From patchwork Tue Feb 4 05:39:57 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vignesh Raghavendra X-Patchwork-Id: 235925 List-Id: U-Boot discussion From: vigneshr at ti.com (Vignesh Raghavendra) Date: Tue, 4 Feb 2020 11:09:57 +0530 Subject: [PATCH v2 10/12] board: ti: Update AM65x and J721e READMEs for OSPI boot In-Reply-To: <20200204053959.8802-1-vigneshr@ti.com> References: <20200204053959.8802-1-vigneshr@ti.com> Message-ID: <20200204053959.8802-11-vigneshr@ti.com> Update AM65x and J721e README files with instructions for flashing OSPI images. Signed-off-by: Vignesh Raghavendra --- board/ti/am65x/README | 55 +++++++++++++++++++++++++++++++++++++++++++ board/ti/j721e/README | 47 ++++++++++++++++++++++++++++++++++++ 2 files changed, 102 insertions(+) diff --git a/board/ti/am65x/README b/board/ti/am65x/README index 2e3fd9c4a810..86868e8c705f 100644 --- a/board/ti/am65x/README +++ b/board/ti/am65x/README @@ -262,6 +262,61 @@ To boot kernel from eMMC, use the following commands: => setenv bootpart 0 => boot +OSPI: +----- +ROM supports booting from OSPI from offset 0x0. + +Flashing images to OSPI: + +Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img, +and sysfw.itb over tftp and then flash those to OSPI at their respective +addresses. + +=> sf probe +=> tftp ${loadaddr} tiboot3.bin +=> sf update $loadaddr 0x0 $filesize +=> tftp ${loadaddr} tispl.bin +=> sf update $loadaddr 0x80000 $filesize +=> tftp ${loadaddr} u-boot.img +=> sf update $loadaddr 0x280000 $filesize +=> tftp ${loadaddr} sysfw.itb +=> sf update $loadaddr 0x6C0000 $filesize + +Flash layout for OSPI: + + 0x0 +----------------------------+ + | ospi.tiboot3(512K) | + | | + 0x80000 +----------------------------+ + | ospi.tispl(2M) | + | | + 0x280000 +----------------------------+ + | ospi.u-boot(4M) | + | | + 0x680000 +----------------------------+ + | ospi.env(128K) | + | | + 0x6A0000 +----------------------------+ + | ospi.env.backup (128K) | + | | + 0x6C0000 +----------------------------+ + | ospi.sysfw(1M) | + | | + 0x7C0000 +----------------------------+ + | padding (256k) | + 0x800000 +----------------------------+ + | ospi.rootfs(UBIFS) | + | | + +----------------------------+ + +Kernel Image and DT are expected to be present in the /boot folder of UBIFS +ospi.rootfs just like in SD card case. U-Boot looks for UBI volume named +"rootfs" for rootfs. + +To boot kernel from OSPI, at the U-Boot prompt: +=> setenv boot ubi +=> boot + UART: ----- ROM supports booting from MCU_UART0 via X-Modem protocol. The entire UART-based diff --git a/board/ti/j721e/README b/board/ti/j721e/README index 5be7d099db96..739d4933fcf3 100644 --- a/board/ti/j721e/README +++ b/board/ti/j721e/README @@ -225,3 +225,50 @@ Image formats: | | Secure config | | | +-------------------+ | +-----------------------+ + +OSPI: +----- +ROM supports booting from OSPI from offset 0x0. + +Flashing images to OSPI: + +Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img, +and sysfw.itb over tftp and then flash those to OSPI at their respective +addresses. + +=> sf probe +=> tftp ${loadaddr} tiboot3.bin +=> sf update $loadaddr 0x0 $filesize +=> tftp ${loadaddr} tispl.bin +=> sf update $loadaddr 0x80000 $filesize +=> tftp ${loadaddr} u-boot.img +=> sf update $loadaddr 0x280000 $filesize +=> tftp ${loadaddr} sysfw.itb +=> sf update $loadaddr 0x6C0000 $filesize + +Flash layout for OSPI: + + 0x0 +----------------------------+ + | ospi.tiboot3(512K) | + | | + 0x80000 +----------------------------+ + | ospi.tispl(2M) | + | | + 0x280000 +----------------------------+ + | ospi.u-boot(4M) | + | | + 0x680000 +----------------------------+ + | ospi.env(128K) | + | | + 0x6A0000 +----------------------------+ + | ospi.env.backup (128K) | + | | + 0x6C0000 +----------------------------+ + | ospi.sysfw(1M) | + | | + 0x7C0000 +----------------------------+ + | padding (256k) | + 0x800000 +----------------------------+ + | ospi.rootfs(UBIFS) | + | | + +----------------------------+