@@ -569,6 +569,7 @@ static void tcg_out_movi_int(TCGContext *s, TCGType type, TCGReg ret,
tcg_target_long arg, TCGReg tbreg)
{
tcg_target_long tmp;
+ int sh, lo;
if (TCG_TARGET_REG_BITS == 64 && type == TCG_TYPE_I32) {
arg = (int32_t)arg;
@@ -591,6 +592,49 @@ static void tcg_out_movi_int(TCGContext *s, TCGType type, TCGReg ret,
return;
}
+ /*
+ * Load bitmasks with a right-shift. This is good for things
+ * like 0x0fff_ffff_ffff_fff0: ADDUI r,0,0xff00 + DSRL r,r,4.
+ * or similarly using LUI. For this to work, bit 31 must be set.
+ */
+ if (arg > 0 && (int32_t)arg < 0) {
+ sh = clz64(arg);
+ if (tcg_out_movi_one(s, ret, arg << sh)) {
+ tcg_out_dsrl(s, ret, ret, sh);
+ return;
+ }
+ }
+
+ /*
+ * Load slightly larger constants using left-shift.
+ * Limit this sequence to 3 insns to avoid too much expansion.
+ */
+ sh = ctz64(arg);
+ if (sh && tcg_out_movi_two(s, ret, arg >> sh)) {
+ tcg_out_dsll(s, ret, ret, sh);
+ return;
+ }
+
+ /*
+ * Load slightly larger constants using left-shift and add/or.
+ * Prefer addi with a negative immediate when that would produce
+ * a larger shift. For this to work, bits 15 and 16 must be set.
+ */
+ lo = arg & 0xffff;
+ if (lo) {
+ if ((arg & 0x18000) == 0x18000) {
+ lo = (int16_t)arg;
+ }
+ tmp = arg - lo;
+ sh = ctz64(tmp);
+ tmp >>= sh;
+ if (tcg_out_movi_one(s, ret, tmp)) {
+ tcg_out_dsll(s, ret, ret, sh);
+ tcg_out_opc_imm(s, lo < 0 ? OPC_DADDIU : OPC_ORI, ret, ret, lo);
+ return;
+ }
+ }
+
/* Otherwise, put 64-bit constants into the constant pool. */
tcg_out_movi_pool(s, ret, arg, tbreg);
}
These sequences are inexpensive to test. Maxing out at three insns results in the same space as a load plus the constant pool entry. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> --- tcg/mips/tcg-target.c.inc | 44 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+)