From patchwork Fri Jan 20 07:17:18 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sumit Garg X-Patchwork-Id: 644617 Delivered-To: patch@linaro.org Received: by 2002:a17:522:b9de:b0:4b9:b062:db3b with SMTP id fj30csp638502pvb; Thu, 19 Jan 2023 23:20:40 -0800 (PST) X-Google-Smtp-Source: AMrXdXvovAZdAdzrAKKwhF8nMtcLWsUDtf+M4ZOYo+bY/5YmmseMI56XdKZeFjsVKnrmLWeFTfyq X-Received: by 2002:a05:6830:168b:b0:686:64a8:515 with SMTP id k11-20020a056830168b00b0068664a80515mr3004159otr.2.1674199240683; Thu, 19 Jan 2023 23:20:40 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1674199240; cv=none; d=google.com; s=arc-20160816; b=KMeWaAlag5fbpD+Ru+6bLEoDM1NKJcniPsXyv79KtPQ9BL+xFQGakjIaJGmlYvYMgW jBY1lpYFyBb6n5niLwGmkFFPPj2GqYyMqwMgUuTY3oxSZg4kp2Xe2itgXF5SEqCLpMK8 Hlt1Aqzfb2rTcFpeDgB+P5NkBgLUPkXEjyKMd3VvzOAPqVQn57iBq3buwTtXsDovjaYG E92gaBFhn2z8I0+fopn6eIJenjlbTJKmcA7sTXn19L/bPPB2UIT7OelBP990lQ6tleUN ZRZcErH6ua6RZ/zS1wijAahIqFN/04EpxA7sf8vRgQoP3HqfuKNjYtb/s1s9Z/aoiuuX hHtQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:content-transfer-encoding :mime-version:references:in-reply-to:message-id:date:subject:cc:to :from:dkim-signature; bh=52p6hdj2wo+1GmH7rXLBPTuhOCrQtwAwxzUYNPgkty0=; b=fRbr82Xauu8F+cy4ybuZGVh4Qlcv0HbBwuhWcqJFANNFUDsUKiu+ROnD3hGHgCU7a6 bwH+lnA7h78Eg9ND1DXfz6bRGp+CKN9THtywA+P/B9BDDKIamEB8hBIFYfrHy0T9h/UU lX0d+UfTuQhCyhEJqRt26dfAMNW3kDoR9IW9r3qDqdaWyAbyoy+TF3fHcr7cZ2mw4X57 uHMnG+rY/x+47zfNTx7exbRY5lOFLIOdTTgNH63u6d3ggpM6p4tTDjfspN3x6zJ2x+Fo OJmFSUHhmaJoSrm+G4I3POAN4aB+Xy2mT7E98qFnQM/Qz7baiYVBe3V6niGjx23rDJBs dUsg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=MAV5xQKp; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id q7-20020a056830440700b0067075185728si37892551otv.204.2023.01.19.23.20.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 Jan 2023 23:20:40 -0800 (PST) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=MAV5xQKp; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id CC489856BB; Fri, 20 Jan 2023 08:18:53 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="MAV5xQKp"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 2A531856A7; Fri, 20 Jan 2023 08:18:45 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-pj1-x1035.google.com (mail-pj1-x1035.google.com [IPv6:2607:f8b0:4864:20::1035]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 20A30856D8 for ; Fri, 20 Jan 2023 08:18:33 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=sumit.garg@linaro.org Received: by mail-pj1-x1035.google.com with SMTP id b10so4799043pjo.1 for ; Thu, 19 Jan 2023 23:18:32 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=52p6hdj2wo+1GmH7rXLBPTuhOCrQtwAwxzUYNPgkty0=; b=MAV5xQKpNYKcEGCV8X3h8R+uYjtEDaJAX+cwskoLZ7muqFX6i27zK5svIwh44hbnF0 lv/rW5TVBU+5p/hAuFj5frC/1RlnJE6hzxwRsSOQ9aMChfYEPfNFvJWMl0aax/uRJ+RQ GAIzfV69IWcHE3CucbFTQtdbf2unB03pzqpm9mTT7xpwEbswHtTRNwHmj8fp9GbJPhcr vWkBtBxPSSIQeQhAZPTWHH2N1uGWLZ8qNr2nmMNH9VHcy9p6XBO8qw2Ac0RXtpZ+prGx SdwBog0NPO4bWa6ih8QQ/DZFAdmIjJbyK5rEuuYRTMkXsHCs9pHuY49LgvtGiNDyl/t4 /FrQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=52p6hdj2wo+1GmH7rXLBPTuhOCrQtwAwxzUYNPgkty0=; b=PsoX3Eva1Blf5zrR0Kp9aE0KAyPfIfoJeC7bRt8h5bgSgKsTD1hJThe35XcqFt/VLh gQIbixRWvld3dlhsAyHACTucbr72VcNw8VbZ3sWsKQMKUbSQ2FPQj2fApMdcUvwm6+bm wSGRb5X1X0ZMgtCgAzq3N6gawShXHgK8usdx0PQG7BM7RaUueGUkdOD11rP69RTV36WN ajN/eEytAHl5jN1Xu43b7ioVC0OP8HrFvI+5AGc554q8Ie9Pv/Koad1HAicjOL+ZnphJ TqqxqAuBi55SX87WFtUjQ/D8TygOmMnsS60tlmRR1AbHgs34mrr1KkfxqwWyVQ5MAwYW Hbbg== X-Gm-Message-State: AFqh2kqs8u3POY37xlSv7SvpSQXzQuCAEf/Fmk0EiG81EfPTdqZQIB7o JbpQ/BRjGwySoJVpslTbL1iYery28HyK++Y6 X-Received: by 2002:a05:6a20:3d09:b0:b8:6fe8:5ed7 with SMTP id y9-20020a056a203d0900b000b86fe85ed7mr19374205pzi.44.1674199111023; Thu, 19 Jan 2023 23:18:31 -0800 (PST) Received: from sumit-X1.. ([223.178.212.120]) by smtp.gmail.com with ESMTPSA id x15-20020aa7956f000000b0058bacd6c4e8sm9797586pfq.207.2023.01.19.23.18.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 19 Jan 2023 23:18:30 -0800 (PST) From: Sumit Garg To: u-boot@lists.denx.de Cc: rfried.dev@gmail.com, hs@denx.de, joe.hershberger@ni.com, stephan@gerhold.net, mworsfold@impinj.com, lgillham@impinj.com, jbrennan@impinj.com, nicolas.dechesne@linaro.org, vinod.koul@linaro.org, daniel.thompson@linaro.org, Sumit Garg Subject: [PATCH 13/14] i2c: Add support for Qualcomm I2C driver Date: Fri, 20 Jan 2023 12:47:18 +0530 Message-Id: <20230120071719.623661-14-sumit.garg@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230120071719.623661-1-sumit.garg@linaro.org> References: <20230120071719.623661-1-sumit.garg@linaro.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean Add support for Qualcomm I2C QUP driver which is inspired from corresponding driver in Linux: drivers/i2c/busses/i2c-qup.c. Currently this driver only support FIFO polling mode which is sufficient to support devices like eeprom, rtc etc. Co-developed-by: Mike Worsfold Signed-off-by: Mike Worsfold Signed-off-by: Sumit Garg --- drivers/i2c/Kconfig | 6 + drivers/i2c/Makefile | 1 + drivers/i2c/qup_i2c.c | 592 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 599 insertions(+) create mode 100644 drivers/i2c/qup_i2c.c diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 76e19918aa..2a1d36f91a 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -635,6 +635,12 @@ config SYS_I2C_TEGRA help Support for NVIDIA I2C controller available in Tegra SoCs. +config SYS_I2C_QUP + bool "Qualcomm I2C controller" + depends on ARCH_SNAPDRAGON + help + Support for Qualcomm I2C controller. + config SYS_I2C_UNIPHIER bool "UniPhier I2C driver" depends on ARCH_UNIPHIER && DM_I2C diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 920aafb91c..f6aa39dd7a 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_SYS_I2C_SUN6I_P2WI) += sun6i_p2wi.o obj-$(CONFIG_SYS_I2C_SUN8I_RSB) += sun8i_rsb.o obj-$(CONFIG_SYS_I2C_SYNQUACER) += synquacer_i2c.o obj-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o +obj-$(CONFIG_SYS_I2C_QUP) += qup_i2c.o obj-$(CONFIG_SYS_I2C_UNIPHIER) += i2c-uniphier.o obj-$(CONFIG_SYS_I2C_UNIPHIER_F) += i2c-uniphier-f.o obj-$(CONFIG_SYS_I2C_VERSATILE) += i2c-versatile.o diff --git a/drivers/i2c/qup_i2c.c b/drivers/i2c/qup_i2c.c new file mode 100644 index 0000000000..6787fc75fc --- /dev/null +++ b/drivers/i2c/qup_i2c.c @@ -0,0 +1,592 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2009-2013, 2016-2018, The Linux Foundation. All rights reserved. + * Copyright (c) 2014, Sony Mobile Communications AB. + * Copyright (c) 2022-2023, Sumit Garg + * + * Inspired by corresponding driver in Linux: drivers/i2c/busses/i2c-qup.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* QUP Registers */ +#define QUP_CONFIG 0x000 +#define QUP_STATE 0x004 +#define QUP_IO_MODE 0x008 +#define QUP_SW_RESET 0x00c +#define QUP_OPERATIONAL 0x018 +#define QUP_ERROR_FLAGS 0x01c +#define QUP_ERROR_FLAGS_EN 0x020 +#define QUP_TEST_CTRL 0x024 /* NOT USED */ +#define QUP_OPERATIONAL_MASK 0x028 +#define QUP_HW_VERSION 0x030 +#define QUP_MX_OUTPUT_CNT 0x100 +#define QUP_OUT_DEBUG 0x108 /* NOT USED */ +#define QUP_OUT_FIFO_CNT 0x10C /* NOT USED */ +#define QUP_OUT_FIFO_BASE 0x110 +#define QUP_MX_WRITE_CNT 0x150 +#define QUP_MX_INPUT_CNT 0x200 +#define QUP_MX_READ_CNT 0x208 +#define QUP_IN_READ_CUR 0x20C /* NOT USED */ +#define QUP_IN_DEBUG 0x210 /* NOT USED */ +#define QUP_IN_FIFO_CNT 0x214 /* NOT USED */ +#define QUP_IN_FIFO_BASE 0x218 +#define QUP_I2C_CLK_CTL 0x400 +#define QUP_I2C_STATUS 0x404 +#define QUP_I2C_MASTER_GEN 0x408 +#define QUP_I2C_MASTER_BUS_CLR 0x40C /* NOT USED */ + +/* QUP States and reset values */ +#define QUP_RESET_STATE 0 +#define QUP_RUN_STATE 1 +#define QUP_PAUSE_STATE 3 +#define QUP_STATE_MASK 3 + +#define QUP_STATE_VALID BIT(2) +#define QUP_I2C_MAST_GEN BIT(4) +#define QUP_I2C_FLUSH BIT(6) + +#define QUP_OPERATIONAL_RESET 0x000ff0 +#define QUP_I2C_STATUS_RESET 0xfffffc + +/* QUP OPERATIONAL FLAGS */ +#define QUP_I2C_NACK_FLAG BIT(3) +#define QUP_OUT_NOT_EMPTY BIT(4) +#define QUP_IN_NOT_EMPTY BIT(5) +#define QUP_OUT_FULL BIT(6) +#define QUP_OUT_SVC_FLAG BIT(8) +#define QUP_IN_SVC_FLAG BIT(9) +#define QUP_MX_OUTPUT_DONE BIT(10) +#define QUP_MX_INPUT_DONE BIT(11) +#define OUT_BLOCK_WRITE_REQ BIT(12) +#define IN_BLOCK_READ_REQ BIT(13) + +/* I2C mini core related values */ +#define QUP_NO_OUTPUT BIT(6) +#define QUP_NO_INPUT BIT(7) +#define QUP_CLOCK_AUTO_GATE BIT(13) +#define I2C_MINI_CORE (2 << 8) +#define I2C_N_VAL 15 +#define I2C_N_VAL_V2 7 + +/* Most significant word offset in FIFO port */ +#define QUP_MSW_SHIFT (I2C_N_VAL + 1) + +/* Packing/Unpacking words in FIFOs, and IO modes */ +#define QUP_OUTPUT_BLK_MODE BIT(10) +#define QUP_OUTPUT_BAM_MODE (BIT(10) | BIT(11)) +#define QUP_INPUT_BLK_MODE BIT(12) +#define QUP_INPUT_BAM_MODE (BIT(12) | BIT(13)) +#define QUP_BAM_MODE (QUP_OUTPUT_BAM_MODE | QUP_INPUT_BAM_MODE) +#define QUP_BLK_MODE (QUP_OUTPUT_BLK_MODE | QUP_INPUT_BLK_MODE) +#define QUP_UNPACK_EN BIT(14) +#define QUP_PACK_EN BIT(15) + +#define QUP_REPACK_EN (QUP_UNPACK_EN | QUP_PACK_EN) +#define QUP_V2_TAGS_EN 1 + +#define