From patchwork Thu Sep 27 20:08:18 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mathieu Poirier X-Patchwork-Id: 11774 Return-Path: X-Original-To: patchwork@peony.canonical.com Delivered-To: patchwork@peony.canonical.com Received: from fiordland.canonical.com (fiordland.canonical.com [91.189.94.145]) by peony.canonical.com (Postfix) with ESMTP id D444A24140 for ; Thu, 27 Sep 2012 20:09:23 +0000 (UTC) Received: from mail-ie0-f180.google.com (mail-ie0-f180.google.com [209.85.223.180]) by fiordland.canonical.com (Postfix) with ESMTP id 6F311A18968 for ; Thu, 27 Sep 2012 20:09:23 +0000 (UTC) Received: by ieje10 with SMTP id e10so5234855iej.11 for ; Thu, 27 Sep 2012 13:09:22 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=x-forwarded-to:x-forwarded-for:delivered-to:received-spf:from:to :subject:date:message-id:x-mailer:in-reply-to:references :x-gm-message-state; bh=IuJO3kXqOGSQW9FdkxXUGFgQo+GvoI7HxcUFSJFrBgo=; b=KwS64Hcey31n43W7ep7vCVbm/uWM2Q2BMQsFASPzku7IIV/cc5fLAMBda7HaI6H1AN OaiSCs+pfMa4JPIC4N1cqRo8sAnMaTyKBdE8uA3x5vi21oamIFAhosDb2mFN4vKdDQra HIeygsEPFtt3RmlrcCu1lAjqJUPzu1eTTCYoIbu5L7wu6k6ggZ0pgb/NI20XcpkRUJre hXLml6S3nzkorGFMeECGYdcnyeJPUB3pFWhVITHNElDCZk+cT4b5ZXtUXqXXseW0bXdv jJ3rA1w16HUaLLDR9fyb9wRuB7NHs554vjaG9Bs0wIEyrC5oBQSuHRx4dBqv5pBryfym Nm2A== Received: by 10.42.109.194 with SMTP id m2mr3830474icp.48.1348776562726; Thu, 27 Sep 2012 13:09:22 -0700 (PDT) X-Forwarded-To: linaro-patchwork@canonical.com X-Forwarded-For: patch@linaro.org linaro-patchwork@canonical.com Delivered-To: patches@linaro.org Received: by 10.50.184.232 with SMTP id ex8csp436260igc; Thu, 27 Sep 2012 13:09:22 -0700 (PDT) Received: by 10.66.85.233 with SMTP id k9mr11910727paz.73.1348776561971; Thu, 27 Sep 2012 13:09:21 -0700 (PDT) Received: from mail-pb0-f50.google.com (mail-pb0-f50.google.com [209.85.160.50]) by mx.google.com with ESMTPS id pi9si5467641pbb.12.2012.09.27.13.09.21 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 27 Sep 2012 13:09:21 -0700 (PDT) Received-SPF: neutral (google.com: 209.85.160.50 is neither permitted nor denied by best guess record for domain of mathieu.poirier@linaro.org) client-ip=209.85.160.50; Authentication-Results: mx.google.com; spf=neutral (google.com: 209.85.160.50 is neither permitted nor denied by best guess record for domain of mathieu.poirier@linaro.org) smtp.mail=mathieu.poirier@linaro.org Received: by pbcmd4 with SMTP id md4so1686045pbc.37 for ; Thu, 27 Sep 2012 13:09:21 -0700 (PDT) Received: by 10.68.191.168 with SMTP id gz8mr10227750pbc.128.1348776561600; Thu, 27 Sep 2012 13:09:21 -0700 (PDT) Received: from localhost.localdomain (S0106002369de4dac.cg.shawcable.net. [70.73.24.112]) by mx.google.com with ESMTPS id sa2sm1587890pbc.4.2012.09.27.13.09.20 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 27 Sep 2012 13:09:20 -0700 (PDT) From: mathieu.poirier@linaro.org To: patches@linaro.org Subject: [PATCH 01/57] power: ab8500_bm: Charger current step-up/down Date: Thu, 27 Sep 2012 14:08:18 -0600 Message-Id: <1348776554-10019-2-git-send-email-mathieu.poirier@linaro.org> X-Mailer: git-send-email 1.7.5.4 In-Reply-To: <1348776554-10019-1-git-send-email-mathieu.poirier@linaro.org> References: <1348776554-10019-1-git-send-email-mathieu.poirier@linaro.org> X-Gm-Message-State: ALoCoQmqnCC0y/TRp8ZycNQN2bmxzd0lbqNEgmAH2tfq8f8CwMUTqTW/c2YO6Mb3dMYvKzdDfl5S From: Johan Bjornstedt There is no state machine in the AB to step up/down the charger current to avoid dips and spikes on VBUS and VBAT when charging is started. Instead this is implemented