[5.4,28/76] ARC: build: move symlink creation to arch/arc/Makefile to avoid race

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit c5e6ae563c802c4d828d42e134af64004db2e58c ]

If you run 'make uImage uImage.gz' with the parallel option, uImage.gz
will be created by two threads simultaneously.

This is because arch/arc/Makefile does not specify the dependency
between uImage and uImage.gz. Hence, GNU Make assumes they can be
built in parallel. One thread descends into arch/arc/boot/ to create
uImage, and another to create uImage.gz.

Please notice the same log is displayed twice in the following steps:

  $ export CROSS_COMPILE=<your-arc-compiler-prefix>
  $ make -s ARCH=arc defconfig
  $ make -j$(nproc) ARCH=arc uImage uImage.gz
  [ snip ]
    LD      vmlinux
    SORTTAB vmlinux
    SYSMAP  System.map
    OBJCOPY arch/arc/boot/vmlinux.bin
    OBJCOPY arch/arc/boot/vmlinux.bin
    GZIP    arch/arc/boot/vmlinux.bin.gz
    GZIP    arch/arc/boot/vmlinux.bin.gz
    UIMAGE  arch/arc/boot/uImage.gz
    UIMAGE  arch/arc/boot/uImage.gz
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2109376 Bytes = 2059.94 KiB = 2.01 MiB
  Load Address: 80000000
  Entry Point:  80004000
    Image arch/arc/boot/uImage is ready
  Image Name:   Linux-5.10.0-rc4-00003-g62f23044
  Created:      Sun Nov 22 02:52:26 2020
  Image Type:   ARC Linux Kernel Image (gzip compressed)
  Data Size:    2815455 Bytes = 2749.47 KiB = 2.69 MiB
  Load Address: 80000000
  Entry Point:  80004000

This is a race between the two threads trying to write to the same file
arch/arc/boot/uImage.gz. This is a potential problem that can generate
a broken file.

I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:
add boot image dependencies to not generate invalid images").

I highly recommend to avoid such build rules that cause a race condition.

Move the uImage rule to arch/arc/Makefile.

Another strangeness is that arch/arc/boot/Makefile compares the
timestamps between $(obj)/uImage and $(obj)/uImage.*:

  $(obj)/uImage: $(obj)/uImage.$(suffix-y)
          @ln -sf $(notdir $<) $@
          @echo '  Image $@ is ready'

This does not work as expected since $(obj)/uImage is a symlink.
The symlink should be created in a phony target rule.

I used $(kecho) instead of echo to suppress the message
'Image arch/arc/boot/uImage is ready' when the -s option is given.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/Makefile      | 13 ++++++++++++-
 arch/arc/boot/Makefile | 11 +----------
 2 files changed, 13 insertions(+), 11 deletions(-)