@@ -25,6 +25,7 @@
/* Needed early for CONFIG_BSD etc. */
#include "qemu/osdep.h"
#include "qemu-common.h"
+#include "qemu/config-file.h"
#include "cpu.h"
#include "monitor/monitor.h"
#include "qapi/qmp/qerror.h"
@@ -45,6 +46,7 @@
#include "qemu/main-loop.h"
#include "qemu/bitmap.h"
#include "qemu/seqlock.h"
+#include "tcg.h"
#include "qapi-event.h"
#include "hw/nmi.h"
#include "sysemu/replay.h"
@@ -150,6 +152,77 @@ typedef struct TimersState {
} TimersState;
static TimersState timers_state;
+bool mttcg_enabled;
+
+/*
+ * We default to false if we know other options have been enabled
+ * which are currently incompatible with MTTCG. Otherwise when each
+ * guest (target) has been updated to support:
+ * - atomic instructions
+ * - memory ordering primitives (barriers)
+ * they can set the appropriate CONFIG flags in ${target}-softmmu.mak
+ *
+ * Once a guest architecture has been converted to the new primitives
+ * there are two remaining limitations to check.
+ *
+ * - The guest can't be oversized (e.g. 64 bit guest on 32 bit host)
+ * - The host must have a stronger memory order than the guest
+ *
+ * It may be possible in future to support strong guests on weak hosts
+ * but that will require tagging all load/stores in a guest with their
+ * implicit memory order requirements which would likely slow things
+ * down a lot.
+ */
+
+static bool check_tcg_memory_orders_compatible(void)
+{
+#if defined(TCG_GUEST_DEFAULT_MO) && defined(TCG_TARGET_DEFAULT_MO)
+ return (TCG_GUEST_DEFAULT_MO & ~TCG_TARGET_DEFAULT_MO) == 0;
+#else
+ return false;
+#endif
+}
+
+static bool default_mttcg_enabled(void)
+{
+ QemuOpts *icount_opts = qemu_find_opts_singleton("icount");
+ const char *rr = qemu_opt_get(icount_opts, "rr");
+
+ if (rr || TCG_OVERSIZED_GUEST) {
+ return false;
+ } else {
+#ifdef TARGET_SUPPORTS_MTTCG
+ return check_tcg_memory_orders_compatible();
+#else
+ return false;
+#endif
+ }
+}
+
+void qemu_tcg_configure(QemuOpts *opts, Error **errp)
+{
+ const char *t = qemu_opt_get(opts, "thread");
+ if (t) {
+ if (strcmp(t, "multi") == 0) {
+ if (TCG_OVERSIZED_GUEST) {
+ error_setg(errp, "No MTTCG when guest word size > hosts");
+ } else {
+ if (!check_tcg_memory_orders_compatible()) {
+ error_report("Guest expects a stronger memory ordering than"
+ "the host provides");
+ error_printf("This may cause strange/hard to debug errors");
+ }
+ mttcg_enabled = true;
+ }
+ } else if (strcmp(t, "single") == 0) {
+ mttcg_enabled = false;
+ } else {
+ error_setg(errp, "Invalid 'thread' setting %s", t);
+ }
+ } else {
+ mttcg_enabled = default_mttcg_enabled();
+ }
+}
int64_t cpu_get_icount_raw(void)
{
@@ -415,6 +415,15 @@ extern struct CPUTailQ cpus;
extern __thread CPUState *current_cpu;
/**
+ * qemu_tcg_mttcg_enabled:
+ * Check whether we are running MultiThread TCG or not.
+ *
+ * Returns: %true if we are in MTTCG mode %false otherwise.
+ */
+extern bool mttcg_enabled;
+#define qemu_tcg_mttcg_enabled() (mttcg_enabled)
+
+/**
* cpu_paging_enabled:
* @cpu: The CPU whose state is to be inspected.
*
@@ -36,4 +36,6 @@ extern int smp_threads;
void list_cpus(FILE *f, fprintf_function cpu_fprintf, const char *optarg);
+void qemu_tcg_configure(QemuOpts *opts, Error **errp);
+
#endif
@@ -95,6 +95,26 @@ STEXI
Select CPU model (@code{-cpu help} for list and additional feature selection)
ETEXI
+DEF("accel", HAS_ARG, QEMU_OPTION_accel,
+ "-accel [accel=]accelerator[,thread=single|multi]\n"
+ " select accelerator ('-accel help for list')\n"
+ " thread=single|multi (enable multi-threaded TCG)", QEMU_ARCH_ALL)
+STEXI
+@item -accel @var{name}[,prop=@var{value}[,...]]
+@findex -accel
+This is used to enable an accelerator. Depending on the target architecture,
+kvm, xen, or tcg can be available. By default, tcg is used. If there is more
+than one accelerator specified, the next one is used if the previous one fails
+to initialize.
