From patchwork Fri May 1 13:44:17 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peng Fan X-Patchwork-Id: 244735 List-Id: U-Boot discussion From: peng.fan at nxp.com (Peng Fan) Date: Fri, 1 May 2020 21:44:17 +0800 Subject: [PATCH V2 8/9] cpu: imx_cpu: Print the CPU temperature for iMX8QM A72 In-Reply-To: <20200501134418.7319-1-peng.fan@nxp.com> References: <20200501134418.7319-1-peng.fan@nxp.com> Message-ID: <20200501134418.7319-8-peng.fan@nxp.com> From: Ye Li iMX8QM registers two thermal devices for CPUs, get the temperature from "cpu-thermal1" device for A72 Signed-off-by: Ye Li Signed-off-by: Peng Fan Reviewed-by: Simon Glass --- V2: Per Simon's comments, use uclass_get_device drivers/cpu/imx8_cpu.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/cpu/imx8_cpu.c b/drivers/cpu/imx8_cpu.c index c96a2d3563..817e0ffd01 100644 --- a/drivers/cpu/imx8_cpu.c +++ b/drivers/cpu/imx8_cpu.c @@ -61,13 +61,15 @@ const char *get_core_name(struct udevice *dev) } #if IS_ENABLED(CONFIG_IMX_SCU_THERMAL) -static int cpu_imx_get_temp(void) +static int cpu_imx_get_temp(struct cpu_imx_platdata *plat) { struct udevice *thermal_dev; int cpu_tmp, ret; - ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0", - &thermal_dev); + if (!strcmp(plat->name, "A72")) + ret = uclass_get_device(UCLASS_THERMAL, 1, &thermal_dev); + else + ret = uclass_get_device(UCLASS_THERMAL, 0, &thermal_dev); if (!ret) { ret = thermal_get_temp(thermal_dev, &cpu_tmp); @@ -80,7 +82,7 @@ static int cpu_imx_get_temp(void) return cpu_tmp; } #else -static int cpu_imx_get_temp(void) +static int cpu_imx_get_temp(struct cpu_imx_platdata *plat) { return 0; } @@ -89,7 +91,7 @@ static int cpu_imx_get_temp(void) int cpu_imx_get_desc(struct udevice *dev, char *buf, int size) { struct cpu_imx_platdata *plat = dev_get_platdata(dev); - int ret; + int ret, temp; if (size < 100) return -ENOSPC; @@ -98,9 +100,13 @@ int cpu_imx_get_desc(struct udevice *dev, char *buf, int size) plat->type, plat->rev, plat->name, plat->freq_mhz); if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) { + temp = cpu_imx_get_temp(plat); buf = buf + ret; size = size - ret; - ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp()); + if (temp != 0xdeadbeef) + ret = snprintf(buf, size, " at %dC", temp); + else + ret = snprintf(buf, size, " - invalid sensor data"); } snprintf(buf + ret, size - ret, "\n");