diff mbox series

[2/3] spl: mmc: Move the eMMC boot part index to weak function

Message ID 1591698884-72174-2-git-send-email-ye.li@nxp.com
State New
Headers show
Series [1/3] misc: scu_api: Add SCFW API to get the index of boot container set | expand

Commit Message

Ye Li June 9, 2020, 10:34 a.m. UTC 
Move the default eMMC boot partition index used for SPL load to a weak
function. So we can override it in iMX8 specified codes.
Because on iMX8 when the emmc regular boot is from boot part0/1, ROM will
switch to the other boot part for secondary boot. So we can't directly
use the boot part index in PARTITION_CONFIG register, but have
to check the secondary boot for using correct boot partition.

Signed-off-by: Ye Li <ye.li at nxp.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>
---
 common/spl/spl_mmc.c | 35 ++++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index add2785..f2880cc 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -324,6 +324,27 @@  unsigned long __weak spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
 	return raw_sect;
 }
 
+int __weak spl_mmc_emmc_boot_partition(struct mmc *mmc)
+{
+	int part = 0;
+
+#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
+	part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
+#else
+	/*
+	 * We need to check what the partition is configured to.
+	 * 1 and 2 match up to boot0 / boot1 and 7 is user data
+	 * which is the first physical partition (0).
+	 */
+	part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
+
+	if (part == 7)
+		part = 0;
+#endif
+
+	return part;
+}
+
 int spl_mmc_load(struct spl_image_info *spl_image,
 		 struct spl_boot_device *bootdev,
 		 const char *filename,
@@ -355,19 +376,7 @@  int spl_mmc_load(struct spl_image_info *spl_image,
 	err = -EINVAL;
 	switch (boot_mode) {
 	case MMCSD_MODE_EMMCBOOT:
-#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
-		part = CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION;
-#else
-		/*
-		 * We need to check what the partition is configured to.
-		 * 1 and 2 match up to boot0 / boot1 and 7 is user data
-		 * which is the first physical partition (0).
-		 */
-		part = (mmc->part_config >> 3) & PART_ACCESS_MASK;
-
-		if (part == 7)
-			part = 0;
-#endif
+		part = spl_mmc_emmc_boot_partition(mmc);
 
 		if (CONFIG_IS_ENABLED(MMC_TINY))
 			err = mmc_switch_part(mmc, part);