From patchwork Mon Jan 6 08:04:35 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peng Fan X-Patchwork-Id: 239133 List-Id: U-Boot discussion From: peng.fan at nxp.com (Peng Fan) Date: Mon, 6 Jan 2020 08:04:35 +0000 Subject: [PATCH 3/3] imx: imx8mn: enable CONFIG_CMD_ERASEENV In-Reply-To: <20200106082403.26268-1-peng.fan@nxp.com> References: <20200106082403.26268-1-peng.fan@nxp.com> Message-ID: <20200106082403.26268-3-peng.fan@nxp.com> enable CONFIG_CMD_ERASEENV to make it easy to erase env. Use savedefconfig to generate new defconfig. Signed-off-by: Peng Fan --- configs/imx8mn_ddr4_evk_defconfig | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index 50b03d0763..a63177e99d 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -7,12 +7,15 @@ CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x10000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_ENV_SIZE=0x1000 +CONFIG_ENV_OFFSET=0x400000 CONFIG_TARGET_IMX8MN_EVK=y CONFIG_SPL_MMC_SUPPORT=y CONFIG_SPL_SERIAL_SUPPORT=y CONFIG_SPL_DRIVERS_MISC_SUPPORT=y -CONFIG_ENV_SIZE=0x1000 -CONFIG_ENV_OFFSET=0x400000 CONFIG_SPL=y CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_SPL_TEXT_BASE=0x912000 @@ -32,6 +35,7 @@ CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot=> " # CONFIG_CMD_EXPORTENV is not set # CONFIG_CMD_IMPORTENV is not set +CONFIG_CMD_ERASEENV=y # CONFIG_CMD_CRC32 is not set CONFIG_CMD_CLK=y CONFIG_CMD_FUSE=y @@ -59,9 +63,6 @@ CONFIG_DM_GPIO=y CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y -CONFIG_SYS_I2C_MXC_I2C1=y -CONFIG_SYS_I2C_MXC_I2C2=y -CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DM_MMC=y CONFIG_SUPPORT_EMMC_BOOT=y CONFIG_FSL_ESDHC_IMX=y