This patch set provides some enhancements for i.MX28 based XEA board.
The most notably one is the ethaddr setup for L2 switch based design and
the code to very early enable fec regulator.
Lukasz Majewski (5):
arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash
arm: xea: Provide function to set L2 switch 'local-mac-address'
property
arm: xea: config: Enable support for XEA board specific device tree
tweaks
arm: xea: spl: Add GPIO0_0 setup on spl_board_init
arm: xea: dts: Add 'fec-3v3' regulator properties to prevent
accidental disablement
arch/arm/dts/imx28-xea.dts | 2 ++
board/liebherr/xea/xea.c | 49 ++++++++++++++++++++++++++++++++++++-
configs/imx28_xea_defconfig | 3 +++
3 files changed, 53 insertions(+), 1 deletion(-)
This patch set provides some enhancements for i.MX28 based XEA board. The most notably one is the ethaddr setup for L2 switch based design and the code to very early enable fec regulator. Lukasz Majewski (5): arm: xea: defconfig: Define space for redundant envs in SPI-NOR flash arm: xea: Provide function to set L2 switch 'local-mac-address' property arm: xea: config: Enable support for XEA board specific device tree tweaks arm: xea: spl: Add GPIO0_0 setup on spl_board_init arm: xea: dts: Add 'fec-3v3' regulator properties to prevent accidental disablement arch/arm/dts/imx28-xea.dts | 2 ++ board/liebherr/xea/xea.c | 49 ++++++++++++++++++++++++++++++++++++- configs/imx28_xea_defconfig | 3 +++ 3 files changed, 53 insertions(+), 1 deletion(-)