@@ -44,6 +44,7 @@ obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
+obj-$(CONFIG_MDIO_XPCS) += mdio-xpcs.o
obj-$(CONFIG_NETWORK_PHY_TIMESTAMPING) += mii_timestamper.o
new file mode 100644
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
+ * Synopsys DesignWare XPCS helpers
+ *
+ * Author: Jose Abreu <Jose.Abreu@synopsys.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/mdio.h>
+#include <linux/mdio-xpcs.h>
+#include <linux/phylink.h>
+#include <linux/workqueue.h>
+
+#define SYNOPSYS_XPCS_USXGMII_ID 0x7996ced0
+#define SYNOPSYS_XPCS_10GKR_ID 0x7996ced0
+#define SYNOPSYS_XPCS_MASK 0xffffffff
+
+/* Vendor regs access */
+#define DW_VENDOR BIT(15)
+
+/* VR_XS_PCS */
+#define DW_USXGMII_RST BIT(10)
+#define DW_USXGMII_EN BIT(9)
+#define DW_VR_XS_PCS_DIG_STS 0x0010
+#define DW_RXFIFO_ERR GENMASK(6, 5)
+
+/* SR_MII */
+#define DW_USXGMII_FULL BIT(8)
+#define DW_USXGMII_SS_MASK (BIT(13) | BIT(6) | BIT(5))
+#define DW_USXGMII_10000 (BIT(13) | BIT(6))
+#define DW_USXGMII_5000 (BIT(13) | BIT(5))
+#define DW_USXGMII_2500 (BIT(5))
+#define DW_USXGMII_1000 (BIT(6))
+#define DW_USXGMII_100 (BIT(13))
+#define DW_USXGMII_10 (0)
+
+/* SR_AN */
+#define DW_SR_AN_ADV1 0x10
+#define DW_SR_AN_ADV2 0x11
+#define DW_SR_AN_ADV3 0x12
+#define DW_SR_AN_LP_ABL1 0x13
+#define DW_SR_AN_LP_ABL2 0x14
+#define DW_SR_AN_LP_ABL3 0x15
+
+/* Clause 73 Defines */
+/* AN_LP_ABL1 */
+#define DW_C73_PAUSE BIT(10)
+#define DW_C73_ASYM_PAUSE BIT(11)
+#define DW_C73_AN_ADV_SF 0x1
+/* AN_LP_ABL2 */
+#define DW_C73_1000KX BIT(5)
+#define DW_C73_10000KX4 BIT(6)
+#define DW_C73_10000KR BIT(7)
+/* AN_LP_ABL3 */
+#define DW_C73_2500KX BIT(0)
+#define DW_C73_5000KR BIT(1)
+
+static const int xpcs_usxgmii_features[] = {
+ ETHTOOL_LINK_MODE_Pause_BIT,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ ETHTOOL_LINK_MODE_Autoneg_BIT,
+ ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+ ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
+ __ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const int xpcs_10gkr_features[] = {
+ ETHTOOL_LINK_MODE_Pause_BIT,
+ ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+ __ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const phy_interface_t xpcs_usxgmii_interfaces[] = {
+ PHY_INTERFACE_MODE_USXGMII,
+ PHY_INTERFACE_MODE_MAX,
+};
+
+static const phy_interface_t xpcs_10gkr_interfaces[] = {
+ PHY_INTERFACE_MODE_10GKR,
+ PHY_INTERFACE_MODE_MAX,
+};
+
+static struct xpcs_id {
+ u32 id;
+ u32 mask;
+ const int *supported;
+ const phy_interface_t *interface;
+} xpcs_id_list[] = {
+ {
+ .id = SYNOPSYS_XPCS_USXGMII_ID,
+ .mask = SYNOPSYS_XPCS_MASK,
+ .supported = xpcs_usxgmii_features,
+ .interface = xpcs_usxgmii_interfaces,
+ }, {
+ .id = SYNOPSYS_XPCS_10GKR_ID,
+ .mask = SYNOPSYS_XPCS_MASK,
+ .supported = xpcs_10gkr_features,
+ .interface = xpcs_10gkr_interfaces,
+ },
+};
+
+static int xpcs_read(struct mdio_xpcs_args *xpcs, int dev, u32 reg)
+{
+ u32 reg_addr = MII_ADDR_C45 | dev << 16 | reg;
+
+ return mdiobus_read(xpcs->bus, xpcs->addr, reg_addr);
+}
+
+static int xpcs_write(struct mdio_xpcs_args *xpcs, int dev, u32 reg, u16 val)
+{
+ u32 reg_addr = MII_ADDR_C45 | dev << 16 | reg;
+
