@@ -32,12 +32,6 @@
#include "k3-udma-hwdef.h"
#include "k3-psil-priv.h"
-#if BITS_PER_LONG == 64
-#define RINGACC_RING_USE_PROXY (0)
-#else
-#define RINGACC_RING_USE_PROXY (1)
-#endif
-
#define K3_UDMA_MAX_RFLOWS 1024
struct udma_chan;
@@ -796,21 +790,14 @@ static int udma_alloc_tx_resources(struct udma_chan *uc)
if (ret)
return ret;
- uc->tchan->t_ring = k3_nav_ringacc_request_ring(
- ud->ringacc, uc->tchan->id,
- RINGACC_RING_USE_PROXY);
- if (!uc->tchan->t_ring) {
+ ret = k3_nav_ringacc_request_rings_pair(ud->ringacc, uc->tchan->id, -1,
+ &uc->tchan->t_ring,
+ &uc->tchan->tc_ring);
+ if (ret) {
ret = -EBUSY;
goto err_tx_ring;
}
- uc->tchan->tc_ring = k3_nav_ringacc_request_ring(
- ud->ringacc, -1, RINGACC_RING_USE_PROXY);
- if (!uc->tchan->tc_ring) {
- ret = -EBUSY;
- goto err_txc_ring;
- }
-
memset(&ring_cfg, 0, sizeof(ring_cfg));
ring_cfg.size = 16;
ring_cfg.elm_size = K3_NAV_RINGACC_RING_ELSIZE_8;
@@ -827,7 +814,6 @@ static int udma_alloc_tx_resources(struct udma_chan *uc)
err_ringcfg:
k3_nav_ringacc_ring_free(uc->tchan->tc_ring);
uc->tchan->tc_ring = NULL;
-err_txc_ring:
k3_nav_ringacc_ring_free(uc->tchan->t_ring);
uc->tchan->t_ring = NULL;
err_tx_ring:
@@ -857,6 +843,7 @@ static int udma_alloc_rx_resources(struct udma_chan *uc)
{
struct k3_nav_ring_cfg ring_cfg;
struct udma_dev *ud = uc->ud;
+ struct udma_rflow *rflow;
int fd_ring_id;
int ret;
@@ -876,40 +863,31 @@ static int udma_alloc_rx_resources(struct udma_chan *uc)
fd_ring_id = ud->tchan_cnt + ud->echan_cnt + uc->rchan->id;
- uc->rflow->fd_ring = k3_nav_ringacc_request_ring(
- ud->ringacc, fd_ring_id,
- RINGACC_RING_USE_PROXY);
- if (!uc->rflow->fd_ring) {
+ rflow = uc->rflow;
+ ret = k3_nav_ringacc_request_rings_pair(ud->ringacc, fd_ring_id, -1,
+ &rflow->fd_ring, &rflow->r_ring);
+ if (ret) {
ret = -EBUSY;
goto err_rx_ring;
}
- uc->rflow->r_ring = k3_nav_ringacc_request_ring(
- ud->ringacc, -1, RINGACC_RING_USE_PROXY);
- if (!uc->rflow->r_ring) {
- ret = -EBUSY;
- goto err_rxc_ring;
- }
-
memset(&ring_cfg, 0, sizeof(ring_cfg));
ring_cfg.size = 16;
ring_cfg.elm_size = K3_NAV_RINGACC_RING_ELSIZE_8;
ring_cfg.mode = K3_NAV_RINGACC_RING_MODE_RING;
- ret = k3_nav_ringacc_ring_cfg(uc->rflow->fd_ring, &ring_cfg);
- ret |= k3_nav_ringacc_ring_cfg(uc->rflow->r_ring, &ring_cfg);
-
+ ret = k3_nav_ringacc_ring_cfg(rflow->fd_ring, &ring_cfg);
+ ret |= k3_nav_ringacc_ring_cfg(rflow->r_ring, &ring_cfg);
if (ret)
goto err_ringcfg;
return 0;
err_ringcfg:
- k3_nav_ringacc_ring_free(uc->rflow->r_ring);
- uc->rflow->r_ring = NULL;
-err_rxc_ring:
- k3_nav_ringacc_ring_free(uc->rflow->fd_ring);
- uc->rflow->fd_ring = NULL;
+ k3_nav_ringacc_ring_free(rflow->r_ring);
+ rflow->r_ring = NULL;
+ k3_nav_ringacc_ring_free(rflow->fd_ring);
+ rflow->fd_ring = NULL;
err_rx_ring:
udma_put_rflow(uc);
err_rflow:
We only request ring pairs via K3 DMA driver, switch to use the new k3_ringacc_request_rings_pair() to simplify the code. As a good side effect, all boot stages now use exposed RING mode which avoid maintaining proxy mode for 32 bit R5 core. Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com> --- drivers/dma/ti/k3-udma.c | 52 ++++++++++++---------------------------- 1 file changed, 15 insertions(+), 37 deletions(-)