From patchwork Mon Feb 3 16:09:23 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Fabio Estevam X-Patchwork-Id: 235874 List-Id: U-Boot discussion From: festevam at gmail.com (Fabio Estevam) Date: Mon, 3 Feb 2020 13:09:23 -0300 Subject: [PATCH 2/2] mx6ul_evk: Remove FEC related board code In-Reply-To: <20200203160923.23548-1-festevam@gmail.com> References: <20200203160923.23548-1-festevam@gmail.com> Message-ID: <20200203160923.23548-2-festevam@gmail.com> mx6ul_evk uses DM_ETH, so there is no need to have board code to setup the FEC IOMUX and to register the network ports via the old board_eth_init() method. Remove these FEC related pieces of code. Signed-off-by: Fabio Estevam Reviewed-by: Peng Fan --- .../mx6ul_14x14_evk/mx6ul_14x14_evk.c | 50 ------------------- 1 file changed, 50 deletions(-) diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c index 086e0e6739..6b87f5c1b0 100644 --- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c @@ -196,56 +196,6 @@ int board_ehci_hcd_init(int port) #endif #ifdef CONFIG_FEC_MXC -/* - * pin conflicts for fec1 and fec2, GPIO1_IO06 and GPIO1_IO07 can only - * be used for ENET1 or ENET2, cannot be used for both. - */ -static iomux_v3_cfg_t const fec1_pads[] = { - MX6_PAD_GPIO1_IO06__ENET1_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_GPIO1_IO07__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_DATA0__ENET1_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_DATA1__ENET1_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_EN__ENET1_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), - MX6_PAD_ENET1_RX_DATA0__ENET1_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_DATA1__ENET1_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_ER__ENET1_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET1_RX_EN__ENET1_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static iomux_v3_cfg_t const fec2_pads[] = { - MX6_PAD_GPIO1_IO06__ENET2_MDIO | MUX_PAD_CTRL(MDIO_PAD_CTRL), - MX6_PAD_GPIO1_IO07__ENET2_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - - MX6_PAD_ENET2_TX_DATA0__ENET2_TDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_DATA1__ENET2_TDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 | MUX_PAD_CTRL(ENET_CLK_PAD_CTRL), - MX6_PAD_ENET2_TX_EN__ENET2_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - - MX6_PAD_ENET2_RX_DATA0__ENET2_RDATA00 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_RX_DATA1__ENET2_RDATA01 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_RX_EN__ENET2_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET2_RX_ER__ENET2_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -static void setup_iomux_fec(int fec_id) -{ - if (fec_id == 0) - imx_iomux_v3_setup_multiple_pads(fec1_pads, - ARRAY_SIZE(fec1_pads)); - else - imx_iomux_v3_setup_multiple_pads(fec2_pads, - ARRAY_SIZE(fec2_pads)); -} - -int board_eth_init(bd_t *bis) -{ - setup_iomux_fec(CONFIG_FEC_ENET_DEV); - - return fecmxc_initialize_multi(bis, CONFIG_FEC_ENET_DEV, - CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); -} - static int setup_fec(int fec_id) { struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;