@@ -5,7 +5,8 @@ KSFT_KHDR_INSTALL := 1
CFLAGS = -Wall -Wl,--no-as-needed -O2 -g -I$(top_srcdir)/usr/include
-TEST_PROGS := mptcp_connect.sh pm_netlink.sh mptcp_join.sh diag.sh
+TEST_PROGS := mptcp_connect.sh pm_netlink.sh mptcp_join.sh diag.sh \
+ simult_flows.sh
TEST_GEN_FILES = mptcp_connect pm_nl_ctl
new file mode 100755
@@ -0,0 +1,293 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+rndh=$(printf %x $sec)-$(mktemp -u XXXXXX)
+ns1="ns1-$rndh"
+ns2="ns2-$rndh"
+ns3="ns3-$rndh"
+capture=false
+ksft_skip=4
+timeout=30
+test_cnt=1
+ret=0
+bail=0
+
+usage() {
+ echo "Usage: $0 [ -b ] [ -c ] [ -d ]"
+ echo -e "\t-b: bail out after first error, otherwise runs al testcases"
+ echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)"
+ echo -e "\t-d: debug this script"
+}
+
+cleanup()
+{
+ rm -f "$cin" "$cout"
+ rm -f "$sin" "$sout"
+ rm -f "$capout"
+
+ local netns
+ for netns in "$ns1" "$ns2" "$ns3";do
+ ip netns del $netns
+ done
+}
+
+ip -Version > /dev/null 2>&1
+if [ $? -ne 0 ];then
+ echo "SKIP: Could not run test without ip tool"
+ exit $ksft_skip
+fi
+
+# "$ns1" ns2 ns3
+# ns1eth1 ns2eth1 ns2eth3 ns3eth1
+# netem
+# ns1eth2 ns2eth2
+# netem
+
+setup()
+{
+ large=$(mktemp)
+ small=$(mktemp)
+ sout=$(mktemp)
+ cout=$(mktemp)
+ capout=$(mktemp)
+ size=$((2048 * 4096))
+ dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1
+ dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1
+
+ trap cleanup EXIT
+
+ for i in "$ns1" "$ns2" "$ns3";do
+ ip netns add $i || exit $ksft_skip
+ ip -net $i link set lo up
+ done
+
+ ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2"
+ ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2"
+ ip link add ns2eth3 netns "$ns2" type veth peer name ns3eth1 netns "$ns3"
+
+ ip -net "$ns1" addr add 10.0.1.1/24 dev ns1eth1
+ ip -net "$ns1" addr add dead:beef:1::1/64 dev ns1eth1 nodad
+ ip -net "$ns1" link set ns1eth1 up mtu 1500
+ ip -net "$ns1" route add default via 10.0.1.2
+ ip -net "$ns1" route add default via dead:beef:1::2
+
+ ip -net "$ns1" addr add 10.0.2.1/24 dev ns1eth2
+ ip -net "$ns1" addr add dead:beef:2::1/64 dev ns1eth2 nodad
+ ip -net "$ns1" link set ns1eth2 up mtu 1500
+ ip -net "$ns1" route add default via 10.0.2.2 metric 101
+ ip -net "$ns1" route add default via dead:beef:2::2 metric 101
+
+ ip netns exec "$ns1" ./pm_nl_ctl limits 1 1
+ ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow
+ ip netns exec "$ns1" sysctl -q net.ipv4.conf.all.rp_filter=0
+
+ ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1
+ ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad
+ ip -net "$ns2" link set ns2eth1 up mtu 1500
+
+ ip -net "$ns2" addr add 10.0.2.2/24 dev ns2eth2
+ ip -net "$ns2" addr add dead:beef:2::2/64 dev ns2eth2 nodad
+ ip -net "$ns2" link set ns2eth2 up mtu 1500
+
+ ip -net "$ns2" addr add 10.0.3.2/24 dev ns2eth3
+ ip -net "$ns2" addr add dead:beef:3::2/64 dev ns2eth3 nodad
+ ip -net "$ns2" link set ns2eth3 up mtu 1500
+ ip netns exec "$ns2" sysctl -q net.ipv4.ip_forward=1
+ ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.forwarding=1
+
+ ip -net "$ns3" addr add 10.0.3.3/24 dev ns3eth1
+ ip -net "$ns3" addr add dead:beef:3::3/64 dev ns3eth1 nodad
+ ip -net "$ns3" link set ns3eth1 up mtu 1500
+ ip -net "$ns3" route add default via 10.0.3.2
+ ip -net "$ns3" route add default via dead:beef:3::2
+
+ ip netns exec "$ns3" ./pm_nl_ctl limits 1 1
+}
+
+# $1: ns, $2: port
+wait_local_port_listen()
+{
+ local listener_ns="${1}"
+ local port="${2}"
+
+ local port_hex i
+
+ port_hex="$(printf "%04X" "${port}")"
+ for i in $(seq 10); do
+ ip netns exec "${listener_ns}" cat /proc/net/tcp* | \
+ awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" &&
+ break
+ sleep 0.1
+ done
+}
+
+do_transfer()
+{
+ local cin=$1
+ local sin=$2
+ local max_time=$3
+ local port
+ port=$((10000+$test_cnt))
+ test_cnt=$((test_cnt+1))
+
+ :> "$cout"
+ :> "$sout"
+ :> "$capout"
+
+ local addr_port
+ addr_port=$(printf "%s:%d" ${connect_addr} ${port})
+
+ if $capture; then
+ local capuser
+ if [ -z $SUDO_USER ] ; then
+ capuser=""
+ else
+ capuser="-Z $SUDO_USER"
+ fi
+
+ local capfile="${rndh}-${port}"
+ local capopt="-i any -s 65535 -B 32768 ${capuser}"
+
+ ip netns exec ${ns3} tcpdump ${capopt} -w "${capfile}-listener.pcap" >> "${capout}" 2>&1 &
+ local cappid_listener=$!
