From patchwork Wed May 27 12:56:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246700 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Wed, 27 May 2020 18:26:21 +0530 Subject: [PATCH v2 07/23] siemens: rut: Enable DM_SPI, DM_SPI_FLASH In-Reply-To: <20200527125637.149189-1-jagan@amarulasolutions.com> References: <20200527125637.149189-1-jagan@amarulasolutions.com> Message-ID: <20200527125637.149189-8-jagan@amarulasolutions.com> Enable DM_SPI, DM_SPI_FLASH for siemens rut board. Build is fine, but not tested. Cc: Samuel Egli Signed-off-by: Jagan Teki --- Changes for v2: - new patch configs/rut_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/rut_defconfig b/configs/rut_defconfig index 40c9de25c6..9cc7826846 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -60,10 +60,12 @@ CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(spl),128k(spl.backup1),128k(spl.backup2),128k(spl.backup3),1920k(u-boot),128k(uboot.env),5120k(kernel_a),5120k(kernel_b),8192k(mtdoops),-(rootfs)" CONFIG_CMD_UBI=y CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="am335x-rut" CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SPL_DM=y CONFIG_BOOTCOUNT_LIMIT=y CONFIG_BOOTCOUNT_ENV=y CONFIG_DFU_NAND=y @@ -71,6 +73,7 @@ CONFIG_MMC_OMAP_HS=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_SPI_FLASH=y +CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_MTD_UBI_FASTMAP=y CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1 @@ -78,6 +81,7 @@ CONFIG_PHY_NATSEMI=y CONFIG_MII=y CONFIG_DRIVER_TI_CPSW=y CONFIG_SPI=y +CONFIG_DM_SPI=y CONFIG_OMAP3_SPI=y CONFIG_USB=y CONFIG_USB_MUSB_HOST=y