in SW Signed-off-by: Johan Bjornstedt Signed-off-by: Mattias Wallin Signed-off-by: Mathieu Poirier Reviewed-by: Karl KOMIEROWSKI --- drivers/power/ab8500_charger.c | 172 +++++++++++++++++++++++++++++++--------- 1 files changed, 133 insertions(+), 39 deletions(-) diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c index d4f0c98..3ceb788 100644 --- a/drivers/power/ab8500_charger.c +++ b/drivers/power/ab8500_charger.c @@ -77,6 +77,9 @@ /* Lowest charger voltage is 3.39V -> 0x4E */ #define LOW_VOLT_REG 0x4E +/* Step up/down delay in us */ +#define STEP_UDELAY 1000 + /* UsbLineStatus register - usb types */ enum ab8500_charger_link_status { USB_STAT_NOT_CONFIGURED, @@ -934,6 +937,88 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) } /** + * ab8500_charger_set_current() - set charger current + * @di: pointer to the ab8500_charger structure + * @ich: charger current, in mA + * @reg: select what charger register to set + * + * Set charger current. + * There is no state machine in the AB to step up/down the charger + * current to avoid dips and spikes on MAIN, VBUS and VBAT when + * charging is started. Instead we need to implement + * this charger current step-up/down here. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_current(struct ab8500_charger *di, + int ich, int reg) +{ + int ret, i; + int curr_index, prev_curr_index, shift_value; + u8 reg_value; + + switch (reg) { + case AB8500_MCH_IPT_CURLVL_REG: + shift_value = MAIN_CH_INPUT_CURR_SHIFT; + curr_index = ab8500_current_to_regval(ich); + break; + case AB8500_USBCH_IPT_CRNTLVL_REG: + shift_value = VBUS_IN_CURR_LIM_SHIFT; + curr_index = ab8500_vbus_in_curr_to_regval(ich); + break; + case AB8500_CH_OPT_CRNTLVL_REG: + shift_value = 0; + curr_index = ab8500_current_to_regval(ich); + break; + default: + dev_err(di->dev, "%s current register not valid\n", __func__); + return -ENXIO; + } + + if (curr_index < 0) { + dev_err(di->dev, "requested current limit out-of-range\n"); + return -ENXIO; + } + + ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER, + reg, ®_value); + if (ret < 0) { + dev_err(di->dev, "%s read failed\n", __func__); + return ret; + } + prev_curr_index = (reg_value >> shift_value); + + /* only update current if it's been changed */ + if (prev_curr_index == curr_index) + return 0; + + dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n", + __func__, ich, reg); + + if (prev_curr_index > curr_index) { + for (i = prev_curr_index - 1; i >= curr_index; i--) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8) i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + usleep_range(STEP_UDELAY, STEP_UDELAY * 2); + } + } else { + for (i = prev_curr_index + 1; i <= curr_index; i++) { + ret = abx500_set_register_interruptible(di->dev, + AB8500_CHARGER, reg, (u8) i << shift_value); + if (ret) { + dev_err(di->dev, "%s write failed\n", __func__); + return ret; + } + usleep_range(STEP_UDELAY, STEP_UDELAY * 2); + } + } + return ret; +} + +/** * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit * @di: pointer to the ab8500_charger structure * @ich_in: charger input current limit @@ -944,8 +1029,6 @@ static int ab8500_charger_get_usb_cur(struct ab8500_charger *di) static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, int ich_in) { - int ret; - int input_curr_index; int min_value; /* We should always use to lowest current limit */ @@ -964,19 +1047,38 @@ static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di, break; } - input_curr_index = ab8500_vbus_in_curr_to_regval(min_value); - if (input_curr_index < 0) { - dev_err(di->dev, "VBUS input current limit too high\n"); - return -ENXIO; - } + return ab8500_charger_set_current(di, min_value, + AB8500_USBCH_IPT_CRNTLVL_REG); +} - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_USBCH_IPT_CRNTLVL_REG, - input_curr_index << VBUS_IN_CURR_LIM_SHIFT); - if (ret) - dev_err(di->dev, "%s write failed\n", __func__); +/** + * ab8500_charger_set_main_in_curr() - set main charger input current + * @di: pointer to the ab8500_charger structure + * @ich_in: input charger current, in mA + * + * Set main charger input current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di, + int ich_in) +{ + return ab8500_charger_set_current(di, ich_in, + AB8500_MCH_IPT_CURLVL_REG); +} - return ret; +/** + * ab8500_charger_set_output_curr() - set charger output current + * @di: pointer to the ab8500_charger structure + * @ich_out: output charger current, in mA + * + * Set charger output current. + * Returns error code in case of failure else 0(on success) + */ +static int ab8500_charger_set_output_curr(struct ab8500_charger *di, + int ich_out) +{ + return ab8500_charger_set_current(di, ich_out, + AB8500_CH_OPT_CRNTLVL_REG); } /** @@ -1088,18 +1190,18 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, return ret; } /* MainChInputCurr: current that can be drawn from the charger*/ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_MCH_IPT_CURLVL_REG, - input_curr_index << MAIN_CH_INPUT_CURR_SHIFT); + ret = ab8500_charger_set_main_in_curr(di, + di->bat->chg_params->ac_curr_max); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, "%s Failed to set MainChInputCurr\n", + __func__); return ret; } /* ChOutputCurentLevel: protected output current */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, iset); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, + "%s Failed to set ChOutputCurentLevel\n", __func__); return ret; } @@ -1156,12 +1258,11 @@ static int ab8500_charger_ac_en(struct ux500_charger *charger, return ret; } - ret = abx500_set_register_interruptible(di->dev, - AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1); + ret = ab8500_charger_set_output_curr(di, 0); if (ret) { dev_err(di->dev, - "%s write failed\n", __func__); + "%s Failed to set ChOutputCurentLevel\n", + __func__); return ret; } } else { @@ -1264,10 +1365,11 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger, return ret; } /* ChOutputCurentLevel: protected output current */ - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, ich_out); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, + "%s Failed to set ChOutputCurentLevel\n", + __func__); return ret; } /* Check if VBAT overshoot control should be enabled */ @@ -1364,7 +1466,6 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, int ich_out) { int ret; - int curr_index; struct ab8500_charger *di; if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS) @@ -1374,18 +1475,11 @@ static int ab8500_charger_update_charger_current(struct ux500_charger *charger, else return -ENXIO; - curr_index = ab8500_current_to_regval(ich_out); - if (curr_index < 0) { - dev_err(di->dev, - "Charger current too high, " - "charging not started\n"); - return -ENXIO; - } - - ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER, - AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index); + ret = ab8500_charger_set_output_curr(di, ich_out); if (ret) { - dev_err(di->dev, "%s write failed\n", __func__); + dev_err(di->dev, + "%s Failed to set ChOutputCurentLevel\n", + __func__); return ret; }