diff mbox series

[4.14,051/228] arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property

Message ID 20200820091610.165989878@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg KH Aug. 20, 2020, 9:20 a.m. UTC 
From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 1b6a1a162defe649c5599d661b58ac64bb6f31b6 ]

msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.

However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.

Change it to that instead.

Fixes: 143bb9ad85b7 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index 4cb0b58341432..69ba1d79bcd5d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -542,7 +542,7 @@  pinconf {
 				pins = "gpio63", "gpio64", "gpio65", "gpio66",
 				       "gpio67", "gpio68";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		cdc_pdm_lines_sus: pdm_lines_off {
@@ -571,7 +571,7 @@  pinconf {
 				pins = "gpio113", "gpio114", "gpio115",
 				       "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -599,7 +599,7 @@  pinmux {
 			pinconf {
 				pins = "gpio110";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 
@@ -625,7 +625,7 @@  pinmux {
 			pinconf {
 				pins = "gpio116";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_mclk_tlmm_lines_sus: mclk_lines_off {
@@ -653,7 +653,7 @@  pinconf {
 				pins = "gpio112", "gpio117", "gpio118",
 					"gpio119";
 				drive-strength = <8>;
-				bias-pull-none;
+				bias-disable;
 			};
 		};
 		ext_sec_tlmm_lines_sus: tlmm_lines_off {