Show patches with: Submitter = Rajeshwari Shinde       |    State = Action Required       |   409 patches
« 1 2 ... 2 3 4 5 »
Patch Series S/W/F Date Submitter Delegate State
[6/7,V4] EXYNOS5: Enable SPI --- 2012-08-02 Rajeshwari Shinde New
[5/7,V4] SPI: Add SPI Driver for EXYNOS. --- 2012-08-02 Rajeshwari Shinde New
[4/7,V4] EXYNOS5: Add base address for SPI. --- 2012-08-02 Rajeshwari Shinde New
[3/7,V4] EXYNOS: Add clock for SPI. --- 2012-08-02 Rajeshwari Shinde New
[2/7,V4] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-08-02 Rajeshwari Shinde New
[1/7,V4] EXYNOS5: Add pinmux support for SPI --- 2012-08-02 Rajeshwari Shinde New
[7/7,V3] Enable SPI booting. --- 2012-08-01 Rajeshwari Shinde New
[6/7,V3] EXYNOS5: Enable SPI --- 2012-08-01 Rajeshwari Shinde New
[5/7,V3] SPI: Add SPI Driver for EXYNOS. --- 2012-08-01 Rajeshwari Shinde New
[4/7,V3] EXYNOS5: Add base address for SPI. --- 2012-08-01 Rajeshwari Shinde New
[3/7,V3] EXYNOS: Add clock for SPI. --- 2012-08-01 Rajeshwari Shinde New
[2/7,V3] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-08-01 Rajeshwari Shinde New
[1/7,V3] EXYNOS5: Add pinmux support for SPI --- 2012-08-01 Rajeshwari Shinde New
[8/8,V2] EXYNOS5: Enable SPI booting. --- 2012-07-31 Rajeshwari Shinde New
[7/8,V2] EXYNOS5: Enable SPI --- 2012-07-31 Rajeshwari Shinde New
[6/8,V2] SPI: Add SPI Driver for EXYNOS. --- 2012-07-31 Rajeshwari Shinde New
[5/8] SPI: Add SPI slave mode flag --- 2012-07-31 Rajeshwari Shinde New
[4/8,V2] EXYNOS5: Add base address for SPI. --- 2012-07-31 Rajeshwari Shinde New
[3/8,V2] EXYNOS: Add clock for SPI. --- 2012-07-31 Rajeshwari Shinde New
[2/8,V2] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-07-31 Rajeshwari Shinde New
[1/8,V2] EXYNOS5: Add pinmux support for SPI --- 2012-07-31 Rajeshwari Shinde New
[8/8] EXYNOS5: Enable SPI booting. --- 2012-07-31 Rajeshwari Shinde New
[7/8] EXYNOS5: Enable SPI --- 2012-07-31 Rajeshwari Shinde New
[6/8] SPI: Add SPI Driver for EXYNOS. --- 2012-07-31 Rajeshwari Shinde New
[5/8] SPI: Add SPI slave mode flag --- 2012-07-31 Rajeshwari Shinde New
[4/8] EXYNOS5: Add base address for SPI. --- 2012-07-31 Rajeshwari Shinde New
[3/8] EXYNOS: Add clock for SPI. --- 2012-07-31 Rajeshwari Shinde New
[2/8] SPI: Add W25Q32 to Winbond SPI flash table --- 2012-07-31 Rajeshwari Shinde New
[1/8] EXYNOS5: Add pinmux support for SPI --- 2012-07-31 Rajeshwari Shinde New
[8/8,V6] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-07-19 Rajeshwari Shinde New
[7/8,V6] I2C: Add support for Multi channel --- 2012-07-19 Rajeshwari Shinde New
[6/8,V6] I2C: Modify the I2C driver for EXYNOS5 --- 2012-07-19 Rajeshwari Shinde New
[7/7,V5] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-07-05 Rajeshwari Shinde New
[6/7,V5] I2C: Add support for Multi channel --- 2012-07-05 Rajeshwari Shinde New
[5/7,V5] I2C: Modify the I2C driver for EXYNOS5 --- 2012-07-05 Rajeshwari Shinde New
[2/7,V5] EXYNOS: Add I2C base address. --- 2012-07-05 Rajeshwari Shinde New
[1/7,V5] EXYNOS: CLK: Add i2c clock --- 2012-07-05 Rajeshwari Shinde New
[06/10,V5] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde New
[05/10,V5] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-07-02 Rajeshwari Shinde New
[08/10,V4] EXYNOS5: CLOCK: Add BPLL support --- 2012-06-29 Rajeshwari Shinde New
[06/10,V4] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[05/10,V4] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[08/10,V3] EXYNOS5: CLOCK: Add BPLL support --- 2012-06-29 Rajeshwari Shinde New
[06/10,V3] Exynos5: DDR3: Add DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[05/10,V3] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-29 Rajeshwari Shinde New
[8/9,V2] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[7/9,V2] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[6/9,V2] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[5/9,V2] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[4/9,V2] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[8/9] EXYNOS5 : Modify pinnumx settings as per Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[7/9] EXYNOS5: CLOCK: Modify MPLL clock out for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[6/9] Exynos5: DDR3: Adding the DDR3 memory setup for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[5/9] EXYNOS5: CLOCK: Add clock support for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[4/9] EXYNOS5: CLOCK: define additional clock registers for Exynos5250 Rev 1.0 --- 2012-06-20 Rajeshwari Shinde New
