diff mbox series

[5.10,207/663] ata: ahci_brcm: Add back regulators management

Message ID 20210301161152.027900816@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH March 1, 2021, 4:07 p.m. UTC 
From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 10340f8d7b6dd54e616339c8ccb2f397133ebea0 ]

While reworking the resources management and departing from using
ahci_platform_enable_resources() which did not allow a proper step
separation like we need, we unfortunately lost the ability to control
AHCI regulators. This broke some Broadcom STB systems that do expect
regulators to be turned on to link up with attached hard drives.

Fixes: c0cdf2ac4b5b ("ata: ahci_brcm: Fix AHCI resources management")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/ahci_brcm.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/ata/ahci_brcm.c b/drivers/ata/ahci_brcm.c
index 49f7acbfcf01e..5b32df5d33adc 100644
--- a/drivers/ata/ahci_brcm.c
+++ b/drivers/ata/ahci_brcm.c
@@ -377,6 +377,10 @@  static int __maybe_unused brcm_ahci_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		goto out_disable_clks;
+
 	brcm_sata_init(priv);
 	brcm_sata_phys_enable(priv);
 	brcm_sata_alpm_init(hpriv);
@@ -406,6 +410,8 @@  out_disable_platform_phys:
 	ahci_platform_disable_phys(hpriv);
 out_disable_phys:
 	brcm_sata_phys_disable(priv);
+	ahci_platform_disable_regulators(hpriv);
+out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 	return ret;
 }
@@ -490,6 +496,10 @@  static int brcm_ahci_probe(struct platform_device *pdev)
 	if (ret)
 		goto out_reset;
 
+	ret = ahci_platform_enable_regulators(hpriv);
+	if (ret)
+		goto out_disable_clks;
+
 	/* Must be first so as to configure endianness including that
 	 * of the standard AHCI register space.
 	 */
@@ -499,7 +509,7 @@  static int brcm_ahci_probe(struct platform_device *pdev)
 	priv->port_mask = brcm_ahci_get_portmask(hpriv, priv);
 	if (!priv->port_mask) {
 		ret = -ENODEV;
-		goto out_disable_clks;
+		goto out_disable_regulators;
 	}
 
 	/* Must be done before ahci_platform_enable_phys() */
@@ -524,6 +534,8 @@  out_disable_platform_phys:
 	ahci_platform_disable_phys(hpriv);
 out_disable_phys:
 	brcm_sata_phys_disable(priv);
+out_disable_regulators:
+	ahci_platform_disable_regulators(hpriv);
 out_disable_clks:
 	ahci_platform_disable_clks(hpriv);
 out_reset: