@@ -169,15 +169,6 @@ config TARGET_ARISTAINETOS2C
imply CMD_SATA
imply CMD_DM
-config TARGET_CGTQMX6EVAL
- bool "cgtqmx6eval"
- select BOARD_LATE_INIT
- select DM
- select DM_THERMAL
- select MX6QDL
- select SUPPORT_SPL
- imply CMD_DM
-
config TARGET_CM_FX6
bool "CM-FX6"
select BOARD_LATE_INIT
@@ -665,7 +656,6 @@ source "board/boundary/nitrogen6x/Kconfig"
source "board/bticino/mamoj/Kconfig"
source "board/ccv/xpress/Kconfig"
source "board/compulab/cm_fx6/Kconfig"
-source "board/congatec/cgtqmx6eval/Kconfig"
source "board/dhelectronics/dh_imx6/Kconfig"
source "board/engicam/imx6q/Kconfig"
source "board/engicam/imx6ul/Kconfig"
deleted file mode 100644
@@ -1,12 +0,0 @@
-if TARGET_CGTQMX6EVAL
-
-config SYS_BOARD
- default "cgtqmx6eval"
-
-config SYS_VENDOR
- default "congatec"
-
-config SYS_CONFIG_NAME
- default "cgtqmx6eval"
-
-endif
deleted file mode 100644
@@ -1,6 +0,0 @@
-CGTQMX6EVAL BOARD
-M: Otavio Salvador <otavio at ossystems.com.br>
-S: Maintained
-F: board/congatec/cgtqmx6eval/
-F: include/configs/cgtqmx6eval.h
-F: configs/cgtqmx6eval_defconfig
deleted file mode 100644
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007, Guennadi Liakhovetski <lg at denx.de>
-#
-# (C) Copyright 2011 Freescale Semiconductor, Inc.
-# (C) Copyright 2013 Adeneo Embedded <www.adeneo-embedded.com>
-
-obj-y := cgtqmx6eval.o
deleted file mode 100644
@@ -1,74 +0,0 @@
-U-Boot for the Congatec QMX6 boards
-
-This file contains information for the port of U-Boot to the Congatec
-QMX6 boards.
-
-1. Building U-Boot
-------------------
-
-- Build U-Boot for Congatec QMX6 boards:
-
-$ make mrproper
-$ make cgtqmx6eval_defconfig
-$ make
-
-This will generate the following binaries:
-
-- SPL
-- u-boot.img
-
-2. Flashing U-Boot in the SPI NOR
----------------------------------
-
-Copy SPL and u-boot.img to the exported TFTP directory of the
-host PC (/tftpboot , for example).
-
-=> sf probe
-
-=> setenv serverip <server_ip_address>
-
-=> setenv ipaddr <board_ip_address>
-
-=> tftp 0x12000000 SPL
-
-=> sf erase 0x0 0x10000
-
-=> sf write 0x12000000 0x400 0x10000
-
-=> tftp 0x12000000 u-boot.img
-
-=> sf erase 0x10000 0x70000
-
-=> sf write 0x12000000 0x10000 0x70000
-
-Reboot the board and the new U-Boot should come up.
-
-3. Booting from the SD card
----------------------------
-
-- Flash the SPL image into the SD card:
-
-sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
-
-- Flash the u-boot.img image into the SD card:
-
-sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
-
-- Insert the SD card into the big slot.
-
-The boot medium of Congatec QMX6 boards is the SPI NOR flash, so boot
-the board from SPI first.
-
-It is also possible to boot from the SD card slot by using the 'bmode'
-command:
-
-=> bmode esdhc4
-
-And then the U-Boot from the big slot will boot.
-
-Note: If the "bmode" command is not available from your pre-installed U-Boot,
-these instruction will produce the same effect:
-
-=> mw.l 0x20d8040 0x3850
-=> mw.l 0x020d8044 0x10000000
-=> reset
deleted file mode 100644
@@ -1,1091 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- * Based on mx6qsabrelite.c file
- * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
- * Leo Sartre, <lsartre at adeneo-embedded.com>
- */
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <asm/io.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/sata.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <env.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <i2c.h>
-#include <input.h>
-#include <linux/delay.h>
-#include <power/pmic.h>
-#include <power/pfuze100_pmic.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <malloc.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <micrel.h>
-#include <spi_flash.h>
-#include <spi.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |\
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
-
-#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
- PAD_CTL_ODE | PAD_CTL_SRE_FAST)
-
-#define SPI_PAD_CTRL (PAD_CTL_HYS | \
- PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
-
-#define MX6Q_QMX6_PFUZE_MUX IMX_GPIO_NR(6, 9)
-
-
-#define ENET_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
- PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
-int dram_init(void)
-{
- gd->ram_size = imx_ddr_size();
-
- return 0;
-}
-
-static iomux_v3_cfg_t const uart2_pads[] = {
- IOMUX_PADS(PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
-#ifndef CONFIG_SPL_BUILD
-static iomux_v3_cfg_t const usdhc2_pads[] = {
- IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
- IOMUX_PADS(PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
-};
-#endif
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
- IOMUX_PADS(PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
- IOMUX_PADS(PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const usb_otg_pads[] = {
- IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t enet_pads_ksz9031[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RXC__GPIO6_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__GPIO6_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__GPIO6_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__GPIO6_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__GPIO6_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t enet_pads_final_ksz9031[] = {
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t enet_pads_ar8035[] = {
- IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
- IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-};
-
-static iomux_v3_cfg_t const ecspi1_pads[] = {
- IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
- IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-struct i2c_pads_info mx6q_i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
- .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
- .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-struct i2c_pads_info mx6dl_i2c_pad_info1 = {
- .scl = {
- .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
- .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
- .gp = IMX_GPIO_NR(4, 12)
- },
- .sda = {
- .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
- .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
- .gp = IMX_GPIO_NR(4, 13)
- }
-};
-
-#define I2C_PMIC 1 /* I2C2 port is used to connect to the PMIC */
-
-struct interface_level {
- char *name;
- uchar value;
-};
-
-static struct interface_level mipi_levels[] = {
- {"0V0", 0x00},
- {"2V5", 0x17},
-};
-
-/* setup board specific PMIC */
-int power_init_board(void)
-{
- struct pmic *p;
- u32 id1, id2, i;
- int ret;
- char const *lv_mipi;
-
- /* configure I2C multiplexer */
- gpio_direction_output(MX6Q_QMX6_PFUZE_MUX, 1);
-
- power_pfuze100_init(I2C_PMIC);
- p = pmic_get("PFUZE100");
- if (!p)
- return -EINVAL;
-
- ret = pmic_probe(p);
- if (ret)
- return ret;
-
- pmic_reg_read(p, PFUZE100_DEVICEID, &id1);
- pmic_reg_read(p, PFUZE100_REVID, &id2);
- printf("PFUZE100 Rev. [%02x/%02x] detected\n", id1, id2);
-
- if (id2 >= 0x20)
- return 0;
-
- /* set level of MIPI if specified */
- lv_mipi = env_get("lv_mipi");
- if (lv_mipi)
- return 0;
-
- for (i = 0; i < ARRAY_SIZE(mipi_levels); i++) {
- if (!strcmp(mipi_levels[i].name, lv_mipi)) {
- printf("set MIPI level %s\n", mipi_levels[i].name);
- ret = pmic_reg_write(p, PFUZE100_VGEN4VOL,
- mipi_levels[i].value);
- if (ret)
- return ret;
- }
- }
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- struct phy_device *phydev;
- struct mii_dev *bus;
- unsigned short id1, id2;
- int ret;
-
- /* check whether KSZ9031 or AR8035 has to be configured */
- SETUP_IOMUX_PADS(enet_pads_ar8035);
-
- /* phy reset */
- gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
- udelay(2000);
- gpio_set_value(IMX_GPIO_NR(3, 23), 1);
- udelay(500);
-
- bus = fec_get_miibus(IMX_FEC_BASE, -1);
- if (!bus)
- return -EINVAL;
- phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
- if (!phydev) {
- printf("Error: phy device not found.\n");
- ret = -ENODEV;
- goto free_bus;
- }
-
- /* get the PHY id */
- id1 = phy_read(phydev, MDIO_DEVAD_NONE, 2);
- id2 = phy_read(phydev, MDIO_DEVAD_NONE, 3);
-
- if ((id1 == 0x22) && ((id2 & 0xFFF0) == 0x1620)) {
- /* re-configure for Micrel KSZ9031 */
- printf("configure Micrel KSZ9031 Ethernet Phy at address %d\n",
- phydev->addr);
-
- /* phy reset: gpio3-23 */
- gpio_set_value(IMX_GPIO_NR(3, 23), 0);
- gpio_set_value(IMX_GPIO_NR(6, 30), (phydev->addr >> 2));
- gpio_set_value(IMX_GPIO_NR(6, 25), 1);
- gpio_set_value(IMX_GPIO_NR(6, 27), 1);
- gpio_set_value(IMX_GPIO_NR(6, 28), 1);
- gpio_set_value(IMX_GPIO_NR(6, 29), 1);
- SETUP_IOMUX_PADS(enet_pads_ksz9031);
- gpio_set_value(IMX_GPIO_NR(6, 24), 1);
- udelay(500);
- gpio_set_value(IMX_GPIO_NR(3, 23), 1);
- SETUP_IOMUX_PADS(enet_pads_final_ksz9031);
- } else if ((id1 == 0x004d) && (id2 == 0xd072)) {
- /* configure Atheros AR8035 - actually nothing to do */
- printf("configure Atheros AR8035 Ethernet Phy at address %d\n",
- phydev->addr);
- } else {
- printf("Unknown Ethernet-Phy: 0x%04x 0x%04x\n", id1, id2);
- ret = -EINVAL;
- goto free_phydev;
- }
-
- ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev);
- if (ret)
- goto free_phydev;
-
- return 0;
-
-free_phydev:
- free(phydev);
-free_bus:
- free(bus);
- return ret;
-}
-
-int mx6_rgmii_rework(struct phy_device *phydev)
-{
- unsigned short id1, id2;
- unsigned short val;
-
- /* check whether KSZ9031 or AR8035 has to be configured */
- id1 = phy_read(phydev, MDIO_DEVAD_NONE, 2);
- id2 = phy_read(phydev, MDIO_DEVAD_NONE, 3);
-
- if ((id1 == 0x22) && ((id2 & 0xFFF0) == 0x1620)) {
- /* finalize phy configuration for Micrel KSZ9031 */
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 4);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x0000);
-
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 5);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, MII_KSZ9031_MOD_REG);
-
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 6);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0xFFFF);
-
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 8);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_POST_INC_W | 0x2);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x3FFF);
-
- /* fix KSZ9031 link up issue */
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 0x0);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x4);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_NO_POST_INC);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x6);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_REG);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x3);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_NO_POST_INC);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, 0x1A80);
- }
-
- if ((id1 == 0x004d) && (id2 == 0xd072)) {
- /* enable AR8035 ouput a 125MHz clk from CLK_25M */
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, 0x7);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, MII_KSZ9031_MOD_DATA_POST_INC_RW | 0x16);
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_CONTROL, MII_KSZ9031_MOD_DATA_NO_POST_INC | 0x7);
- val = phy_read(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA);
- val &= 0xfe63;
- val |= 0x18;
- phy_write(phydev, MDIO_DEVAD_NONE, MMD_ACCESS_REG_DATA, val);
-
- /* introduce tx clock delay */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
- val |= 0x0100;
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-
- /* disable hibernation */
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0xb);
- val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
- phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3c40);
- }
- return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
- mx6_rgmii_rework(phydev);
-
- if (phydev->drv->config)
- phydev->drv->config(phydev);
-
- return 0;
-}
-
-static void setup_iomux_uart(void)
-{
- SETUP_IOMUX_PADS(uart2_pads);
-}
-
-#ifdef CONFIG_MXC_SPI
-static void setup_spi(void)
-{
- SETUP_IOMUX_PADS(ecspi1_pads);
- gpio_direction_output(IMX_GPIO_NR(3, 19), 0);
-}
-#endif
-
-#ifdef CONFIG_FSL_ESDHC_IMX
-static struct fsl_esdhc_cfg usdhc_cfg[] = {
- {USDHC2_BASE_ADDR},
- {USDHC3_BASE_ADDR},
- {USDHC4_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- int ret = 0;
-
- switch (cfg->esdhc_base) {
- case USDHC2_BASE_ADDR:
- gpio_direction_input(IMX_GPIO_NR(1, 4));
- ret = !gpio_get_value(IMX_GPIO_NR(1, 4));
- break;
- case USDHC3_BASE_ADDR:
- ret = 1; /* eMMC is always present */
- break;
- case USDHC4_BASE_ADDR:
- gpio_direction_input(IMX_GPIO_NR(2, 6));
- ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
- break;
- default:
- printf("Bad USDHC interface\n");
- }
-
- return ret;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-#ifndef CONFIG_SPL_BUILD
- s32 status = 0;
- int i;
-
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
- usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
- usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-
- SETUP_IOMUX_PADS(usdhc2_pads);
- SETUP_IOMUX_PADS(usdhc3_pads);
- SETUP_IOMUX_PADS(usdhc4_pads);
-
- for (i = 0; i < ARRAY_SIZE(usdhc_cfg); i++) {
- status = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
- if (status)
- return status;
- }
-
- return 0;
-#else
- SETUP_IOMUX_PADS(usdhc4_pads);
- usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
- gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
-
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-#endif
-}
-#endif
-
-int board_ehci_hcd_init(int port)
-{
- switch (port) {
- case 0:
- SETUP_IOMUX_PADS(usb_otg_pads);
- /*
- * set daisy chain for otg_pin_id on 6q.
- * for 6dl, this bit is reserved
- */
- imx_iomux_set_gpr_register(1, 13, 1, 1);
- break;
- case 1:
- /* nothing to do */
- break;
- default:
- printf("Invalid USB port: %d\n", port);
- return -EINVAL;
- }
-
- return 0;
-}
-
-int board_ehci_power(int port, int on)
-{
- switch (port) {
- case 0:
- break;
- case 1:
- gpio_direction_output(IMX_GPIO_NR(5, 5), on);
- break;
- default:
- printf("Invalid USB port: %d\n", port);
- return -EINVAL;
- }
-
- return 0;
-}
-
-struct display_info_t {
- int bus;
- int addr;
- int pixfmt;
- int (*detect)(struct display_info_t const *dev);
- void (*enable)(struct display_info_t const *dev);
- struct fb_videomode mode;
-};
-
-static void disable_lvds(struct display_info_t const *dev)
-{
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
- clrbits_le32(&iomux->gpr[2], IOMUXC_GPR2_LVDS_CH0_MODE_MASK |
- IOMUXC_GPR2_LVDS_CH1_MODE_MASK);
-}
-
-static void do_enable_hdmi(struct display_info_t const *dev)
-{
- disable_lvds(dev);
- imx_enable_hdmi_phy();
-}
-
-static struct display_info_t const displays[] = {
-{
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB666,
- .detect = NULL,
- .enable = NULL,
- .mode = {
- .name =
- "Hannstar-XGA",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15385,
- .left_margin = 220,
- .right_margin = 40,
- .upper_margin = 21,
- .lower_margin = 7,
- .hsync_len = 60,
- .vsync_len = 10,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED } },
-{
- .bus = -1,
- .addr = 0,
- .pixfmt = IPU_PIX_FMT_RGB24,
- .detect = NULL,
- .enable = do_enable_hdmi,
- .mode = {
- .name = "HDMI",
- .refresh = 60,
- .xres = 1024,
- .yres = 768,
- .pixclock = 15385,
- .left_margin = 220,
- .right_margin = 40,
- .upper_margin = 21,
- .lower_margin = 7,
- .hsync_len = 60,
- .vsync_len = 10,
- .sync = FB_SYNC_EXT,
- .vmode = FB_VMODE_NONINTERLACED } }
-};
-
-int board_video_skip(void)
-{
- int i;
- int ret;
- char const *panel = env_get("panel");
- if (!panel) {
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- struct display_info_t const *dev = displays + i;
- if (dev->detect && dev->detect(dev)) {
- panel = dev->mode.name;
- printf("auto-detected panel %s\n", panel);
- break;
- }
- }
- if (!panel) {
- panel = displays[0].mode.name;
- printf("No panel detected: default to %s\n", panel);
- i = 0;
- }
- } else {
- for (i = 0; i < ARRAY_SIZE(displays); i++) {
- if (!strcmp(panel, displays[i].mode.name))
- break;
- }
- }
- if (i < ARRAY_SIZE(displays)) {
- ret = ipuv3_fb_init(&displays[i].mode, 0, displays[i].pixfmt);
- if (!ret) {
- if (displays[i].enable)
- displays[i].enable(displays + i);
- printf("Display: %s (%ux%u)\n",
- displays[i].mode.name, displays[i].mode.xres,
- displays[i].mode.yres);
- } else
- printf("LCD %s cannot be configured: %d\n",
- displays[i].mode.name, ret);
- } else {
- printf("unsupported panel %s\n", panel);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void setup_display(void)
-{
- struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
- struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
- int reg;
-
- enable_ipu_clock();
- imx_setup_hdmi();
-
- /* Turn on LDB0, LDB1, IPU,IPU DI0 clocks */
- setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_LDB_DI0_MASK |
- MXC_CCM_CCGR3_LDB_DI1_MASK);
-
- /* set LDB0, LDB1 clk select to 011/011 */
- reg = readl(&mxc_ccm->cs2cdr);
- reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK |
- MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
- reg |= (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET) |
- (3 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
- writel(reg, &mxc_ccm->cs2cdr);
-
- setbits_le32(&mxc_ccm->cscmr2, MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV |
- MXC_CCM_CSCMR2_LDB_DI1_IPU_DIV);
-
- setbits_le32(&mxc_ccm->chsccdr, CHSCCDR_CLK_SEL_LDB_DI0 <<
- MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET |
- CHSCCDR_CLK_SEL_LDB_DI0 <<
- MXC_CCM_CHSCCDR_IPU1_DI1_CLK_SEL_OFFSET);
-
- reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
- | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_LOW
- | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
- | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
- | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
- | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
- | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
- | IOMUXC_GPR2_LVDS_CH0_MODE_DISABLED
- | IOMUXC_GPR2_LVDS_CH1_MODE_ENABLED_DI0;
- writel(reg, &iomux->gpr[2]);
-
- reg = readl(&iomux->gpr[3]);
- reg = (reg & ~(IOMUXC_GPR3_LVDS1_MUX_CTL_MASK |
- IOMUXC_GPR3_HDMI_MUX_CTL_MASK)) |
- (IOMUXC_GPR3_MUX_SRC_IPU1_DI0 <<
- IOMUXC_GPR3_LVDS1_MUX_CTL_OFFSET);
- writel(reg, &iomux->gpr[3]);
-}
-
-/*
- * Do not overwrite the console
- * Use always serial for U-Boot console
- */
-int overwrite_console(void)
-{
- return 1;
-}
-
-int board_early_init_f(void)
-{
- setup_iomux_uart();
-#ifdef CONFIG_MXC_SPI
- setup_spi();
-#endif
- return 0;
-}
-
-int board_init(void)
-{
- /* address of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-
- if (is_mx6dq())
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
- else
- setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
-
- setup_display();
-
-#ifdef CONFIG_SATA
- setup_sata();
-#endif
-
- return 0;
-}
-
-int checkboard(void)
-{
- char *type = "unknown";
-
- if (is_cpu_type(MXC_CPU_MX6Q))
- type = "Quad";
- else if (is_cpu_type(MXC_CPU_MX6D))
- type = "Dual";
- else if (is_cpu_type(MXC_CPU_MX6DL))
- type = "Dual-Lite";
- else if (is_cpu_type(MXC_CPU_MX6SOLO))
- type = "Solo";
-
- printf("Board: conga-QMX6 %s\n", type);
-
- return 0;
-}
-
-#ifdef CONFIG_MXC_SPI
-int board_spi_cs_gpio(unsigned bus, unsigned cs)
-{
- return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -EINVAL;
-}
-#endif
-
-#ifdef CONFIG_CMD_BMODE
-static const struct boot_mode board_boot_modes[] = {
- /* 4 bit bus width */
- {"mmc0", MAKE_CFGVAL(0x50, 0x20, 0x00, 0x00)},
- {"mmc1", MAKE_CFGVAL(0x50, 0x38, 0x00, 0x00)},
- {NULL, 0},
-};
-#endif
-
-int misc_init_r(void)
-{
-#ifdef CONFIG_CMD_BMODE
- add_board_boot_modes(board_boot_modes);
-#endif
- return 0;
-}
-
-int board_late_init(void)
-{
-#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
- if (is_mx6dq())
- env_set("board_rev", "MX6Q");
- else
- env_set("board_rev", "MX6DL");
-#endif
-
- return 0;
-}
-
-#ifdef CONFIG_SPL_BUILD
-#include <asm/arch/mx6-ddr.h>
-#include <spl.h>
-#include <linux/libfdt.h>
-#include <spi_flash.h>
-#include <spi.h>
-
-const struct mx6dq_iomux_ddr_regs mx6q_ddr_ioregs = {
- .dram_sdclk_0 = 0x00000030,
- .dram_sdclk_1 = 0x00000030,
- .dram_cas = 0x00000030,
- .dram_ras = 0x00000030,
- .dram_reset = 0x00000030,
- .dram_sdcke0 = 0x00003000,
- .dram_sdcke1 = 0x00003000,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x00000030,
- .dram_sdodt1 = 0x00000030,
- .dram_sdqs0 = 0x00000030,
- .dram_sdqs1 = 0x00000030,
- .dram_sdqs2 = 0x00000030,
- .dram_sdqs3 = 0x00000030,
- .dram_sdqs4 = 0x00000030,
- .dram_sdqs5 = 0x00000030,
- .dram_sdqs6 = 0x00000030,
- .dram_sdqs7 = 0x00000030,
- .dram_dqm0 = 0x00000030,
- .dram_dqm1 = 0x00000030,
- .dram_dqm2 = 0x00000030,
- .dram_dqm3 = 0x00000030,
- .dram_dqm4 = 0x00000030,
- .dram_dqm5 = 0x00000030,
- .dram_dqm6 = 0x00000030,
- .dram_dqm7 = 0x00000030,
-};
-
-static const struct mx6sdl_iomux_ddr_regs mx6dl_ddr_ioregs = {
- .dram_sdclk_0 = 0x00000030,
- .dram_sdclk_1 = 0x00000030,
- .dram_cas = 0x00000030,
- .dram_ras = 0x00000030,
- .dram_reset = 0x00000030,
- .dram_sdcke0 = 0x00003000,
- .dram_sdcke1 = 0x00003000,
- .dram_sdba2 = 0x00000000,
- .dram_sdodt0 = 0x00000030,
- .dram_sdodt1 = 0x00000030,
- .dram_sdqs0 = 0x00000030,
- .dram_sdqs1 = 0x00000030,
- .dram_sdqs2 = 0x00000030,
- .dram_sdqs3 = 0x00000030,
- .dram_sdqs4 = 0x00000030,
- .dram_sdqs5 = 0x00000030,
- .dram_sdqs6 = 0x00000030,
- .dram_sdqs7 = 0x00000030,
- .dram_dqm0 = 0x00000030,
- .dram_dqm1 = 0x00000030,
- .dram_dqm2 = 0x00000030,
- .dram_dqm3 = 0x00000030,
- .dram_dqm4 = 0x00000030,
- .dram_dqm5 = 0x00000030,
- .dram_dqm6 = 0x00000030,
- .dram_dqm7 = 0x00000030,
-};
-
-const struct mx6dq_iomux_grp_regs mx6q_grp_ioregs = {
- .grp_ddr_type = 0x000C0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = 0x00000030,
- .grp_ctlds = 0x00000030,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = 0x00000030,
- .grp_b1ds = 0x00000030,
- .grp_b2ds = 0x00000030,
- .grp_b3ds = 0x00000030,
- .grp_b4ds = 0x00000030,
- .grp_b5ds = 0x00000030,
- .grp_b6ds = 0x00000030,
- .grp_b7ds = 0x00000030,
-};
-
-static const struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
- .grp_ddr_type = 0x000c0000,
- .grp_ddrmode_ctl = 0x00020000,
- .grp_ddrpke = 0x00000000,
- .grp_addds = 0x00000030,
- .grp_ctlds = 0x00000030,
- .grp_ddrmode = 0x00020000,
- .grp_b0ds = 0x00000030,
- .grp_b1ds = 0x00000030,
- .grp_b2ds = 0x00000030,
- .grp_b3ds = 0x00000030,
- .grp_b4ds = 0x00000030,
- .grp_b5ds = 0x00000030,
- .grp_b6ds = 0x00000030,
- .grp_b7ds = 0x00000030,
-};
-
-const struct mx6_mmdc_calibration mx6q_mmcd_calib = {
- .p0_mpwldectrl0 = 0x0016001A,
- .p0_mpwldectrl1 = 0x0023001C,
- .p1_mpwldectrl0 = 0x0028003A,
- .p1_mpwldectrl1 = 0x001F002C,
- .p0_mpdgctrl0 = 0x43440354,
- .p0_mpdgctrl1 = 0x033C033C,
- .p1_mpdgctrl0 = 0x43300368,
- .p1_mpdgctrl1 = 0x03500330,
- .p0_mprddlctl = 0x3228242E,
- .p1_mprddlctl = 0x2C2C2636,
- .p0_mpwrdlctl = 0x36323A38,
- .p1_mpwrdlctl = 0x42324440,
-};
-
-const struct mx6_mmdc_calibration mx6q_2g_mmcd_calib = {
- .p0_mpwldectrl0 = 0x00080016,
- .p0_mpwldectrl1 = 0x001D0016,
- .p1_mpwldectrl0 = 0x0018002C,
- .p1_mpwldectrl1 = 0x000D001D,
- .p0_mpdgctrl0 = 0x43200334,
- .p0_mpdgctrl1 = 0x0320031C,
- .p1_mpdgctrl0 = 0x0344034C,
- .p1_mpdgctrl1 = 0x03380314,
- .p0_mprddlctl = 0x3E36383A,
- .p1_mprddlctl = 0x38363240,
- .p0_mpwrdlctl = 0x36364238,
- .p1_mpwrdlctl = 0x4230423E,
-};
-
-static const struct mx6_mmdc_calibration mx6s_mmcd_calib = {
- .p0_mpwldectrl0 = 0x00480049,
- .p0_mpwldectrl1 = 0x00410044,
- .p0_mpdgctrl0 = 0x42480248,
- .p0_mpdgctrl1 = 0x023C023C,
- .p0_mprddlctl = 0x40424644,
- .p0_mpwrdlctl = 0x34323034,
-};
-
-const struct mx6_mmdc_calibration mx6dl_mmcd_calib = {
- .p0_mpwldectrl0 = 0x0043004B,
- .p0_mpwldectrl1 = 0x003A003E,
- .p1_mpwldectrl0 = 0x0047004F,
- .p1_mpwldectrl1 = 0x004E0061,
- .p0_mpdgctrl0 = 0x42500250,
- .p0_mpdgctrl1 = 0x0238023C,
- .p1_mpdgctrl0 = 0x42640264,
- .p1_mpdgctrl1 = 0x02500258,
- .p0_mprddlctl = 0x40424846,
- .p1_mprddlctl = 0x46484842,
- .p0_mpwrdlctl = 0x38382C30,
- .p1_mpwrdlctl = 0x34343430,
-};
-
-static struct mx6_ddr3_cfg mem_ddr_2g = {
- .mem_speed = 1600,
- .density = 2,
- .width = 16,
- .banks = 8,
- .rowaddr = 14,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1310,
- .trcmin = 4875,
- .trasmin = 3500,
-};
-
-static struct mx6_ddr3_cfg mem_ddr_4g = {
- .mem_speed = 1600,
- .density = 4,
- .width = 16,
- .banks = 8,
- .rowaddr = 15,
- .coladdr = 10,
- .pagesz = 2,
- .trcd = 1310,
- .trcmin = 4875,
- .trasmin = 3500,
-};
-
-static void ccgr_init(void)
-{
- struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
- writel(0x00C03F3F, &ccm->CCGR0);
- writel(0x0030FC03, &ccm->CCGR1);
- writel(0x0FFFC000, &ccm->CCGR2);
- writel(0x3FF00000, &ccm->CCGR3);
- writel(0x00FFF300, &ccm->CCGR4);
- writel(0x0F0000C3, &ccm->CCGR5);
- writel(0x000003FF, &ccm->CCGR6);
-}
-
-/* Define a minimal structure so that the part number can be read via SPL */
-struct mfgdata {
- unsigned char tsize;
- /* size of checksummed part in bytes */
- unsigned char ckcnt;
- /* checksum corrected byte */
- unsigned char cksum;
- /* decimal serial number, packed BCD */
- unsigned char serial[6];
- /* part number, right justified, ASCII */
- unsigned char pn[16];
-};
-
-static void conv_ascii(unsigned char *dst, unsigned char *src, int len)
-{
- int remain = len;
- unsigned char *sptr = src;
- unsigned char *dptr = dst;
-
- while (remain) {
- if (*sptr) {
- *dptr = *sptr;
- dptr++;
- }
- sptr++;
- remain--;
- }
- *dptr = 0x0;
-}
-
-#define CFG_MFG_ADDR_OFFSET (spi->size - SZ_16K)
-static bool is_2gb(void)
-{
- struct spi_flash *spi;
- int ret;
- char buf[sizeof(struct mfgdata)];
- struct mfgdata *data = (struct mfgdata *)buf;
- unsigned char outbuf[32];
-
- spi = spi_flash_probe(CONFIG_ENV_SPI_BUS,
- CONFIG_ENV_SPI_CS,
- CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
- ret = spi_flash_read(spi, CFG_MFG_ADDR_OFFSET, sizeof(struct mfgdata),
- buf);
- if (ret)
- return false;
-
- /* Congatec Part Numbers 104 and 105 have 2GiB of RAM */
- conv_ascii(outbuf, data->pn, sizeof(data->pn));
- if (!memcmp(outbuf, "016104", 6) || !memcmp(outbuf, "016105", 6))
- return true;
- else
- return false;
-}
-
-static void spl_dram_init(int width)
-{
- struct mx6_ddr_sysinfo sysinfo = {
- /* width of data bus:0=16,1=32,2=64 */
- .dsize = width / 32,
- /* config for full 4GB range so that get_mem_size() works */
- .cs_density = 32, /* 32Gb per CS */
- /* single chip select */
- .ncs = 1,
- .cs1_mirror = 0,
- .rtt_wr = 2,
- .rtt_nom = 2,
- .walat = 0,
- .ralat = 5,
- .mif3_mode = 3,
- .bi_on = 1,
- .sde_to_rst = 0x0d,
- .rst_to_cke = 0x20,
- .refsel = 1, /* Refresh cycles at 32KHz */
- .refr = 7, /* 8 refresh commands per refresh cycle */
- };
-
- if (is_cpu_type(MXC_CPU_MX6Q) && is_2gb()) {
- mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
- mx6_dram_cfg(&sysinfo, &mx6q_2g_mmcd_calib, &mem_ddr_4g);
- return;
- }
-
- if (is_mx6dq()) {
- mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
- mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g);
- } else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
- sysinfo.walat = 1;
- mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&sysinfo, &mx6s_mmcd_calib, &mem_ddr_4g);
- } else if (is_cpu_type(MXC_CPU_MX6DL)) {
- sysinfo.walat = 1;
- mx6sdl_dram_iocfg(width, &mx6dl_ddr_ioregs, &mx6sdl_grp_ioregs);
- mx6_dram_cfg(&sysinfo, &mx6dl_mmcd_calib, &mem_ddr_2g);
- }
-}
-
-void board_init_f(ulong dummy)
-{
- /* setup AIPS and disable watchdog */
- arch_cpu_init();
-
- ccgr_init();
- gpr_init();
-
- /* iomux and setup of i2c */
- board_early_init_f();
-
- /* setup GP timer */
- timer_init();
-
- /* UART clocks enabled and gd valid - init serial console */
- preloader_console_init();
-
- /* Needed for malloc() to work in SPL prior to board_init_r() */
- spl_init();
-
- /* DDR initialization */
- if (is_cpu_type(MXC_CPU_MX6SOLO))
- spl_dram_init(32);
- else
- spl_dram_init(64);
-
- /* Clear the BSS. */
- memset(__bss_start, 0, __bss_end - __bss_start);
-
- /* load/boot image from boot device */
- board_init_r(NULL, 0);
-}
-#endif
deleted file mode 100644
@@ -1,85 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_SPL_GPIO_SUPPORT=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
-CONFIG_TARGET_CGTQMX6EVAL=y
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_SPL_TEXT_BASE=0x00908000
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_MISC_INIT_R=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_FS_EXT4=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SPL_WATCHDOG_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="CGT-QMX6-Quad U-Boot > "
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SATA=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
-CONFIG_DWC_AHSATA=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x12000000
-CONFIG_FSL_USDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_PHYLIB=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_MII=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_KEYBOARD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Congatec"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_VIDEO_IPUV3=y
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
deleted file mode 100644
@@ -1,209 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- *
- * Congatec Conga-QEVAl board configuration file.