+ return mdiobus_write(xpcs->bus, xpcs->addr, reg_addr, val);
+}
+
+static int xpcs_read_vendor(struct mdio_xpcs_args *xpcs, int dev, u32 reg)
+{
+ return xpcs_read(xpcs, dev, DW_VENDOR | reg);
+}
+
+static int xpcs_write_vendor(struct mdio_xpcs_args *xpcs, int dev, int reg,
+ u16 val)
+{
+ return xpcs_write(xpcs, dev, DW_VENDOR | reg, val);
+}
+
+static int xpcs_read_vpcs(struct mdio_xpcs_args *xpcs, int reg)
+{
+ return xpcs_read_vendor(xpcs, MDIO_MMD_PCS, reg);
+}
+
+static int xpcs_write_vpcs(struct mdio_xpcs_args *xpcs, int reg, u16 val)
+{
+ return xpcs_write_vendor(xpcs, MDIO_MMD_PCS, reg, val);
+}
+
+static int xpcs_poll_reset(struct mdio_xpcs_args *xpcs, int dev)
+{
+ /* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
+ unsigned int retries = 12;
+ int ret;
+
+ do {
+ msleep(50);
+ ret = xpcs_read(xpcs, dev, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+ } while (ret & MDIO_CTRL1_RESET && --retries);
+
+ return (ret & MDIO_CTRL1_RESET) ? -ETIMEDOUT : 0;
+}
+
+static int xpcs_soft_reset(struct mdio_xpcs_args *xpcs, int dev)
+{
+ int ret;
+
+ ret = xpcs_write(xpcs, dev, MDIO_CTRL1, MDIO_CTRL1_RESET);
+ if (ret < 0)
+ return ret;
+
+ return xpcs_poll_reset(xpcs, dev);
+}
+
+#define xpcs_warn(__xpcs, __state, __args...) \
+({ \
+ if ((__state)->link) \
+ dev_warn(&(__xpcs)->bus->dev, ##__args); \
+})
+
+static int xpcs_read_fault(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state)
+{
+ int ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MDIO_STAT1_FAULT) {
+ xpcs_warn(xpcs, state, "Link fault condition detected!\n");
+ return -EFAULT;
+ }
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT2);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MDIO_STAT2_RXFAULT)
+ xpcs_warn(xpcs, state, "Receiver fault detected!\n");
+ if (ret & MDIO_STAT2_TXFAULT)
+ xpcs_warn(xpcs, state, "Transmitter fault detected!\n");
+
+ ret = xpcs_read_vendor(xpcs, MDIO_MMD_PCS, DW_VR_XS_PCS_DIG_STS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & DW_RXFIFO_ERR) {
+ xpcs_warn(xpcs, state, "FIFO fault condition detected!\n");
+ return -EFAULT;
+ }
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & MDIO_PCS_10GBRT_STAT1_BLKLK))
+ xpcs_warn(xpcs, state, "Link is not locked!\n");
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT2);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MDIO_PCS_10GBRT_STAT2_ERR)
+ xpcs_warn(xpcs, state, "Link has errors!\n");
+
+ return 0;
+}
+
+static int xpcs_read_link(struct mdio_xpcs_args *xpcs, bool an)
+{
+ bool link = true;
+ int ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & MDIO_STAT1_LSTATUS))
+ link = false;
+
+ if (an) {
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & MDIO_STAT1_LSTATUS))
+ link = false;
+ }
+
+ return link;
+}
+
+static int xpcs_get_max_usxgmii_speed(const unsigned long *supported)
+{
+ int max = SPEED_UNKNOWN;
+
+ if (phylink_test(supported, 1000baseKX_Full))
+ max = SPEED_1000;
+ if (phylink_test(supported, 2500baseX_Full))
+ max = SPEED_2500;
+ if (phylink_test(supported, 10000baseKX4_Full))
+ max = SPEED_10000;
+ if (phylink_test(supported, 10000baseKR_Full))
+ max = SPEED_10000;
+
+ return max;
+}
+
