From patchwork Wed Feb 12 15:14:31 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Igor Opaniuk X-Patchwork-Id: 236248 List-Id: U-Boot discussion From: igor.opaniuk at gmail.com (Igor Opaniuk) Date: Wed, 12 Feb 2020 17:14:31 +0200 Subject: [PATCH v5 4/6] doc: board: colibri-imx8x: convert readme to reST In-Reply-To: <20200212151433.9713-1-igor.opaniuk@gmail.com> References: <20200212151433.9713-1-igor.opaniuk@gmail.com> Message-ID: <20200212151433.9713-5-igor.opaniuk@gmail.com> From: Igor Opaniuk Convert README to reStructuredText format. Signed-off-by: Igor Opaniuk Reviewed-by: Oleksandr Suvorov Reviewed-by: Bin Meng Tested-by: Bin Meng --- board/toradex/colibri-imx8x/README | 66 ----------------------- doc/board/toradex/colibri-imx8x.rst | 82 +++++++++++++++++++++++++++++ doc/board/toradex/index.rst | 1 + 3 files changed, 83 insertions(+), 66 deletions(-) delete mode 100644 board/toradex/colibri-imx8x/README create mode 100644 doc/board/toradex/colibri-imx8x.rst diff --git a/board/toradex/colibri-imx8x/README b/board/toradex/colibri-imx8x/README deleted file mode 100644 index 708bb3e51c..0000000000 --- a/board/toradex/colibri-imx8x/README +++ /dev/null @@ -1,66 +0,0 @@ -U-Boot for the Toradex Colibri iMX8QXP V1.0B Module - -Quick Start -=========== - -- Build the ARM trusted firmware binary -- Get scfw_tcm.bin and ahab-container.img -- Build U-Boot -- Load U-Boot binary using uuu -- Flash U-Boot binary into the eMMC -- Boot - -Get and Build the ARM Trusted Firmware -====================================== - -$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf -$ cd imx-atf/ -$ make PLAT=imx8qxp bl31 - -Get scfw_tcm.bin and ahab-container.img -======================================= - -$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true -$ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin -$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin -$ chmod +x firmware-imx-8.0.bin -$ ./firmware-imx-8.0.bin - -Copy the following binaries to the U-Boot folder: - -$ cp imx-atf/build/imx8qxp/release/bl31.bin . -$ cp u-boot/u-boot.bin . - -Copy the following firmware to the U-Boot folder: - -$ cp firmware-imx-8.0/firmware/seco/ahab-container.img . - -Build U-Boot -============ - -$ make colibri-imx8qxp_defconfig -$ make u-boot-dtb.imx - -Load the U-Boot Binary Using UUU -================================ - -Get the latest version of the universal update utility (uuu) aka mfgtools 3.0: - -https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases - -Put the module into USB recovery aka serial downloader mode, connect USB device -to your host and execute uuu: - -sudo ./uuu u-boot/u-boot-dtb.imx - -Flash the U-Boot Binary into the eMMC -===================================== - -Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition: - -load mmc 1:1 $loadaddr u-boot-dtb.imx -setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 -mmc dev 0 1 -mmc write ${loadaddr} 0x0 ${blkcnt} - -Boot diff --git a/doc/board/toradex/colibri-imx8x.rst b/doc/board/toradex/colibri-imx8x.rst new file mode 100644 index 0000000000..244e5a4c04 --- /dev/null +++ b/doc/board/toradex/colibri-imx8x.rst @@ -0,0 +1,82 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Colibri iMX8QXP V1.0B Module +============================ + +Quick Start +----------- + +- Build the ARM trusted firmware binary +- Get scfw_tcm.bin and ahab-container.img +- Build U-Boot +- Load U-Boot binary using uuu +- Flash U-Boot binary into the eMMC +- Boot + +Get and Build the ARM Trusted Firmware +-------------------------------------- + +.. code-block:: bash + + $ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf + $ cd imx-atf/ + $ make PLAT=imx8qxp bl31 + +Get scfw_tcm.bin and ahab-container.img +--------------------------------------- +.. code-block:: bash + + $ wget https://github.com/toradex/meta-fsl-bsp-release/blob/ + toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes- + bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true + $ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin + $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin + $ chmod +x firmware-imx-8.0.bin + $ ./firmware-imx-8.0.bin + +Copy the following binaries to the U-Boot folder: + +.. code-block:: bash + + $ cp imx-atf/build/imx8qxp/release/bl31.bin . + $ cp u-boot/u-boot.bin . + +Copy the following firmware to the U-Boot folder: + +.. code-block:: bash + + $ cp firmware-imx-8.0/firmware/seco/ahab-container.img . + +Build U-Boot +------------ + +.. code-block:: bash + + $ make colibri-imx8qxp_defconfig + $ make u-boot-dtb.imx + +Load the U-Boot Binary Using UUU +-------------------------------- + +Get the latest version of the universal update utility (uuu) aka ``mfgtools 3.0``: + +https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases + +Put the module into USB recovery aka serial downloader mode, connect USB device +to your host and execute ``uuu``: + +.. code-block:: bash + + sudo ./uuu u-boot/u-boot-dtb.imx + +Flash the U-Boot Binary into the eMMC +------------------------------------- + +Burn the ``u-boot-dtb.imx`` binary to the primary eMMC hardware boot area partition: + +.. code-block:: bash + + load mmc 1:1 $loadaddr u-boot-dtb.imx + setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200 + mmc dev 0 1 + mmc write ${loadaddr} 0x0 ${blkcnt} diff --git a/doc/board/toradex/index.rst b/doc/board/toradex/index.rst index da65ad2408..16b5a0770d 100644 --- a/doc/board/toradex/index.rst +++ b/doc/board/toradex/index.rst @@ -8,4 +8,5 @@ Toradex apalix-imx8 colibri_imx7 + colibri-imx8x verdin-imx8mm