+
+ ip netns exec ${ns1} tcpdump ${capopt} -w "${capfile}-connector.pcap" >> "${capout}" 2>&1 &
+ local cappid_connector=$!
+
+ sleep 1
+ fi
+
+ ip netns exec ${ns3} ./mptcp_connect -jt $timeout -l -p $port 0.0.0.0 < "$sin" > "$sout" &
+ local spid=$!
+
+ wait_local_port_listen "${ns3}" "${port}"
+
+ local start
+ start=$(date +%s%3N)
+ ip netns exec ${ns1} ./mptcp_connect -jt $timeout -p $port 10.0.3.3 < "$cin" > "$cout" &
+ local cpid=$!
+
+ wait $cpid
+ local retc=$?
+ wait $spid
+ local rets=$?
+
+ local stop
+ stop=$(date +%s%3N)
+
+ if $capture; then
+ sleep 1
+ kill ${cappid_listener}
+ kill ${cappid_connector}
+ fi
+
+ local duration
+ duration=$((stop-start))
+
+ cmp $sin $cout > /dev/null 2>&1
+ local cmps=$?
+ cmp $cin $sout > /dev/null 2>&1
+ local cmpc=$?
+
+ printf "%16s" "$duration max $max_time "
+ if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \
+ [ $cmpc -eq 0 ] && [ $cmps -eq 0 ] && \
+ [ $duration -lt $max_time ]; then
+ echo "[ OK ]"
+ cat "$capout"
+ return 0
+ fi
+
+ echo " [ fail ]"
+ echo "client exit code $retc, server $rets" 1>&2
+ echo "\nnetns ${ns3} socket stat for $port:" 1>&2
+ ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port"
+ echo "\nnetns ${ns1} socket stat for $port:" 1>&2
+ ip netns exec ${ns1} ss -nita 1>&2 -o "dport = :$port"
+ ls -l $sin $cout
+ ls -l $cin $sout
+
+ cat "$capout"
+ return 1
+}
+
+run_test()
+{
+ local rate1=$1
+ local rate2=$2
+ local delay1=$3
+ local delay2=$4
+ local lret
+ local dev
+ shift 4
+ local msg=$*
+
+ [ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1=""
+ [ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2=""
+
+ for dev in ns1eth1 ns1eth2; do
+ tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1
+ done
+ for dev in ns2eth1 ns2eth2; do
+ tc -n $ns2 qdisc del dev $dev root >/dev/null 2>&1
+ done
+ tc -n $ns1 qdisc add dev ns1eth1 root netem rate ${rate1}mbit $delay1
+ tc -n $ns1 qdisc add dev ns1eth2 root netem rate ${rate2}mbit $delay2
+ tc -n $ns2 qdisc add dev ns2eth1 root netem rate ${rate1}mbit $delay1
+ tc -n $ns2 qdisc add dev ns2eth2 root netem rate ${rate2}mbit $delay2
+
+ # time is measure in ms
+ local time=$((size * 8 * 1000 / (( $rate1 + $rate2) * 1024 *1024) ))
+
+ # mptcp_connect will do some sleeps to allow the mp_join handshake
+ # completion
+ time=$((time + 1350))
+
+ printf "%-50s" "$msg"
+ do_transfer $small $large $((time * 11 / 10))
+ lret=$?
+ if [ $lret -ne 0 ]; then
+ ret=$lret
+ [ $bail -eq 0 ] || exit $ret
+ fi
+
+ printf "%-50s" "$msg - reverse direction"
+ do_transfer $large $small $((time * 11 / 10))
+ lret=$?
+ if [ $lret -ne 0 ]; then
+ ret=$lret
+ [ $bail -eq 0 ] || exit $ret
+ fi
+}
+
+while getopts "bcdh" option;do
+ case "$option" in
+ "h")
+ usage $0
+ exit 0
+ ;;
+ "b")
+ bail=1
+ ;;
+ "c")
+ capture=true
+ ;;
+ "d")
+ set -x
+ ;;
+ "?")
+ usage $0
+ exit 1
+ ;;
+ esac
+done
+
+setup
+run_test 10 10 0 0 "balanced bwidth"
+run_test 10 10 1 50 "balanced bwidth with unbalanced delay"
+
+# we still need some additional infrastructure to pass the following test-cases
+# run_test 30 10 0 0 "unbalanced bwidth"
+# run_test 30 10 1 50 "unbalanced bwidth with unbalanced delay"
+# run_test 30 10 50 1 "unbalanced bwidth with opposed, unbalanced delay"
+exit $ret
Add a bunch of test-cases for multiple subflow xmit: create multiple subflows simulating different links condition via netem and verify that the msk is able to use completely the aggregated bandwidth. Signed-off-by: Paolo Abeni <pabeni@redhat.com> --- tools/testing/selftests/net/mptcp/Makefile | 3 +- .../selftests/net/mptcp/simult_flows.sh | 293 ++++++++++++++++++ 2 files changed, 295 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/mptcp/simult_flows.sh