diff mbox series

[PULL,4/7] docs: Incorporate information in usb-storage.txt into rST manual

Message ID 20210729125044.3531457-5-kraxel@redhat.com
State New
Headers show
Series None | expand

Commit Message

Gerd Hoffmann July 29, 2021, 12:50 p.m. UTC 
From: Peter Maydell <peter.maydell@linaro.org>


We already have a section on USB in the rST manual; fold
the information in docs/usb-storage.txt into it.

We add 'format=raw' to the various -drive options in the code
examples, because QEMU will print warnings these days if you
omit it.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Message-Id: <20210728141457.14825-2-peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

---
 docs/usb-storage.txt        | 59 -------------------------------------
 MAINTAINERS                 |  2 +-
 docs/system/devices/usb.rst | 57 ++++++++++++++++++++++++++++++-----
 3 files changed, 51 insertions(+), 67 deletions(-)
 delete mode 100644 docs/usb-storage.txt

-- 
2.31.1
diff mbox series

Patch

diff --git a/docs/usb-storage.txt b/docs/usb-storage.txt
deleted file mode 100644
index 551af6f88bb1..000000000000
--- a/docs/usb-storage.txt
+++ /dev/null
@@ -1,59 +0,0 @@ 
-
-qemu usb storage emulation
---------------------------
-
-QEMU has three devices for usb storage emulation.
-
-Number one emulates the classic bulk-only transport protocol which is
-used by 99% of the usb sticks on the market today and is called
-"usb-storage".  Usage (hooking up to xhci, other host controllers work
-too):
-
-  qemu ${other_vm_args}                                \
-       -drive if=none,id=stick,file=/path/to/file.img  \
-       -device nec-usb-xhci,id=xhci                    \
-       -device usb-storage,bus=xhci.0,drive=stick
-
-
-Number two is the newer usb attached scsi transport.  This one doesn't
-automagically create a scsi disk, so you have to explicitly attach one
-manually.  Multiple logical units are supported.  Here is an example
-with tree logical units:
-
-  qemu ${other_vm_args}                                                \
-       -drive if=none,id=uas-disk1,file=/path/to/file1.img             \
-       -drive if=none,id=uas-disk2,file=/path/to/file2.img             \
-       -drive if=none,id=uas-cdrom,media=cdrom,file=/path/to/image.iso \
-       -device nec-usb-xhci,id=xhci                                    \
-       -device usb-uas,id=uas,bus=xhci.0                               \
-       -device scsi-hd,bus=uas.0,scsi-id=0,lun=0,drive=uas-disk1       \
-       -device scsi-hd,bus=uas.0,scsi-id=0,lun=1,drive=uas-disk2       \
-       -device scsi-cd,bus=uas.0,scsi-id=0,lun=5,drive=uas-cdrom
-
-
-Number three emulates the classic bulk-only transport protocol too.
-It's called "usb-bot".  It shares most code with "usb-storage", and
-the guest will not be able to see the difference.  The qemu command
-line interface is similar to usb-uas though, i.e. no automatic scsi
-disk creation.  It also features support for up to 16 LUNs.  The LUN
-numbers must be continuous, i.e. for three devices you must use 0+1+2.
-The 0+1+5 numbering from the "usb-uas" example isn't going to work
-with "usb-bot".
-
-Starting with qemu version 2.7 usb-bot and usb-uas devices can be
-hotplugged.  In the hotplug case they are added with "attached =
-false" so the guest will not see the device until the "attached"
-property is explicitly set to true.  That allows to attach one or more
-scsi devices before making the device visible to the guest, i.e. the
-workflow looks like this:
-
-   (1) device-add usb-bot,id=foo
-   (2) device-add scsi-{hd,cd},bus=foo.0,lun=0
-   (2b) optionally add more devices (luns 1 ... 15).
-   (3) scripts/qmp/qom-set foo.attached = true
-
-enjoy,
-  Gerd
-
---
-Gerd Hoffmann <kraxel@redhat.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index 42ac45c3e502..b1f8e82befc6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1836,7 +1836,7 @@  S: Maintained
 F: hw/usb/*
 F: stubs/usb-dev-stub.c
 F: tests/qtest/usb-*-test.c
-F: docs/usb2.txt
+F: docs/system/devices/usb.rst
 F: docs/usb-storage.txt
 F: include/hw/usb.h
 F: include/hw/usb/
diff --git a/docs/system/devices/usb.rst b/docs/system/devices/usb.rst
index eeab78dcfbee..7da142ecbb9f 100644
--- a/docs/system/devices/usb.rst
+++ b/docs/system/devices/usb.rst
@@ -28,17 +28,46 @@  option or the ``device_add`` monitor command. Available devices are:
 
