diff mbox series

[03/12] dmaengine: coh901318: remove dma_slave_config direction usage

Message ID 20180911083536.16482-4-vkoul@kernel.org
State New
Headers show
Series dmaengine: remove usage of dma_slave_config direction | expand

Commit Message

Vinod Koul Sept. 11, 2018, 8:35 a.m. UTC 
dma_slave_config direction was marked as deprecated quite some
time back, remove the usage from this driver so that the field
can be removed

Signed-off-by: Vinod Koul <vkoul@kernel.org>

---

CC: Eric Anholt <eric@anholt.net>
CC: Linus Walleij <linus.walleij@linaro.org>

 drivers/dma/coh901318.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)

-- 
2.14.4
diff mbox series

Patch

diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index da74fd74636b..eebaba3d9e78 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -1306,6 +1306,7 @@  struct coh901318_chan {
 	unsigned long nbr_active_done;
 	unsigned long busy;
 
+	struct dma_slave_config config;
 	u32 addr;
 	u32 ctrl;
 
@@ -1402,6 +1403,10 @@  static inline struct coh901318_chan *to_coh901318_chan(struct dma_chan *chan)
 	return container_of(chan, struct coh901318_chan, chan);
 }
 
+static int coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
+					   struct dma_slave_config *config,
+					   enum dma_transfer_direction direction);
+
 static inline const struct coh901318_params *
 cohc_chan_param(struct coh901318_chan *cohc)
 {
@@ -2360,6 +2365,8 @@  coh901318_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 	if (lli == NULL)
 		goto err_dma_alloc;
 
+	coh901318_dma_set_runtimeconfig(chan, &cohc->config, direction);
+
 	/* initiate allocated lli list */
 	ret = coh901318_lli_fill_sg(&cohc->base->pool, lli, sgl, sg_len,
 				    cohc->addr,
@@ -2499,7 +2506,8 @@  static const struct burst_table burst_sizes[] = {
 };
 
 static int coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
-					   struct dma_slave_config *config)
+					   struct dma_slave_config *config,
+					   enum dma_transfer_direction direction)
 {
 	struct coh901318_chan *cohc = to_coh901318_chan(chan);
 	dma_addr_t addr;
@@ -2509,11 +2517,11 @@  static int coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
 	int i = 0;
 
 	/* We only support mem to per or per to mem transfers */
-	if (config->direction == DMA_DEV_TO_MEM) {
+	if (direction == DMA_DEV_TO_MEM) {
 		addr = config->src_addr;
 		addr_width = config->src_addr_width;
 		maxburst = config->src_maxburst;
-	} else if (config->direction == DMA_MEM_TO_DEV) {
+	} else if (direction == DMA_MEM_TO_DEV) {
 		addr = config->dst_addr;
 		addr_width = config->dst_addr_width;
 		maxburst = config->dst_maxburst;
@@ -2579,6 +2587,16 @@  static int coh901318_dma_set_runtimeconfig(struct dma_chan *chan,
 	return 0;
 }
 
+static int coh901318_dma_slave_config(struct dma_chan *chan,
+					   struct dma_slave_config *config)
+{
+	struct coh901318_chan *cohc = to_coh901318_chan(chan);
+
+	memcpy(&cohc->config, config, sizeof(*config));
+
+	return 0;
+}
+
 static void coh901318_base_init(struct dma_device *dma, const int *pick_chans,
 				struct coh901318_base *base)
 {
@@ -2684,7 +2702,7 @@  static int __init coh901318_probe(struct platform_device *pdev)
 	base->dma_slave.device_prep_slave_sg = coh901318_prep_slave_sg;
 	base->dma_slave.device_tx_status = coh901318_tx_status;
 	base->dma_slave.device_issue_pending = coh901318_issue_pending;
-	base->dma_slave.device_config = coh901318_dma_set_runtimeconfig;
+	base->dma_slave.device_config = coh901318_dma_slave_config;
 	base->dma_slave.device_pause = coh901318_pause;
 	base->dma_slave.device_resume = coh901318_resume;
 	base->dma_slave.device_terminate_all = coh901318_terminate_all;
@@ -2707,7 +2725,7 @@  static int __init coh901318_probe(struct platform_device *pdev)
 	base->dma_memcpy.device_prep_dma_memcpy = coh901318_prep_memcpy;
 	base->dma_memcpy.device_tx_status = coh901318_tx_status;
 	base->dma_memcpy.device_issue_pending = coh901318_issue_pending;
-	base->dma_memcpy.device_config = coh901318_dma_set_runtimeconfig;
+	base->dma_memcpy.device_config = coh901318_dma_slave_config;
 	base->dma_memcpy.device_pause = coh901318_pause;
 	base->dma_memcpy.device_resume = coh901318_resume;
 	base->dma_memcpy.device_terminate_all = coh901318_terminate_all;