diff mbox series

[v4,4/4] hw/arm/bcm2835_peripherals: Correctly wire the SYS_timer IRQs

Message ID 20201010203709.3116542-5-f4bug@amsat.org
State Superseded
Headers show
Series hw/arm/raspi: Fix SYS_timer to unbrick Linux kernels v3.7+ | expand

Commit Message

Philippe Mathieu-Daudé Oct. 10, 2020, 8:37 p.m. UTC 
The SYS_timer is not directly wired to the ARM core, but to the
SoC (peripheral) interrupt controller.

Fixes: 0e5bbd74064 ("hw/arm/bcm2835_peripherals: Use the SYS_timer")
Reviewed-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 hw/arm/bcm2835_peripherals.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 15c5c72e465..48909a43c32 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -171,8 +171,17 @@  static void bcm2835_peripherals_realize(DeviceState *dev, Error **errp)
     memory_region_add_subregion(&s->peri_mr, ST_OFFSET,
                 sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->systmr), 0));
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 0,
-        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_ARM_IRQ,
-                               INTERRUPT_ARM_TIMER));
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER0));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 1,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER1));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 2,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER2));
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->systmr), 3,
+        qdev_get_gpio_in_named(DEVICE(&s->ic), BCM2835_IC_GPU_IRQ,
+                               INTERRUPT_TIMER3));
 
     /* UART0 */
     qdev_prop_set_chr(DEVICE(&s->uart0), "chardev", serial_hd(0));