diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5aaf7e5e32af..faccfaf720a8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1067,6 +1067,7 @@ config ARCH_SNAPDRAGON
 	select DM
 	select DM_GPIO
 	select DM_SERIAL
+	select DM_RESET
 	select GPIO_EXTRA_HEADER
 	select MSM_SMEM
 	select OF_CONTROL
diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi
index 0850ae56e9a8..f9489e42ea2c 100644
--- a/arch/arm/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/dts/qcom-ipq4019.dtsi
@@ -66,14 +66,6 @@
 			status = "disabled";
 		};
 
-		reset: gcc-reset@1800000 {
-			compatible = "qcom,gcc-reset-ipq4019";
-			reg = <0x1800000 0x60000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			bootph-all;
-		};
-
 		soc_gpios: pinctrl@1000000 {
 			compatible = "qcom,ipq4019-pinctrl";
 			reg = <0x1000000 0x300000>;
@@ -136,7 +128,7 @@
 			#phy-cells = <0>;
 			reg = <0x9a000 0x800>;
 			reg-names = "phy_base";
-			resets = <&reset USB3_UNIPHY_PHY_ARES>;
+			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
 			reset-names = "por_rst";
 			status = "disabled";
 		};
@@ -146,7 +138,7 @@
 			#phy-cells = <0>;
 			reg = <0xa6000 0x40>;
 			reg-names = "phy_base";
-			resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>;
+			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
 			reset-names = "por_rst", "srif_rst";
 			status = "disabled";
 		};
@@ -179,7 +171,7 @@
 			#phy-cells = <0>;
 			reg = <0xa8000 0x40>;
 			reg-names = "phy_base";
-			resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>;
+			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
 			reset-names = "por_rst", "srif_rst";
 			status = "disabled";
 		};
diff --git a/arch/arm/dts/qcs404-evb.dts b/arch/arm/dts/qcs404-evb.dts
index 8d7893c11695..84224a8a3d39 100644
--- a/arch/arm/dts/qcs404-evb.dts
+++ b/arch/arm/dts/qcs404-evb.dts
@@ -208,11 +208,6 @@
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			#clock-cells = <1>;
-		};
-
-		reset: gcc-reset@1800000 {
-			compatible = "qcom,gcc-reset-qcs404";
-			reg = <0x1800000 0x80000>;
 			#reset-cells = <1>;
 		};
 
@@ -245,8 +240,8 @@
 			clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
 			clock-names = "ahb", "pipe";
-			resets = <&reset GCC_USB3_PHY_BCR>,
-				 <&reset GCC_USB3PHY_PHY_BCR>;
+			resets = <&gcc GCC_USB3_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_BCR>;
 			reset-names = "com", "phy";
 		};
 
@@ -257,8 +252,8 @@
 			clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 			clock-names = "ahb", "sleep";
-			resets = <&reset GCC_USB_HS_PHY_CFG_AHB_BCR>,
-				 <&reset GCC_USB2A_PHY_BCR>;
+			resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>,
+				 <&gcc GCC_USB2A_PHY_BCR>;
 			reset-names = "phy", "por";
 		};
 
@@ -269,8 +264,8 @@
 			clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>,
 				 <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
 			clock-names = "ahb", "sleep";
-			resets = <&reset GCC_QUSB2_PHY_BCR>,
-				 <&reset GCC_USB2_HS_PHY_ONLY_BCR>;
+			resets = <&gcc GCC_QUSB2_PHY_BCR>,
+				 <&gcc GCC_USB2_HS_PHY_ONLY_BCR>;
 			reset-names = "phy", "por";
 		};
 
@@ -335,7 +330,7 @@
 				 <&gcc GCC_ETH_PTP_CLK>,
 				 <&gcc GCC_ETH_RGMII_CLK>;
 
-			resets = <&reset GCC_EMAC_BCR>;
+			resets = <&gcc GCC_EMAC_BCR>;
 			reset-names = "emac";
 
 			snps,tso;
diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 90f2a93d9ed5..e3b9b8c1b91b 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -13,6 +13,7 @@
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+
 #include "clock-qcom.h"
 
 /* GPLL0 clock control registers */
@@ -49,7 +50,7 @@ static struct vote_clk gcc_blsp1_ahb_clk = {
 };
 
 /* SDHCI */
-static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
+static int clk_init_sdc(struct qcom_cc_priv *priv, int slot, uint rate)
 {
 	int div = 8; /* 100MHz default */
 
@@ -75,7 +76,7 @@ static const struct bcr_regs uart2_regs = {
 };
 