+static int xpcs_config_usxgmii(struct mdio_xpcs_args *xpcs, int speed)
+{
+ int ret, speed_sel;
+
+ switch (speed) {
+ case SPEED_10:
+ speed_sel = DW_USXGMII_10;
+ break;
+ case SPEED_100:
+ speed_sel = DW_USXGMII_100;
+ break;
+ case SPEED_1000:
+ speed_sel = DW_USXGMII_1000;
+ break;
+ case SPEED_2500:
+ speed_sel = DW_USXGMII_2500;
+ break;
+ case SPEED_5000:
+ speed_sel = DW_USXGMII_5000;
+ break;
+ case SPEED_10000:
+ speed_sel = DW_USXGMII_10000;
+ break;
+ default:
+ /* Nothing to do here */
+ return -EINVAL;
+ }
+
+ ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret = xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_EN);
+ if (ret < 0)
+ return ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~DW_USXGMII_SS_MASK;
+ ret |= speed_sel | DW_USXGMII_FULL;
+
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret);
+ if (ret < 0)
+ return ret;
+
+ ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ return xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_RST);
+}
+
+static int xpcs_config_aneg_c73(struct mdio_xpcs_args *xpcs)
+{
+ int ret, adv;
+
+ /* By default, in USXGMII mode XPCS operates at 10G baud and
+ * replicates data to achieve lower speeds. Hereby, in this
+ * default configuration we need to advertise all supported
+ * modes and not only the ones we want to use.
+ */
+
+ /* SR_AN_ADV3 */
+ adv = 0;
+ if (phylink_test(xpcs->supported, 2500baseX_Full))
+ adv |= DW_C73_2500KX;
+
+ /* TODO: 5000baseKR */
+
+ ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV3, adv);
+ if (ret < 0)
+ return ret;
+
+ /* SR_AN_ADV2 */
+ adv = 0;
+ if (phylink_test(xpcs->supported, 1000baseKX_Full))
+ adv |= DW_C73_1000KX;
+ if (phylink_test(xpcs->supported, 10000baseKX4_Full))
+ adv |= DW_C73_10000KX4;
+ if (phylink_test(xpcs->supported, 10000baseKR_Full))
+ adv |= DW_C73_10000KR;
+
+ ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV2, adv);
+ if (ret < 0)
+ return ret;
+
+ /* SR_AN_ADV1 */
+ adv = DW_C73_AN_ADV_SF;
+ if (phylink_test(xpcs->supported, Pause))
+ adv |= DW_C73_PAUSE;
+ if (phylink_test(xpcs->supported, Asym_Pause))
+ adv |= DW_C73_ASYM_PAUSE;
+
+ return xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV1, adv);
+}
+
+static int xpcs_config_aneg(struct mdio_xpcs_args *xpcs)
+{
+ int ret;
+
+ ret = xpcs_config_aneg_c73(xpcs);
+ if (ret < 0)
+ return ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_CTRL1);
+ if (ret < 0)
+ return ret;
+
+ ret |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
+
+ return xpcs_write(xpcs, MDIO_MMD_AN, MDIO_CTRL1, ret);
+}
+
+static int xpcs_aneg_done(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state)
+{
+ int ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MDIO_AN_STAT1_COMPLETE) {
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1);
+ if (ret < 0)
+ return ret;
+
+ /* Check if Aneg outcome is valid */
+ if (!(ret & DW_C73_AN_ADV_SF))
+ return 0;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+static int xpcs_read_lpa(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state)
+{
+ int ret;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1);
+ if (ret < 0)
+ return ret;
+
+ if (!(ret & MDIO_AN_STAT1_LPABLE)) {