 ``usb-storage,drive=drive_id``
    Mass storage device backed by drive_id (see the :ref:`disk images`
-   chapter in the System Emulation Users Guide)
+   chapter in the System Emulation Users Guide). This is the classic
+   bulk-only transport protocol used by 99% of USB sticks. This
+   example shows it connected to an XHCI USB controller and with
+   a drive backed by a raw format disk image:
+
+   .. parsed-literal::
+
+       |qemu_system| [...]                                   \\
+        -drive if=none,id=stick,format=raw,file=/path/to/file.img \\
+        -device nec-usb-xhci,id=xhci                              \\
+        -device usb-storage,bus=xhci.0,drive=stick
 
 ``usb-uas``
-   USB attached SCSI device, see
-   `usb-storage.txt <https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/usb-storage.txt>`__
-   for details
+   USB attached SCSI device. This does not create a SCSI disk, so
+   you need to explicitly create a ``scsi-hd`` or ``scsi-cd`` device
+   on the command line, as well as using the ``-drive`` option to
+   specify what those disks are backed by. One ``usb-uas`` device can
+   handle multiple logical units (disks). This example creates three
+   logical units: two disks and one cdrom drive:
+
+   .. parsed-literal::
+
+      |qemu_system| [...]                                         \\
+       -drive if=none,id=uas-disk1,format=raw,file=/path/to/file1.img  \\
+       -drive if=none,id=uas-disk2,format=raw,file=/path/to/file2.img  \\
+       -drive if=none,id=uas-cdrom,media=cdrom,format=raw,file=/path/to/image.iso \\
+       -device nec-usb-xhci,id=xhci                                    \\
+       -device usb-uas,id=uas,bus=xhci.0                               \\
+       -device scsi-hd,bus=uas.0,scsi-id=0,lun=0,drive=uas-disk1       \\
+       -device scsi-hd,bus=uas.0,scsi-id=0,lun=1,drive=uas-disk2       \\
+       -device scsi-cd,bus=uas.0,scsi-id=0,lun=5,drive=uas-cdrom
 
 ``usb-bot``
-   Bulk-only transport storage device, see
-   `usb-storage.txt <https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/usb-storage.txt>`__
-   for details here, too
+   Bulk-only transport storage device. This presents the guest with the
+   same USB bulk-only transport protocol interface as ``usb-storage``, but
+   the QEMU command line option works like ``usb-uas`` and does not
+   automatically create SCSI disks for you. ``usb-bot`` supports up to
+   16 LUNs. Unlike ``usb-uas``, the LUN numbers must be continuous,
+   i.e. for three devices you must use 0+1+2. The 0+1+5 numbering from the
+   ``usb-uas`` example above won't work with ``usb-bot``.
 
 ``usb-mtp,rootdir=dir``
    Media transfer protocol device, using dir as root of the file tree
@@ -84,6 +113,20 @@  option or the ``device_add`` monitor command. Available devices are:
 ``u2f-{emulated,passthru}``
    Universal Second Factor device
 
+Hotplugging USB storage
+~~~~~~~~~~~~~~~~~~~~~~~
+
+The ``usb-bot`` and ``usb-uas`` devices can be hotplugged.  In the hotplug
+case they are added with ``attached = false`` so the guest will not see
+the device until the ``attached`` property is explicitly set to true.
+That allows you to attach one or more scsi devices before making the
+device visible to the guest. The workflow looks like this:
+
+#. ``device-add usb-bot,id=foo``
+#. ``device-add scsi-{hd,cd},bus=foo.0,lun=0``
+#. optionally add more devices (luns 1 ... 15)
+#. ``scripts/qmp/qom-set foo.attached = true``
+
 .. _host_005fusb_005fdevices:
 
 Using host USB devices on a Linux host