 /* UART: 115200 */
-static int clk_init_uart(struct msm_clk_priv *priv)
+static int clk_init_uart(struct qcom_cc_priv *priv)
 {
 	/* Enable AHB clock */
 	clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk);
@@ -95,7 +96,7 @@ static int clk_init_uart(struct msm_clk_priv *priv)
 
 ulong msm_set_rate(struct clk *clk, ulong rate)
 {
-	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+	struct qcom_cc_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
 	case 0: /* SDC1 */
@@ -116,3 +117,19 @@ int msm_enable(struct clk *clk)
 {
 	return 0;
 }
+
+static const struct udevice_id gcc_apq8016_of_match[] = {
+	{
+		.compatible = "qcom,gcc-apq8016",
+		/* TODO: add reset map */
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_apq8016) = {
+	.name		= "gcc_apq8016",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_apq8016_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
index d5388c69aefe..dc64d11ca979 100644
--- a/drivers/clk/qcom/clock-apq8096.c
+++ b/drivers/clk/qcom/clock-apq8096.c
@@ -41,7 +41,7 @@ static struct vote_clk gcc_blsp2_ahb_clk = {
 	.vote_bit = BIT(15),
 };
 
-static int clk_init_sdc(struct msm_clk_priv *priv, uint rate)
+static int clk_init_sdc(struct qcom_cc_priv *priv, uint rate)
 {
 	int div = 3;
 
@@ -62,7 +62,7 @@ static const struct bcr_regs uart2_regs = {
 	.D = BLSP2_UART2_APPS_D,
 };
 
-static int clk_init_uart(struct msm_clk_priv *priv)
+static int clk_init_uart(struct qcom_cc_priv *priv)
 {
 	/* Enable AHB clock */
 	clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk);
@@ -82,7 +82,7 @@ static int clk_init_uart(struct msm_clk_priv *priv)
 
 ulong msm_set_rate(struct clk *clk, ulong rate)
 {
-	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+	struct qcom_cc_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
 	case 0: /* SDC1 */
@@ -99,3 +99,19 @@ int msm_enable(struct clk *clk)
 {
 	return 0;
 }
+
+static const struct udevice_id gcc_apq8096_of_match[] = {
+	{
+		.compatible = "qcom,gcc-apq8096",
+		/* TODO: add reset map */
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_apq8096) = {
+	.name		= "gcc_apq8096",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_apq8096_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c
index 04c99964df15..6636af98132d 100644
--- a/drivers/clk/qcom/clock-ipq4019.c
+++ b/drivers/clk/qcom/clock-ipq4019.c
@@ -13,6 +13,7 @@
 #include <dm.h>
 #include <errno.h>
 #include <dt-bindings/clock/qcom,ipq4019-gcc.h>
+#include <dt-bindings/reset/qcom,ipq4019-reset.h>
 
 #include "clock-qcom.h"
 
@@ -49,3 +50,97 @@ int msm_enable(struct clk *clk)
 	}
 }
 
+static const struct qcom_reset_map gcc_ipq4019_resets[] = {
+	[WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 },
+	[WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 },
+	[WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 },
+	[WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 },
+	[WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 },
+	[WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 },
+	[WIFI1_CPU_INIT_RESET] = { 0x20008, 5 },
+	[WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 },
+	[WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 },
+	[WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 },
+	[WIFI1_CORE_WARM_RESET] = { 0x20008, 1 },
+	[WIFI1_CORE_COLD_RESET] = { 0x20008, 0 },
+	[USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 },
+	[USB3_HSPHY_POR_ARES] = { 0x1e038, 4 },
+	[USB3_HSPHY_S_ARES] = { 0x1e038, 2 },
+	[USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 },
+	[USB2_HSPHY_S_ARES] = { 0x1e01c, 2 },
+	[PCIE_PHY_AHB_ARES] = { 0x1d010, 11 },
+	[PCIE_AHB_ARES] = { 0x1d010, 10 },
+	[PCIE_PWR_ARES] = { 0x1d010, 9 },
+	[PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 },
+	[PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 },
+	[PCIE_PHY_ARES] = { 0x1d010, 6 },
+	[PCIE_PARF_XPU_ARES] = { 0x1d010, 5 },
+	[PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 },
+	[PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 },
+	[PCIE_PIPE_ARES] = { 0x1d010, 2 },
+	[PCIE_AXI_S_ARES] = { 0x1d010, 1 },
+	[PCIE_AXI_M_ARES] = { 0x1d010, 0 },
+	[ESS_RESET] = { 0x12008, 0},
+	[GCC_BLSP1_BCR] = {0x01000, 0},
+	[GCC_BLSP1_QUP1_BCR] = {0x02000, 0},
+	[GCC_BLSP1_UART1_BCR] = {0x02038, 0},
+	[GCC_BLSP1_QUP2_BCR] = {0x03008, 0},
+	[GCC_BLSP1_UART2_BCR] = {0x03028, 0},
+	[GCC_BIMC_BCR] = {0x04000, 0},
+	[GCC_TLMM_BCR] = {0x05000, 0},
+	[GCC_IMEM_BCR] = {0x0E000, 0},
+	[GCC_ESS_BCR] = {0x12008, 0},
+	[GCC_PRNG_BCR] = {0x13000, 0},
+	[GCC_BOOT_ROM_BCR] = {0x13008, 0},
+	[GCC_CRYPTO_BCR] = {0x16000, 0},
+	[GCC_SDCC1_BCR] = {0x18000, 0},
+	[GCC_SEC_CTRL_BCR] = {0x1A000, 0},
+	[GCC_AUDIO_BCR] = {0x1B008, 0},
+	[GCC_QPIC_BCR] = {0x1C000, 0},
+	[GCC_PCIE_BCR] = {0x1D000, 0},
+	[GCC_USB2_BCR] = {0x1E008, 0},
+	[GCC_USB2_PHY_BCR] = {0x1E018, 0},
+	[GCC_USB3_BCR] = {0x1E024, 0},
+	[GCC_USB3_PHY_BCR] = {0x1E034, 0},
+	[GCC_SYSTEM_NOC_BCR] = {0x21000, 0},
+	[GCC_PCNOC_BCR] = {0x2102C, 0},
+	[GCC_DCD_BCR] = {0x21038, 0},
+	[GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0},
+	[GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0},
+	[GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0},
+	[GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0},
+	[GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0},
+	[GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0},
+	[GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0},
+	[GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0},
+	[GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0},
+	[GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0},
+	[GCC_TCSR_BCR] = {0x22000, 0},
+	[GCC_MPM_BCR] = {0x24000, 0},
+	[GCC_SPDM_BCR] = {0x25000, 0},
+};
+
+static struct qcom_cc_data ipq4019_data = {
+	.resets = gcc_ipq4019_resets,
+	.num_resets = ARRAY_SIZE(gcc_ipq4019_resets),
+};
+
+static const struct udevice_id gcc_ipq4019_of_match[] = {
+	{
+		.compatible = "qcom,gcc-ipq4019",
+		.data = (ulong)&ipq4019_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_ipq4019) = {
+	.name		= "gcc_ipq4019",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_ipq4019_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c
index 5667abeb89a4..b0416a05789d 100644
--- a/drivers/clk/qcom/clock-qcom.c
+++ b/drivers/clk/qcom/clock-qcom.c
@@ -1,8 +1,13 @@
-// SPDX-License-Identifier: BSD-3-Clause
+// SPDX-License-Identifier: BSD-3-Clause AND GPL-2.0
 /*
- * Clock drivers for Qualcomm APQ8016, APQ8096
+ * Clock and reset drivers for Qualcomm platforms Global Clock
+ * Controller (GCC).
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ * (C) Copyright 2020 Sartura Ltd. (reset driver)
+ *     Author: Robert Marko <robert.marko@sartura.hr>
+ * (C) Copyright 2022 Linaro Ltd. (reset driver)
+ *     Author: Sumit Garg <sumit.garg@linaro.org>
  *
  * Based on Little Kernel driver, simplified
  */
@@ -10,9 +15,13 @@
 #include <common.h>
 #include <clk-uclass.h>
 #include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include <reset-uclass.h>
+
 #include "clock-qcom.h"
 
 /* CBCR register fields */
@@ -137,12 +146,15 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div,
 
 static int msm_clk_probe(struct udevice *dev)
 {
-	struct msm_clk_priv *priv = dev_get_priv(dev);
+	struct qcom_cc_data *data = (struct qcom_cc_data *)dev_get_driver_data(dev);
+	struct qcom_cc_priv *priv = dev_get_priv(dev);
 
 	priv->base = dev_read_addr(dev);
 	if (priv->base == FDT_ADDR_T_NONE)
 		return -EINVAL;
 
+	priv->data = data;
+
 	return 0;
 }
 
@@ -161,21 +173,97 @@ static struct clk_ops msm_clk_ops = {
 	.enable = msm_clk_enable,
 };
 
