@@ -341,4 +341,45 @@ int acpi_device_write_i2c_dev(struct acpi_ctx *ctx, const struct udevice *dev);
*/
int acpi_device_write_spi_dev(struct acpi_ctx *ctx, const struct udevice *dev);
+/**
+ * acpi_device_add_power_res() - Add a basic PowerResource block for a device
+ *
+ * This includes GPIOs to control enable, reset and stop operation of the
+ * device. Each GPIO is optional, but at least one must be provided.
+ * This can be applied to any device that has power control, so is fairly
+ * generic.
+ *
+ * Reset - Put the device into / take the device out of reset.
+ * Enable - Enable / disable power to device.
+ * Stop - Stop / start operation of device.
+ *
+ * @ctx: ACPI context pointer
+ * @tx_state_val: Mask to use to toggle the TX state on the GPIO pin, e,g.
+ * PAD_CFG0_TX_STATE
+ * @dw0_name: Name to use for access to dw0, e.g. "\\_SB.GPC0"
+ * @reset_gpio: GPIO used to take device out of reset or to put it into reset
+ * @reset_delay_ms: Delay to be inserted after device is taken out of reset
+ * (_ON method delay)
+ * @reset_off_delay_ms: Delay to be inserted after device is put into reset
+ * (_OFF method delay)
+ * @enable_gpio: GPIO used to enable device
+ * @enable_delay_ms: Delay to be inserted after device is enabled
+ * @enable_off_delay_ms: Delay to be inserted after device is disabled
+ * (_OFF method delay)
+ * @stop_gpio: GPIO used to stop operation of device
+ * @stop_delay_ms: Delay to be inserted after disabling stop (_ON method delay)
+ * @stop_off_delay_ms: Delay to be inserted after enabling stop.
+ * (_OFF method delay)
+ *
+ * @return 0 if OK, -ve if at least one GPIO is not provided
+ */
+int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val,
+ const char *dw0_name,
+ const struct gpio_desc *reset_gpio,
+ uint reset_delay_ms, uint reset_off_delay_ms,
+ const struct gpio_desc *enable_gpio,
+ uint enable_delay_ms, uint enable_off_delay_ms,
+ const struct gpio_desc *stop_gpio,
+ uint stop_delay_ms, uint stop_off_delay_ms);
+
#endif
@@ -381,6 +381,105 @@ int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx,
return 0;
}
+/* PowerResource() with Enable and/or Reset control */
+int acpi_device_add_power_res(struct acpi_ctx *ctx, u32 tx_state_val,
+ const char *dw0_name,
+ const struct gpio_desc *reset_gpio,
+ uint reset_delay_ms, uint reset_off_delay_ms,
+ const struct gpio_desc *enable_gpio,
+ uint enable_delay_ms, uint enable_off_delay_ms,
+ const struct gpio_desc *stop_gpio,
+ uint stop_delay_ms, uint stop_off_delay_ms)
+{
+ static const char *const power_res_dev_states[] = { "_PR0", "_PR3" };
+ struct acpi_gpio reset, enable, stop;
+ bool has_reset, has_enable, has_stop;
+ int ret;
+
+ gpio_get_acpi(reset_gpio, &reset);
+ gpio_get_acpi(enable_gpio, &enable);
+ gpio_get_acpi(stop_gpio, &stop);
+ has_reset = reset.pins[0];
+ has_enable = enable.pins[0];
+ has_stop = stop.pins[0];
+
+ if (!has_reset && !has_enable && !has_stop)
+ return -EINVAL;
+
+ /* PowerResource (PRIC, 0, 0) */
+ acpigen_write_power_res(ctx, "PRIC", 0, 0, power_res_dev_states,
+ ARRAY_SIZE(power_res_dev_states));
+
+ /* Method (_STA, 0, NotSerialized) { Return (0x1) } */
+ acpigen_write_sta(ctx, 0x1);
+
+ /* Method (_ON, 0, Serialized) */
+ acpigen_write_method_serialized(ctx, "_ON", 0);
+ if (reset_gpio) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &reset, true);
+ if (ret)
+ return log_msg_ret("reset1", ret);
+ }
+ if (has_enable) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &enable, true);
+ if (ret)
+ return log_msg_ret("enable1", ret);
+ if (enable_delay_ms)
+ acpigen_write_sleep(ctx, enable_delay_ms);
+ }
+ if (has_reset) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &reset, false);
+ if (ret)
+ return log_msg_ret("reset2", ret);
+ if (reset_delay_ms)
+ acpigen_write_sleep(ctx, reset_delay_ms);
+ }
+ if (has_stop) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &stop, false);
+ if (ret)
+ return log_msg_ret("stop1", ret);