- *
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
- * Based on Freescale i.MX6Q Sabre Lite board configuration file.
- * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
- * Leo Sartre, <lsartre at adeneo-embedded.com>
- */
-
-#ifndef __CONFIG_CGTQMX6EVAL_H
-#define __CONFIG_CGTQMX6EVAL_H
-
-#include <linux/stringify.h>
-
-#include "mx6_common.h"
-
-#define CONFIG_MACH_TYPE 4122
-
-#ifdef CONFIG_SPL
-#include "imx6_spl.h"
-#endif
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART2_BASE
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-/* SPI NOR */
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_SPI_FLASH_SST
-
-/* Thermal support */
-#define CONFIG_IMX_THERMAL
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE100
-#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-
-/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
-
-#define CONFIG_USBD_HS
-
-/* Framebuffer */
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_SPLASH_SCREEN_ALIGN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_IMX_HDMI
-
-/* SATA */
-#define CONFIG_SYS_SATA_MAX_DEVICE 1
-#define CONFIG_DWC_AHSATA_PORT_ID 0
-#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-#define CONFIG_LBA48
-
-/* Ethernet */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 6
-
-/* Command definition */
-
-#define CONFIG_MXC_UART_BASE UART2_BASE
-#define CONSOLE_DEV "ttymxc1"
-#define CONFIG_MMCROOT "/dev/mmcblk0p2"
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "fdtfile=undefined\0" \
- "fdt_addr_r=0x18000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "console=" CONSOLE_DEV "\0" \
- "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
- "dfu_alt_info_spl=spl raw 0x400\0" \
- "dfu_alt_info_img=u-boot raw 0x10000\0" \
- "dfu_alt_info=spl raw 0x400\0" \
- "bootm_size=0x10000000\0" \
- "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
- "mmcpart=1\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
- "update_sd_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if mmc dev ${mmcdev}; then " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=${mmcroot}\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr_r}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "findfdt="\
- "if test $board_rev = MX6Q ; then " \
- "setenv fdtfile imx6q-qmx6.dtb; fi; " \
- "if test $board_rev = MX6DL ; then " \
- "setenv fdtfile imx6dl-qmx6.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
- "echo WARNING: Could not determine dtb to use; fi; \0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
- "bootz ${loadaddr} - ${fdt_addr_r}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "spilock=sf probe && sf protect lock 0x3f0000 0x10000;"\
-
-#define CONFIG_BOOTCOMMAND \
- "run spilock;" \
- "run findfdt; " \
- "mmc dev ${mmcdev};" \
- "if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else run netboot; fi"
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* Environment organization */
-#if defined (CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV 0
-#endif
-
-#endif /* __CONFIG_CGTQMX6EVAL_H */
OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Patch-cc: Otavio Salvador <otavio at ossystems.com.br> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com> --- arch/arm/mach-imx/mx6/Kconfig | 10 - board/congatec/cgtqmx6eval/Kconfig | 12 - board/congatec/cgtqmx6eval/MAINTAINERS | 6 - board/congatec/cgtqmx6eval/Makefile | 8 - board/congatec/cgtqmx6eval/README | 74 -- board/congatec/cgtqmx6eval/cgtqmx6eval.c | 1091 ---------------------- configs/cgtqmx6eval_defconfig | 85 -- include/configs/cgtqmx6eval.h | 209 ----- 8 files changed, 1495 deletions(-) delete mode 100644 board/congatec/cgtqmx6eval/Kconfig delete mode 100644 board/congatec/cgtqmx6eval/MAINTAINERS delete mode 100644 board/congatec/cgtqmx6eval/Makefile delete mode 100644 board/congatec/cgtqmx6eval/README delete mode 100644 board/congatec/cgtqmx6eval/cgtqmx6eval.c delete mode 100644 configs/cgtqmx6eval_defconfig delete mode 100644 include/configs/cgtqmx6eval.h