From patchwork Thu Jun 18 23:21:19 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Fabio Estevam X-Patchwork-Id: 242643 List-Id: U-Boot discussion From: festevam at gmail.com (Fabio Estevam) Date: Thu, 18 Jun 2020 20:21:19 -0300 Subject: [PATCH v3 3/4] ARM: dts: imx6qdl-sr-som: Sync with kernel 5.8-rc1 In-Reply-To: <20200618232120.3289-1-festevam@gmail.com> References: <20200618232120.3289-1-festevam@gmail.com> Message-ID: <20200618232120.3289-3-festevam@gmail.com> Sync the device tree with 5.8-rc1. It basically contains the following extra kernel commit: commit 86b08bd5b99480b79a25343f24c1b8c4ddcb5c09 Author: Russell King Date: Wed Apr 15 16:44:17 2020 +0100 ARM: dts: imx6-sr-som: add ethernet PHY configuration Add ethernet PHY configuration ahead of removing the quirk that configures the clocking mode for the PHY. The RGMII delay is already set correctly. Signed-off-by: Russell King Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo , which passes the 'qca,clk-out-frequency' property and it is important to specify the correct frequency generated by the AR8035. Signed-off-by: Fabio Estevam Tested-by: Tom Rini --- Changes since v2: - Change from AR8031 to AR8035, as cubox uses AR8035 arch/arm/dts/imx6qdl-sr-som.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/dts/imx6qdl-sr-som.dtsi b/arch/arm/dts/imx6qdl-sr-som.dtsi index 6d7f6b9035..b06577808f 100644 --- a/arch/arm/dts/imx6qdl-sr-som.dtsi +++ b/arch/arm/dts/imx6qdl-sr-som.dtsi @@ -53,10 +53,21 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-handle = <&phy>; phy-mode = "rgmii-id"; phy-reset-duration = <2>; phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy at 0 { + reg = <0>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &iomuxc {