+@table @option
+@item thread=single|multi
+Controls number of TCG threads. When the TCG is multi-threaded there will be one
+thread per vCPU therefor taking advantage of additional host cores. The default
+is to enable multi-threading where both the back-end and front-ends support it and
+no incompatible TCG features have been enabled (e.g. icount/replay).
+@end table
+ETEXI
+
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
"-smp [cpus=]n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets]\n"
" set the number of CPUs to 'n' [default=1]\n"
@@ -80,6 +80,15 @@ typedef uint64_t tcg_target_ulong;
#error unsupported
#endif
+/* Oversized TCG guests make things like MTTCG hard
+ * as we can't use atomics for cputlb updates.
+ */
+#if TARGET_LONG_BITS > TCG_TARGET_REG_BITS
+#define TCG_OVERSIZED_GUEST 1
+#else
+#define TCG_OVERSIZED_GUEST 0
+#endif
+
#if TCG_TARGET_NB_REGS <= 32
typedef uint32_t TCGRegSet;
#elif TCG_TARGET_NB_REGS <= 64
@@ -299,6 +299,26 @@ static QemuOptsList qemu_machine_opts = {
},
};
+static QemuOptsList qemu_accel_opts = {
+ .name = "accel",
+ .implied_opt_name = "accel",
+ .head = QTAILQ_HEAD_INITIALIZER(qemu_accel_opts.head),
+ .merge_lists = true,
+ .desc = {
+ {
+ .name = "accel",
+ .type = QEMU_OPT_STRING,
+ .help = "Select the type of accelerator",
+ },
+ {
+ .name = "thread",
+ .type = QEMU_OPT_STRING,
+ .help = "Enable/disable multi-threaded TCG",
+ },
+ { /* end of list */ }
+ },
+};
+
static QemuOptsList qemu_boot_opts = {
.name = "boot-opts",
.implied_opt_name = "order",
@@ -2939,7 +2959,8 @@ int main(int argc, char **argv, char **envp)
const char *boot_once = NULL;
DisplayState *ds;
int cyls, heads, secs, translation;
- QemuOpts *hda_opts = NULL, *opts, *machine_opts, *icount_opts = NULL;
+ QemuOpts *opts, *machine_opts;
+ QemuOpts *hda_opts = NULL, *icount_opts = NULL, *accel_opts = NULL;
QemuOptsList *olist;
int optind;
const char *optarg;
@@ -2994,6 +3015,7 @@ int main(int argc, char **argv, char **envp)
qemu_add_opts(&qemu_trace_opts);
qemu_add_opts(&qemu_option_rom_opts);
qemu_add_opts(&qemu_machine_opts);
+ qemu_add_opts(&qemu_accel_opts);
qemu_add_opts(&qemu_mem_opts);
qemu_add_opts(&qemu_smp_opts);
qemu_add_opts(&qemu_boot_opts);
@@ -3686,6 +3708,26 @@ int main(int argc, char **argv, char **envp)
qdev_prop_register_global(&kvm_pit_lost_tick_policy);
break;
}
+ case QEMU_OPTION_accel:
+ accel_opts = qemu_opts_parse_noisily(qemu_find_opts("accel"),
+ optarg, true);
+ optarg = qemu_opt_get(accel_opts, "accel");
+
+ olist = qemu_find_opts("machine");
+ if (strcmp("kvm", optarg) == 0) {
+ qemu_opts_parse_noisily(olist, "accel=kvm", false);
+ } else if (strcmp("xen", optarg) == 0) {
+ qemu_opts_parse_noisily(olist, "accel=xen", false);
+ } else if (strcmp("tcg", optarg) == 0) {
+ qemu_opts_parse_noisily(olist, "accel=tcg", false);
+ } else {
+ if (!is_help_option(optarg)) {
+ error_printf("Unknown accelerator: %s", optarg);
+ }
+ error_printf("Supported accelerators: kvm, xen, tcg\n");
+ exit(1);
+ }
+ break;
case QEMU_OPTION_usb:
olist = qemu_find_opts("machine");
qemu_opts_parse_noisily(olist, "usb=on", false);
@@ -3994,6 +4036,8 @@ int main(int argc, char **argv, char **envp)
replay_configure(icount_opts);
+ qemu_tcg_configure(accel_opts, &error_fatal);
+
machine_class = select_machine();
set_memory_options(&ram_slots, &maxram_size, machine_class);
@@ -4360,6 +4404,9 @@ int main(int argc, char **argv, char **envp)
if (!tcg_enabled()) {
error_report("-icount is not allowed with hardware virtualization");
exit(1);
+ } else if (qemu_tcg_mttcg_enabled()) {
+ error_report("-icount does not currently work with MTTCG");
+ exit(1);
}
configure_icount(icount_opts, &error_abort);
qemu_opts_del(icount_opts);