-static const struct udevice_id msm_clk_ids[] = {
-	{ .compatible = "qcom,gcc-msm8916" },
-	{ .compatible = "qcom,gcc-apq8016" },
-	{ .compatible = "qcom,gcc-msm8996" },
-	{ .compatible = "qcom,gcc-apq8096" },
-	{ .compatible = "qcom,gcc-sdm845" },
-	{ .compatible = "qcom,gcc-qcs404" },
-	{ }
-};
-
-U_BOOT_DRIVER(clk_msm) = {
-	.name		= "clk_msm",
+U_BOOT_DRIVER(qcom_clk) = {
+	.name		= "qcom_clk",
 	.id		= UCLASS_CLK,
-	.of_match	= msm_clk_ids,
 	.ops		= &msm_clk_ops,
-	.priv_auto	= sizeof(struct msm_clk_priv),
+	.priv_auto	= sizeof(struct qcom_cc_priv),
 	.probe		= msm_clk_probe,
 };
+
+int qcom_cc_bind(struct udevice *parent)
+{
+	struct qcom_cc_data *data = (struct qcom_cc_data *)dev_get_driver_data(parent);
+	struct udevice *clkdev, *rstdev;
+	struct driver *drv;
+	int ret;
+
+	/* Get a handle to the common clk handler */
+	drv = lists_driver_lookup_name("qcom_clk");
+	if (!drv)
+		return -ENOENT;
+
+	/* Register the clock controller */
+	ret = device_bind_with_driver_data(parent, drv, "qcom_clk", (ulong)data,
+					   dev_ofnode(parent), &clkdev);
+	if (ret)
+		return ret;
+
+	/* Bail out early if resets are not specified for this platform */
+	if (!data->resets)
+		return ret;
+
+	/* Get a handle to the common reset handler */
+	drv = lists_driver_lookup_name("qcom_reset");
+	if (!drv)
+		return -ENOENT;
+
+	/* Register the reset controller */
+	ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data,
+					   dev_ofnode(parent), &rstdev);
+	if (ret)
+		device_unbind(clkdev);
+
+	return ret;
+}
+
+static int qcom_reset_set(struct reset_ctl *rst, bool assert)
+{
+	struct qcom_cc_data *data = (struct qcom_cc_data *)dev_get_driver_data(rst->dev);
+	void __iomem *base = dev_get_priv(rst->dev);
+	const struct qcom_reset_map *map;
+	u32 value;
+
+	map = &data->resets[rst->id];
+
+	value = readl(base + map->reg);
+
+	if (assert)
+		value |= BIT(map->bit);
+	else
+		value &= ~BIT(map->bit);
+
+	writel(value, base + map->reg);
+
+	return 0;
+}
+
+static int qcom_reset_assert(struct reset_ctl *rst)
+{
+	return qcom_reset_set(rst, true);
+}
+
+static int qcom_reset_deassert(struct reset_ctl *rst)
+{
+	return qcom_reset_set(rst, false);
+}
+
+static const struct reset_ops qcom_reset_ops = {
+	.rst_assert = qcom_reset_assert,
+	.rst_deassert = qcom_reset_deassert,
+};
+
+static int qcom_reset_probe(struct udevice *dev)
+{
+	/* Set our priv pointer to the base address */
+	dev_set_priv(dev, (void *)dev_read_addr(dev));
+
+	return 0;
+}
+
+U_BOOT_DRIVER(qcom_reset) = {
+	.name = "qcom_reset",
+	.id = UCLASS_RESET,
+	.ops = &qcom_reset_ops,
+	.probe = qcom_reset_probe,
+};
diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h
index c90bbefa5881..a77a94b6ea06 100644
--- a/drivers/clk/qcom/clock-qcom.h
+++ b/drivers/clk/qcom/clock-qcom.h
@@ -1,11 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Qualcomm APQ8016, APQ8096, SDM845
- *
  * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
  */
-#ifndef _CLOCK_SNAPDRAGON_H
-#define _CLOCK_SNAPDRAGON_H
+#ifndef _CLOCK_QCOM_H
+#define _CLOCK_QCOM_H
 
 #define CFG_CLK_SRC_CXO   (0 << 8)
 #define CFG_CLK_SRC_GPLL0 (1 << 8)
@@ -32,10 +30,22 @@ struct bcr_regs {
 	uintptr_t D;
 };
 
-struct msm_clk_priv {
-	phys_addr_t base;
+struct qcom_reset_map {
+	unsigned int reg;
+	u8 bit;
 };
 
