diff mbox series

[5.14,304/432] arm64: dts: ls1046a: fix eeprom entries

Message ID 20210916155821.127124269@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

gregkh@linuxfoundation.org Sept. 16, 2021, 4 p.m. UTC 
From: Raag Jadav <raagjadav@gmail.com>

[ Upstream commit c1a6018d1839c9cb8f807dc863a50102a1a5c412 ]

ls1046afrwy and ls1046ardb boards have CAT24C04[1] and CAT24C05[2]
eeproms respectively. Both are 4Kb (512 bytes) in size,
and compatible with AT24C04[3].
Remove multi-address entries, as both the boards have a single chip each.

[1] https://www.onsemi.com/pdf/datasheet/cat24c01-d.pdf
[2] https://www.onsemi.com/pdf/datasheet/cat24c03-d.pdf
[3] https://ww1.microchip.com/downloads/en/DeviceDoc/doc0180.pdf

Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts | 8 +-------
 arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts  | 7 +------
 2 files changed, 2 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index db3d303093f6..6d22efbd645c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -83,15 +83,9 @@  rtc@51 {
 			};
 
 			eeprom@52 {
-				compatible = "atmel,24c512";
+				compatible = "onnn,cat24c04", "atmel,24c04";
 				reg = <0x52>;
 			};
-
-			eeprom@53 {
-				compatible = "atmel,24c512";
-				reg = <0x53>;
-			};
-
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 60acdf0b689e..7025aad8ae89 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -59,14 +59,9 @@  temp-sensor@4c {
 	};
 
 	eeprom@52 {
-		compatible = "atmel,24c512";
+		compatible = "onnn,cat24c05", "atmel,24c04";
 		reg = <0x52>;
 	};
-
-	eeprom@53 {
-		compatible = "atmel,24c512";
-		reg = <0x53>;
-	};
 };
 
 &i2c3 {