QUP_OUTPUT_BLOCK_SIZE(x) (((x) >> 0) & 0x03) +#define QUP_OUTPUT_FIFO_SIZE(x) (((x) >> 2) & 0x07) +#define QUP_INPUT_BLOCK_SIZE(x) (((x) >> 5) & 0x03) +#define QUP_INPUT_FIFO_SIZE(x) (((x) >> 7) & 0x07) + +/* QUP v2 tags */ +#define QUP_TAG_V2_START 0x81 +#define QUP_TAG_V2_DATAWR 0x82 +#define QUP_TAG_V2_DATAWR_STOP 0x83 +#define QUP_TAG_V2_DATARD 0x85 +#define QUP_TAG_V2_DATARD_NACK 0x86 +#define QUP_TAG_V2_DATARD_STOP 0x87 + +/* Status, Error flags */ +#define I2C_STATUS_WR_BUFFER_FULL BIT(0) +#define I2C_STATUS_BUS_ERROR BIT(2) +#define I2C_STATUS_PACKET_NACKED BIT(3) +#define I2C_STATUS_ARB_LOST BIT(4) +#define I2C_STATUS_INVALID_WRITE BIT(5) +#define I2C_STATUS_FAILED BIT(6) +#define I2C_STATUS_BUS_ACTIVE BIT(8) +#define I2C_STATUS_BUS_MASTER BIT(9) +#define I2C_STATUS_INVALID_TAG BIT(23) +#define I2C_STATUS_INVALID_READ_ADDR BIT(24) +#define I2C_STATUS_INVALID_READ_SEQ BIT(25) +#define I2C_STATUS_I2C_SDA BIT(26) +#define I2C_STATUS_I2C_SCL BIT(27) +#define I2C_STATUS_ERROR_MASK 0x38000fc +#define QUP_STATUS_ERROR_FLAGS 0x7c + +#define QUP_I2C_MX_CONFIG_DURING_RUN BIT(31) + +/* Minimum transfer timeout for i2c transfers in micro seconds */ +#define TOUT_CNT 2 * 1000 * 1000 + +/* Default values. Use these if FW query fails */ +#define DEFAULT_CLK_FREQ I2C_SPEED_STANDARD_RATE +#define DEFAULT_SRC_CLK 19200000 + +/* + * Max tags length (start, stop and maximum 2 bytes address) for each QUP + * data transfer + */ +#define QUP_MAX_TAGS_LEN 4 +/* Max data length for each DATARD tags */ +#define RECV_MAX_DATA_LEN 254 +/* TAG length for DATA READ in RX FIFO */ +#define READ_RX_TAGS_LEN 2 + +struct qup_i2c_priv { + phys_addr_t base; + struct clk core; + struct clk iface; + u32 in_fifo_sz; + u32 out_fifo_sz; + u32 clk_ctl; + u32 config_run; +}; + +static inline u8 i2c_8bit_addr_from_msg(const struct i2c_msg *msg) +{ + return (msg->addr << 1) | (msg->flags & I2C_M_RD ? 1 : 0); +} + +static int qup_i2c_poll_state_mask(struct qup_i2c_priv *qup, + u32 req_state, u32 req_mask) +{ + int retries = 1; + u32 state; + + /* + * State transition takes 3 AHB clocks cycles + 3 I2C master clock + * cycles. So retry once after a 1uS delay. + */ + do { + state = readl(qup->base + QUP_STATE); + + if (state & QUP_STATE_VALID && + (state & req_mask) == req_state) + return 0; + + udelay(1); + } while (retries--); + + return -ETIMEDOUT; +} + +static int qup_i2c_poll_state(struct qup_i2c_priv *qup, u32 req_state) +{ + return qup_i2c_poll_state_mask(qup, req_state, QUP_STATE_MASK); +} + +static int qup_i2c_poll_state_valid(struct qup_i2c_priv *qup) +{ + return qup_i2c_poll_state_mask(qup, 0, 0); +} + +static int qup_i2c_poll_state_i2c_master(struct qup_i2c_priv *qup) +{ + return qup_i2c_poll_state_mask(qup, QUP_I2C_MAST_GEN, QUP_I2C_MAST_GEN); +} + +static int qup_i2c_change_state(struct qup_i2c_priv *qup, u32 state) +{ + if (qup_i2c_poll_state_valid(qup) != 0) + return -EIO; + + writel(state, qup->base + QUP_STATE); + + if (qup_i2c_poll_state(qup, state) != 0) + return -EIO; + return 