diff mbox series

[v1,10/13] toradex: imx: enable BOOTCOUNT feature

Message ID 1592335211-5998-11-git-send-email-igor.opaniuk@gmail.com
State New
Headers show
Series This patch-series includes updates for Toradex modules: | expand

Commit Message

Igor Opaniuk June 16, 2020, 7:20 p.m. UTC 
From: Igor Opaniuk <igor.opaniuk at toradex.com>

This introduces automatic boot counter that increases after every
reset.After a power-on reset, it will be initialized with 1,
and each reboot will increment the value by 1. By default it's
disabled if bootlimit isn't set.

To enable this feature you have set bootcount limit ("bootlimit"),
alternate boot action ("altbootcmd") that will be performed if
the new value of bootcount exceeds the value of bootlimit, and
"upgrade_available" to let U-Boot automatically increase and save
the counter value after every reset:

> setenv bootlimit 5
> setenv upgrade_available 1
> setenv altbootcmd "bootm ..."

In case the bootlimit exceeds, the message will be shown and
albootcmd executed:
Warning: Bootlimit (5) exceeded. Using altbootcmd.

To reset bootcount run:
> bootcount reset

Print current value:
> bootcount print

Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---

 configs/apalis_imx6_defconfig       | 3 +++
 configs/colibri-imx6ull_defconfig   | 3 +++
 configs/colibri_imx6_defconfig      | 3 +++
 configs/colibri_imx7_defconfig      | 3 +++
 configs/colibri_imx7_emmc_defconfig | 3 +++
 5 files changed, 15 insertions(+)

Comments

Stefano Babic June 23, 2020, 7:51 a.m. UTC | #1 
> From: Igor Opaniuk <igor.opaniuk at toradex.com>
> This introduces automatic boot counter that increases after every
> reset.After a power-on reset, it will be initialized with 1,
> and each reboot will increment the value by 1. By default it's
> disabled if bootlimit isn't set.
> To enable this feature you have set bootcount limit ("bootlimit"),
> alternate boot action ("altbootcmd") that will be performed if
> the new value of bootcount exceeds the value of bootlimit, and
> "upgrade_available" to let U-Boot automatically increase and save
> the counter value after every reset:
> > setenv bootlimit 5
> > setenv upgrade_available 1
> > setenv altbootcmd "bootm ..."
> In case the bootlimit exceeds, the message will be shown and
> albootcmd executed:
> Warning: Bootlimit (5) exceeded. Using altbootcmd.
> To reset bootcount run:
> > bootcount reset
> Print current value:
> > bootcount print
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
diff mbox series

Patch

diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig
index 6b0f0e4..65162a2 100644
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@@ -53,6 +53,7 @@  CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_PMIC=y
@@ -65,6 +66,8 @@  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=4096
 CONFIG_DWC_AHSATA=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index 74a67a0..ce145cd 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -40,6 +40,7 @@  CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_MTDPARTS=y
@@ -54,6 +55,8 @@  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_DFU_NAND=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig
index 44a3ff8..ca33327 100644
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@@ -52,6 +52,7 @@  CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_NFS is not set
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_UUID=y
@@ -64,6 +65,8 @@  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_DM_I2C=y
 CONFIG_DM_MMC=y
 CONFIG_SUPPORT_EMMC_BOOT=y
diff --git a/configs/colibri_imx7_defconfig b/configs/colibri_imx7_defconfig
index 7596478..89ee6e5 100644
--- a/configs/colibri_imx7_defconfig
+++ b/configs/colibri_imx7_defconfig
@@ -40,6 +40,7 @@  CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_BOOTP_PXE is not set
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 # CONFIG_CMD_HASH is not set
 CONFIG_CMD_MTDPARTS=y
@@ -54,6 +55,8 @@  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_FSL_CAAM=y
 CONFIG_DFU_NAND=y
 CONFIG_DM_I2C=y
diff --git a/configs/colibri_imx7_emmc_defconfig b/configs/colibri_imx7_emmc_defconfig
index c23ff97..13a3aae 100644
--- a/configs/colibri_imx7_emmc_defconfig
+++ b/configs/colibri_imx7_emmc_defconfig
@@ -38,6 +38,7 @@  CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 # CONFIG_CMD_HASH is not set
 # CONFIG_ISO_PARTITION is not set
@@ -48,6 +49,8 @@  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_FSL_CAAM=y
 CONFIG_USB_FUNCTION_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x82000000