+ phylink_clear(state->lp_advertising, Autoneg);
+ return 0;
+ }
+
+ phylink_set(state->lp_advertising, Autoneg);
+
+ /* Clause 73 outcome */
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL3);
+ if (ret < 0)
+ return ret;
+
+ if (ret & DW_C73_2500KX)
+ phylink_set(state->lp_advertising, 2500baseX_Full);
+
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL2);
+ if (ret < 0)
+ return ret;
+
+ if (ret & DW_C73_1000KX)
+ phylink_set(state->lp_advertising, 1000baseKX_Full);
+ if (ret & DW_C73_10000KX4)
+ phylink_set(state->lp_advertising, 10000baseKX4_Full);
+ if (ret & DW_C73_10000KR)
+ phylink_set(state->lp_advertising, 10000baseKR_Full);
+
+ ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1);
+ if (ret < 0)
+ return ret;
+
+ if (ret & DW_C73_PAUSE)
+ phylink_set(state->lp_advertising, Pause);
+ if (ret & DW_C73_ASYM_PAUSE)
+ phylink_set(state->lp_advertising, Asym_Pause);
+
+ linkmode_and(state->lp_advertising, state->lp_advertising,
+ state->advertising);
+ return 0;
+}
+
+static void xpcs_resolve_lpa(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state)
+{
+ int max_speed = xpcs_get_max_usxgmii_speed(state->lp_advertising);
+
+ state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
+ state->speed = max_speed;
+ state->duplex = DUPLEX_FULL;
+}
+
+static void xpcs_resolve_pma(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state)
+{
+ state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
+ state->duplex = DUPLEX_FULL;
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_10GKR:
+ state->speed = SPEED_10000;
+ break;
+ default:
+ state->speed = SPEED_UNKNOWN;
+ break;
+ }
+}
+
+static int xpcs_validate(struct mdio_xpcs_args *xpcs,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ linkmode_and(supported, supported, xpcs->supported);
+ linkmode_and(state->advertising, state->advertising, xpcs->supported);
+ return 0;
+}
+
+static int xpcs_config(struct mdio_xpcs_args *xpcs,
+ const struct phylink_link_state *state)
+{
+ int ret;
+
+ if (state->an_enabled) {
+ ret = xpcs_config_aneg(xpcs);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int xpcs_get_state(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state)
+{
+ int ret;
+
+ /* Link needs to be read first ... */
+ state->link = xpcs_read_link(xpcs, state->an_enabled) > 0 ? 1 : 0;
+
+ /* ... and then we check the faults. */
+ ret = xpcs_read_fault(xpcs, state);
+ if (ret) {
+ ret = xpcs_soft_reset(xpcs, MDIO_MMD_PCS);
+ if (ret)
+ return ret;
+
+ state->link = 0;
+
+ return xpcs_config(xpcs, state);
+ }
+
+ if (state->link && state->an_enabled && xpcs_aneg_done(xpcs, state)) {
+ state->an_complete = true;
+ xpcs_read_lpa(xpcs, state);
+ xpcs_resolve_lpa(xpcs, state);
+ } else if (state->link) {
+ xpcs_resolve_pma(xpcs, state);
+ }
+
+ return 0;
+}
+
+static int xpcs_link_up(struct mdio_xpcs_args *xpcs, int speed,
+ phy_interface_t interface)
+{
+ if (interface == PHY_INTERFACE_MODE_USXGMII)
+ return xpcs_config_usxgmii(xpcs, speed);
+
+ return 0;
+}
+
+static u32 xpcs_get_id(struct mdio_xpcs_args *xpcs)
+{
+ int ret;
+ u32 id;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID1);
+ if (ret < 0)
+ return 0xffffffff;