0; +} + +/* + * Function to check wheather Input or Output FIFO + * has data to be serviced + */ +static int qup_i2c_check_fifo_status(struct qup_i2c_priv *qup, u32 reg_addr, + u32 flags) +{ + unsigned long count = TOUT_CNT; + u32 val, status_flag; + int ret = 0; + + do { + val = readl(qup->base + reg_addr); + status_flag = val & flags; + + if (!count) { + printf("%s, timeout\n", __func__); + ret = -ETIMEDOUT; + break; + } + + count--; + udelay(1); + } while (!status_flag); + + return ret; +} + +/* + * Function to configure Input and Output enable/disable + */ +static void qup_i2c_enable_io_config(struct qup_i2c_priv *qup, u32 write_cnt, + u32 read_cnt) +{ + u32 qup_config = I2C_MINI_CORE | I2C_N_VAL_V2; + + writel(qup->config_run | write_cnt, qup->base + QUP_MX_WRITE_CNT); + + if (read_cnt) + writel(qup->config_run | read_cnt, qup->base + QUP_MX_READ_CNT); + else + qup_config |= QUP_NO_INPUT; + + writel(qup_config, qup->base + QUP_CONFIG); +} + +static unsigned int qup_i2c_read_word(struct qup_i2c_priv *qup) +{ + return readl(qup->base + QUP_IN_FIFO_BASE); +} + +static void qup_i2c_write_word(struct qup_i2c_priv *qup, u32 word) +{ + writel(word, qup->base + QUP_OUT_FIFO_BASE); +} + +static int qup_i2c_blsp_read(struct qup_i2c_priv *qup, unsigned int addr, + bool last, u8 *buffer, unsigned int bytes) +{ + unsigned int i, j, word; + int ret = 0; + + /* FIFO mode size limitation, for larger size implement block mode */ + if (bytes > (qup->in_fifo_sz - READ_RX_TAGS_LEN)) + return -EINVAL; + + qup_i2c_enable_io_config(qup, QUP_MAX_TAGS_LEN, + bytes + READ_RX_TAGS_LEN); + + if (last) + qup_i2c_write_word(qup, QUP_TAG_V2_START | addr << 8 | + QUP_TAG_V2_DATARD_STOP << 16 | + bytes << 24); + else + qup_i2c_write_word(qup, QUP_TAG_V2_START | addr << 8 | + QUP_TAG_V2_DATARD << 16 | bytes << 24); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + return ret; + + ret = qup_i2c_check_fifo_status(qup, QUP_OPERATIONAL, QUP_OUT_SVC_FLAG); + if (ret) + return ret; + writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL); + + ret = qup_i2c_check_fifo_status(qup, QUP_OPERATIONAL, QUP_IN_SVC_FLAG); + if (ret) + return ret; + writel(QUP_IN_SVC_FLAG, qup->base + QUP_OPERATIONAL); + + word = qup_i2c_read_word(qup); + *(buffer++) = (word >> (8 * READ_RX_TAGS_LEN)) & 0xff; + if (bytes > 1) + *(buffer++) = (word >> (8 * (READ_RX_TAGS_LEN + 1))) & 0xff; + + for (i = 2; i < bytes; i += 4) { + word = qup_i2c_read_word(qup); + + for (j = 0; j < 4; j++) { + if ((i + j) == bytes) + break; + *buffer = (word >> (j * 8)) & 0xff; + buffer++; + } + } + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + return ret; +} + +static int qup_i2c_blsp_write(struct qup_i2c_priv *qup, unsigned int addr, + bool first, bool last, const u8 *buffer, + unsigned int bytes) +{ + unsigned int i; + u32 word = 0; + int ret = 0; + + /* FIFO mode size limitation, for larger size implement block mode */ + if (bytes > (qup->out_fifo_sz - QUP_MAX_TAGS_LEN)) + return -EINVAL; + + qup_i2c_enable_io_config(qup, bytes + QUP_MAX_TAGS_LEN, 0); + + if (first) { + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + return ret; + + writel(qup->clk_ctl, qup->base + QUP_I2C_CLK_CTL); + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + if (ret) + return ret; + } + + if (last) + qup_i2c_write_word(qup, QUP_TAG_V2_START | addr << 8 | + QUP_TAG_V2_DATAWR_STOP << 16 | + bytes << 24); + else + qup_i2c_write_word(qup, QUP_TAG_V2_START | addr << 8 | + QUP_TAG_V2_DATAWR << 16 | bytes << 24); + + for (i = 0; i < bytes; i++) { + /* Write the byte of data */ + word |= *buffer << ((i % 4) * 8); + if ((i % 4) == 3) { + qup_i2c_write_word(qup, word); + word = 0; + } + buffer++; + } + + if ((i % 4) != 0) + qup_i2c_write_word(qup, word); + + ret = qup_i2c_change_state(qup, QUP_RUN_STATE); + if (ret) + return ret; + + ret = qup_i2c_check_fifo_status(qup, QUP_OPERATIONAL, QUP_OUT_SVC_FLAG); + if (ret) + return ret; + writel(QUP_OUT_SVC_FLAG, qup->base + QUP_OPERATIONAL); + + ret = qup_i2c_change_state(qup, QUP_PAUSE_STATE); + return ret; +} + +static void qup_i2c_conf_mode_v2(struct qup_i2c_priv *qup) +{ + u32 io_mode = QUP_REPACK_EN; + + writel(0, qup->base + QUP_MX_OUTPUT_CNT); + writel(0, qup->base + QUP_MX_INPUT_CNT); + + writel(io_mode, qup->base + QUP_IO_MODE); +} + +static int qup_i2c_xfer_v2(struct udevice *bus, struct i2c_msg msgs[], int num) +{ + struct qup_i2c_priv *qup = dev_get_priv(bus); + int ret, idx = 0; + u32 i2c_addr; + + writel(1, qup->base + QUP_SW_RESET); + ret = qup_i2c_poll_state(qup, QUP_RESET_STATE); + if (ret) + goto out; + + /* Configure QUP as I2C mini core */ + writel(I2C_MINI_CORE | I2C_N_VAL_V2 | QUP_NO_INPUT, + qup->base + QUP_CONFIG); + writel(QUP_V2_TAGS_EN, qup->base + QUP_I2C_MASTER_GEN); + + if (qup_i2c_poll_state_i2c_master(qup)) { + ret = -EIO; + goto out; + } + + qup_i2c_conf_mode_v2(qup); + + for (idx = 0; idx < num; idx++) { + struct i2c_msg *m = &msgs[idx]; + + qup->config_run = !idx ? 0 : QUP_I2C_MX_CONFIG_DURING_RUN; + i2c_addr = i2c_8bit_addr_from_msg(m); + + if (m->flags & I2C_M_RD) + ret = qup_i2c_blsp_read(qup, i2c_addr, idx == (num - 1), + m->buf, m->len); + else + ret = qup_i2c_blsp_write(qup, i2c_addr, idx == 0, + idx == (num - 1), m->buf, + m->len); + if (ret) + break; + } +out: + qup_i2c_change_state(qup, QUP_RESET_STATE); + return ret; +} + +static int qup_i2c_enable_clocks(struct udevice *dev, struct qup_i2c_priv *qup) +{ + int ret; + + ret = clk_enable(&qup->core); + if (ret) { + dev_err(dev, "clk_enable failed %d\n", ret); + return ret; + } + + ret = clk_enable(&qup->iface); + if (ret) { + dev_err(dev, "clk_enable failed %d\n", ret); + return ret; + } + + return 0; +} + +static int qup_i2c_probe(struct udevice *dev) +{ + static const int blk_sizes[] = {4, 16, 32}; + struct qup_i2c_priv *qup = dev_get_priv(dev); + u32 io_mode, hw_ver, size, size_idx; + int ret; + + qup->base = (phys_addr_t)dev_read_addr_ptr(dev); + if (!qup->base) + return -EINVAL; + + ret = clk_get_by_name(dev, "core", &qup->core); + if (ret) { + pr_err("clk_get_by_name(core) failed: %d\n", ret); + return ret; + } + ret = clk_get_by_name(dev, "iface", &qup->iface); + if (ret) { + pr_err("clk_get_by_name(iface) failed: %d\n", ret); + return ret; + } + qup_i2c_enable_clocks(dev, qup); + + writel(1, qup->base + QUP_SW_RESET); + ret = qup_i2c_poll_state_valid(qup); + if (ret) + return ret; + + hw_ver = readl(qup->base + QUP_HW_VERSION); + dev_dbg(dev, "Revision %x\n", hw_ver); + + io_mode = readl(qup->base + QUP_IO_MODE); + + /* + * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag' + * associated with each byte written/received + */ + size_idx = QUP_OUTPUT_BLOCK_SIZE(io_mode); + if (size_idx >= ARRAY_SIZE(blk_sizes)) { + ret = -EIO; + return ret; + } + size = QUP_OUTPUT_FIFO_SIZE(io_mode); + qup->out_fifo_sz = blk_sizes[size_idx] * (2 << size); + + size_idx = QUP_INPUT_BLOCK_SIZE(io_mode); + if (size_idx >= ARRAY_SIZE(blk_sizes)) { + ret = -EIO; + return ret; + } + size = QUP_INPUT_FIFO_SIZE(io_mode); + qup->in_fifo_sz = blk_sizes[size_idx] * (2 << size); + + dev_dbg(dev, "IN:fifo:%d, OUT:fifo:%d\n", qup->in_fifo_sz, + qup->out_fifo_sz); + + return 0; +} + +static int qup_i2c_set_bus_speed(struct udevice *dev, unsigned int clk_freq) +{ + struct qup_i2c_priv *qup = dev_get_priv(dev); + unsigned int src_clk_freq; + int fs_div, hs_div; + + /* We support frequencies up to FAST Mode Plus (1MHz) */ + if (!clk_freq || clk_freq > I2C_SPEED_FAST_PLUS_RATE) { + dev_err(dev, "clock frequency not supported %d\n", clk_freq); + return -EINVAL; + } + + src_clk_freq = clk_get_rate(&qup->iface); + if ((int)src_clk_freq < 0) { + src_clk_freq = DEFAULT_SRC_CLK; + dev_dbg(dev, "using default core freq %d\n", src_clk_freq); + } + + dev_dbg(dev, "src_clk_freq %u\n", src_clk_freq); + dev_dbg(dev, "clk_freq %u\n", clk_freq); + + hs_div = 3; + if (clk_freq <= I2C_SPEED_STANDARD_RATE) { + fs_div = ((src_clk_freq / clk_freq) / 2) - 3; + qup->clk_ctl = (hs_div << 8) | (fs_div & 0xff); + } else { + /* 33%/66% duty cycle */ + fs_div = ((src_clk_freq / clk_freq) - 6) * 2 / 3; + qup->clk_ctl = ((fs_div / 2) << 16) | (hs_div << 8) | (fs_div & 0xff); + } + + dev_dbg(dev, "clk_ctl %u\n", qup->clk_ctl); + + return 0; +} + +/* Probe to see if a chip is present. */ +static int qup_i2c_probe_chip(struct udevice *dev, uint chip_addr, + uint chip_flags) +{ + struct qup_i2c_priv *qup = dev_get_priv(dev); + u32 hw_ver = readl(qup->base + QUP_HW_VERSION); + + return hw_ver ? 0 : -1; +} + +static const struct dm_i2c_ops qup_i2c_ops = { + .xfer = qup_i2c_xfer_v2, + .probe_chip = qup_i2c_probe_chip, + .set_bus_speed = qup_i2c_set_bus_speed, +}; + +static const struct udevice_id qup_i2c_ids[] = { + { .compatible = "qcom,i2c-qup-v2.1.1" }, + { .compatible = "qcom,i2c-qup-v2.2.1" }, + { .compatible = "qcom,i2c-qup" }, + {} +}; + +U_BOOT_DRIVER(i2c_qup) = { + .name = "i2c_qup", + .id = UCLASS_I2C, + .of_match = qup_i2c_ids, + .probe = qup_i2c_probe, + .priv_auto = sizeof(struct qup_i2c_priv), + .ops = &qup_i2c_ops, +};