+ if (stop_delay_ms)
+ acpigen_write_sleep(ctx, stop_delay_ms);
+ }
+ acpigen_pop_len(ctx); /* _ON method */
+
+ /* Method (_OFF, 0, Serialized) */
+ acpigen_write_method_serialized(ctx, "_OFF", 0);
+ if (has_stop) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &stop, true);
+ if (ret)
+ return log_msg_ret("stop2", ret);
+ if (stop_off_delay_ms)
+ acpigen_write_sleep(ctx, stop_off_delay_ms);
+ }
+ if (has_reset) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &reset, true);
+ if (ret)
+ return log_msg_ret("reset3", ret);
+ if (reset_off_delay_ms)
+ acpigen_write_sleep(ctx, reset_off_delay_ms);
+ }
+ if (has_enable) {
+ ret = acpigen_set_enable_tx_gpio(ctx, tx_state_val, dw0_name,
+ &enable, false);
+ if (ret)
+ return log_msg_ret("enable2", ret);
+ if (enable_off_delay_ms)
+ acpigen_write_sleep(ctx, enable_off_delay_ms);
+ }
+ acpigen_pop_len(ctx); /* _OFF method */
+
+ acpigen_pop_len(ctx); /* PowerResource PRIC */
+
+ return 0;
+}
+
/* ACPI 6.3 section 6.4.3.8.2.1 - I2cSerialBus() */
static void acpi_device_write_i2c(struct acpi_ctx *ctx,
const struct acpi_i2c *i2c)
@@ -791,3 +791,71 @@ static int dm_test_acpi_gpio_toggle(struct unit_test_state *uts)
return 0;
}
DM_TEST(dm_test_acpi_gpio_toggle, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+/* Test writing ACPI code to output power-sequence info */
+static int dm_test_acpi_power_seq(struct unit_test_state *uts)
+{
+ struct gpio_desc reset, enable, stop;
+ const uint addr = 0xc00dc, addr_act_low = 0x80012;
+ const int txbit = BIT(2);
+ struct acpi_ctx *ctx;
+ struct udevice *dev;
+ u8 *ptr;
+
+ ut_assertok(alloc_context_size(&ctx, 400));
+
+ ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev));
+ ut_asserteq_str("a-test", dev->name);
+ ut_assertok(gpio_request_by_name(dev, "test2-gpios", 0, &reset, 0));
+ ut_assertok(gpio_request_by_name(dev, "test2-gpios", 1, &enable, 0));
+ ut_assertok(gpio_request_by_name(dev, "test2-gpios", 2, &stop, 0));
+ ptr = acpigen_get_current(ctx);
+
+ ut_assertok(acpi_device_add_power_res(ctx, txbit, "\\_SB.GPC0",
+ &reset, 2, 3, &enable, 4, 5,
+ &stop, 6, 7));
+ ut_asserteq(0x16a, acpigen_get_current(ctx) - ptr);
+ ut_asserteq_strn("PRIC", (char *)ptr + 0x18);
+
+ /* First the 'ON' sequence - spot check */
+ ut_asserteq_strn("_ON_", (char *)ptr + 0x38);
+
+ /* reset set */
+ ut_asserteq(addr + reset.offset, get_unaligned((u32 *)(ptr + 0x49)));
+ ut_asserteq(OR_OP, ptr[0x4e]);
+
+ /* enable set */
+ ut_asserteq(addr + enable.offset, get_unaligned((u32 *)(ptr + 0x6e)));
+ ut_asserteq(OR_OP, ptr[0x73]);
+
+ /* reset clear */
+ ut_asserteq(addr + reset.offset, get_unaligned((u32 *)(ptr + 0x97)));
+ ut_asserteq(NOT_OP, ptr[0x9c]);
+
+ /* stop set (disable, active low) */
+ ut_asserteq(addr_act_low + stop.offset,
+ get_unaligned((u32 *)(ptr + 0xc3)));
+ ut_asserteq(OR_OP, ptr[0xc8]);
+
+ /* Now the 'OFF' sequence */
+ ut_asserteq_strn("_OFF", (char *)ptr + 0xe4);
+
+ /* stop clear (enable, active low) */
+ ut_asserteq(addr_act_low + stop.offset,
+ get_unaligned((u32 *)(ptr + 0xf5)));
+ ut_asserteq(NOT_OP, ptr[0xfa]);
+
+ /* reset clear */
+ ut_asserteq(addr + reset.offset, get_unaligned((u32 *)(ptr + 0x121)));
+ ut_asserteq(OR_OP, ptr[0x126]);
+
+ /* enable clear */
+ ut_asserteq(addr + enable.offset, get_unaligned((u32 *)(ptr + 0x14a)));
+ ut_asserteq(NOT_OP, ptr[0x14f]);
+
+ free_context(&ctx);
+
+ return 0;
+}
+
+DM_TEST(dm_test_acpi_power_seq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
Add a way for devices to enable and disable themselves using ACPI code that updates GPIOs. This takes several timing parameters and supports enable, reset and stop. Signed-off-by: Simon Glass <sjg at chromium.org> --- Changes in v1: None include/acpi/acpi_device.h | 41 ++++++++++++++++ lib/acpi/acpi_device.c | 99 ++++++++++++++++++++++++++++++++++++++ test/dm/acpigen.c | 68 ++++++++++++++++++++++++++ 3 files changed, 208 insertions(+)