+
+ id = ret << 16;
+
+ ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID2);
+ if (ret < 0)
+ return 0xffffffff;
+
+ return id | ret;
+}
+
+static bool xpcs_check_features(struct mdio_xpcs_args *xpcs,
+ struct xpcs_id *match,
+ phy_interface_t interface)
+{
+ int i;
+
+ for (i = 0; match->interface[i] != PHY_INTERFACE_MODE_MAX; i++) {
+ if (match->interface[i] == interface)
+ break;
+ }
+
+ if (match->interface[i] == PHY_INTERFACE_MODE_MAX)
+ return false;
+
+ for (i = 0; match->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++)
+ set_bit(match->supported[i], xpcs->supported);
+
+ return true;
+}
+
+static int xpcs_probe(struct mdio_xpcs_args *xpcs, phy_interface_t interface)
+{
+ u32 xpcs_id = xpcs_get_id(xpcs);
+ struct xpcs_id *match = NULL;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(xpcs_id_list); i++) {
+ struct xpcs_id *entry = &xpcs_id_list[i];
+
+ if ((xpcs_id & entry->mask) == entry->id) {
+ match = entry;
+
+ if (xpcs_check_features(xpcs, match, interface))
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
+static struct mdio_xpcs_ops xpcs_ops = {
+ .validate = xpcs_validate,
+ .config = xpcs_config,
+ .get_state = xpcs_get_state,
+ .link_up = xpcs_link_up,
+ .probe = xpcs_probe,
+};
+
+struct mdio_xpcs_ops *mdio_xpcs_get_ops(void)
+{
+ return &xpcs_ops;
+}
+EXPORT_SYMBOL_GPL(mdio_xpcs_get_ops);
+
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
+ * Synopsys DesignWare XPCS helpers
+ */
+
+#ifndef __LINUX_MDIO_XPCS_H
+#define __LINUX_MDIO_XPCS_H
+
+#include <linux/phy.h>
+#include <linux/phylink.h>
+
+struct mdio_xpcs_args {
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+ struct mii_bus *bus;
+ int addr;
+};
+
+struct mdio_xpcs_ops {
+ int (*validate)(struct mdio_xpcs_args *xpcs,
+ unsigned long *supported,
+ struct phylink_link_state *state);
+ int (*config)(struct mdio_xpcs_args *xpcs,
+ const struct phylink_link_state *state);
+ int (*get_state)(struct mdio_xpcs_args *xpcs,
+ struct phylink_link_state *state);
+ int (*link_up)(struct mdio_xpcs_args *xpcs, int speed,
+ phy_interface_t interface);
+ int (*probe)(struct mdio_xpcs_args *xpcs, phy_interface_t interface);
+};
+
+#if IS_ENABLED(CONFIG_MDIO_XPCS)
+struct mdio_xpcs_ops *mdio_xpcs_get_ops(void);
+#else
+static inline struct mdio_xpcs_ops *mdio_xpcs_get_ops(void)
+{
+ return NULL;
+}
+#endif
+
+#endif /* __LINUX_MDIO_XPCS_H */
Synopsys DesignWare XPCS is an MMD that can manage link status, auto-negotiation, link training, ... In this commit we add basic support for XPCS using USXGMII interface and Clause 73 Auto-negotiation. This is highly tied with PHYLINK and can't be used without it. A given ethernet driver can use the provided callbacks to add the support for XPCS. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> --- Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org --- MAINTAINERS | 7 + drivers/net/phy/Kconfig | 6 + drivers/net/phy/Makefile | 1 + drivers/net/phy/mdio-xpcs.c | 612 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mdio-xpcs.h | 41 +++ 5 files changed, 667 insertions(+) create mode 100644 drivers/net/phy/mdio-xpcs.c create mode 100644 include/linux/mdio-xpcs.h