[1/9] ARCH: SPL: Add parametric board initializer --- 2012-06-20 Rajeshwari Shinde New
[8/8,V4] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-19 Rajeshwari Shinde New
[7/8,V4] I2C: Add support for Multi channel --- 2012-06-19 Rajeshwari Shinde New
[6/8,V4] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-19 Rajeshwari Shinde New
[5/8,V4] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-19 Rajeshwari Shinde New
[2/8,V4] EXYNOS: Add I2C base address. --- 2012-06-19 Rajeshwari Shinde New
[1/8,V4] EXYNOS: CLK: Add i2c clock --- 2012-06-19 Rajeshwari Shinde New
[8/8,V3] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-19 Rajeshwari Shinde New
[7/8,V3] I2C: Add support for Multi channel --- 2012-06-19 Rajeshwari Shinde New
[6/8,V3] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-19 Rajeshwari Shinde New
[5/8,V3] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-19 Rajeshwari Shinde New
[2/8,V3] EXYNOS: Add I2C base address. --- 2012-06-19 Rajeshwari Shinde New
[1/8,V3] EXYNOS: CLK: Add i2c clock --- 2012-06-19 Rajeshwari Shinde New
[V2] MMC: DWMMC: Add DWMMC driver --- 2012-06-11 Rajeshwari Shinde New
[8/8,V2] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-06-07 Rajeshwari Shinde New
[7/8,V2] I2C: Add support for Multi channel --- 2012-06-07 Rajeshwari Shinde New
[6/8,V2] I2C: Modify the I2C driver for EXYNOS5 --- 2012-06-07 Rajeshwari Shinde New
[5/8,V2] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-06-07 Rajeshwari Shinde New
[2/8,V2] EXYNOS: Add I2C base address. --- 2012-06-07 Rajeshwari Shinde New
[1/8,V2] EXYNOS: CLK: Add i2c clock --- 2012-06-07 Rajeshwari Shinde New
[1/2,V5] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-05 Rajeshwari Shinde New
[2/2,V4] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V4] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[2/2,V3] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-06-01 Rajeshwari Shinde New
[1/2,V3] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-06-01 Rajeshwari Shinde New
[4/4] EXYNOS5: Enable support for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[3/4] EXYNOS: Add base address for MSHCI --- 2012-05-25 Rajeshwari Shinde New
[2/4] EXYNOS5: PINMUX: Add pinmux for SDMMC4 --- 2012-05-25 Rajeshwari Shinde New
[1/4] EXYNOS: MSHCI: Add clock for EXYNOS5 --- 2012-05-25 Rajeshwari Shinde New
MMC: MSHCI: Add MSHCI driver --- 2012-05-25 Rajeshwari Shinde New
[2/2,V2] PMIC: SMDK5250: Enable MAX77686 pmic chip --- 2012-05-23 Rajeshwari Shinde New
[2/2,V2] EXYNOS: SMDK5250: Enable the pinmux setup --- 2012-05-23 Rajeshwari Shinde New
[1/2,V2] EXYNOS5: PINMUX: Added default pinumx settings --- 2012-05-23 Rajeshwari Shinde New
PMIC: MAX77686: Add support for MAX77686 --- 2012-05-21 Rajeshwari Shinde New
[8/8] CONFIG: SMDK5250: I2C: Enable I2C --- 2012-05-18 Rajeshwari Shinde New
[7/8] I2C: Add support for Multi channel --- 2012-05-18 Rajeshwari Shinde New
[6/8] I2C: Modify the I2C driver for EXYNOS5 --- 2012-05-18 Rajeshwari Shinde New
[5/8] I2C: S3C24X0: Add offset to calculate next i2c channel base address --- 2012-05-18 Rajeshwari Shinde New
[3/8] EXYNOS: PINMUX: Add pinmux support for I2C --- 2012-05-18 Rajeshwari Shinde New
[2/8] EXYNOS: Add I2C base address. --- 2012-05-18 Rajeshwari Shinde New
[1/8] EXYNOS: CLK: Add i2c clock --- 2012-05-18 Rajeshwari Shinde New
[4/6,V3] EXYNOS: Add power Enable/Disable for USB-EHCI --- 2012-05-08 Rajeshwari Shinde New
[4/6,V2] Exynos5: Add power Enable/Disable for USB-EHCI --- 2012-05-04 Rajeshwari Shinde New
[3/6,V2] EXYNOS5 : USB: Set USB 2.0 HOST Link mode --- 2012-05-04 Rajeshwari Shinde New
[V3] USB: EXYNOS: Add ehci support --- 2012-05-04 Rajeshwari Shinde New
« 1 2 ... 2 3 4 5 »