+struct qcom_cc_data {
+	const struct qcom_reset_map	*resets;
+	unsigned long			num_resets;
+};
+
+struct qcom_cc_priv {
+	phys_addr_t		base;
+	struct qcom_cc_data	*data;
+};
+
+int qcom_cc_bind(struct udevice *parent);
 void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0);
 void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
 void clk_enable_cbc(phys_addr_t cbcr);
diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c
index 80218af73ef6..e622309b6747 100644
--- a/drivers/clk/qcom/clock-qcs404.c
+++ b/drivers/clk/qcom/clock-qcs404.c
@@ -11,9 +11,10 @@
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include <dt-bindings/clock/qcom,gcc-qcs404.h>
+
 #include "clock-qcom.h"
 
-#include <dt-bindings/clock/qcom,gcc-qcs404.h>
 
 /* GPLL0 clock control registers */
 #define GPLL0_STATUS_ACTIVE BIT(31)
@@ -113,7 +114,7 @@ static const struct bcr_regs blsp1_qup4_i2c_apps_regs = {
 
 ulong msm_set_rate(struct clk *clk, ulong rate)
 {
-	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+	struct qcom_cc_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
 	case GCC_BLSP1_UART2_APPS_CLK:
@@ -158,7 +159,7 @@ ulong msm_set_rate(struct clk *clk, ulong rate)
 
 int msm_enable(struct clk *clk)
 {
-	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+	struct qcom_cc_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
 	case GCC_USB30_MASTER_CLK:
@@ -235,3 +236,50 @@ int msm_enable(struct clk *clk)
 
 	return 0;
 }
+
+static const struct qcom_reset_map qcs404_gcc_resets[] = {
+	[GCC_GENI_IR_BCR] = { 0x0F000 },
+	[GCC_CDSP_RESTART] = { 0x18000 },
+	[GCC_USB_HS_BCR] = { 0x41000 },
+	[GCC_USB2_HS_PHY_ONLY_BCR] = { 0x41034 },
+	[GCC_QUSB2_PHY_BCR] = { 0x4103c },
+	[GCC_USB_HS_PHY_CFG_AHB_BCR] = { 0x0000c, 1 },
+	[GCC_USB2A_PHY_BCR] = { 0x0000c, 0 },
+	[GCC_USB3_PHY_BCR] = { 0x39004 },
+	[GCC_USB_30_BCR] = { 0x39000 },
+	[GCC_USB3PHY_PHY_BCR] = { 0x39008 },
+	[GCC_PCIE_0_BCR] = { 0x3e000 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x3e004 },
+	[GCC_PCIE_0_LINK_DOWN_BCR] = { 0x3e038 },
+	[GCC_PCIEPHY_0_PHY_BCR] = { 0x3e03c },
+	[GCC_PCIE_0_AXI_MASTER_STICKY_ARES] = { 0x3e040, 6},
+	[GCC_PCIE_0_AHB_ARES] = { 0x3e040, 5 },
+	[GCC_PCIE_0_AXI_SLAVE_ARES] = { 0x3e040, 4 },
+	[GCC_PCIE_0_AXI_MASTER_ARES] = { 0x3e040, 3 },
+	[GCC_PCIE_0_CORE_STICKY_ARES] = { 0x3e040, 2 },
+	[GCC_PCIE_0_SLEEP_ARES] = { 0x3e040, 1 },
+	[GCC_PCIE_0_PIPE_ARES] = { 0x3e040, 0 },
+	[GCC_EMAC_BCR] = { 0x4e000 },
+	[GCC_WDSP_RESTART] = {0x19000},
+};
+
+static const struct qcom_cc_data qcs404_gcc_data = {
+	.resets = qcs404_gcc_resets,
+	.num_resets = ARRAY_SIZE(qcs404_gcc_resets),
+};
+
+static const struct udevice_id gcc_qcs404_of_match[] = {
+	{
+		.compatible = "qcom,gcc-qcs404",
+		.data = (ulong)&qcs404_gcc_data
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_qcs404) = {
+	.name		= "gcc_qcs404",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_qcs404_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c
index 95a057b82986..eab88a40c09d 100644
--- a/drivers/clk/qcom/clock-sdm845.c
+++ b/drivers/clk/qcom/clock-sdm845.c
@@ -15,6 +15,7 @@
 #include <asm/io.h>
 #include <linux/bitops.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+
 #include "clock-qcom.h"
 
 #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) }
@@ -70,7 +71,7 @@ const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate)
 	return f - 1;
 }
 
-static int clk_init_uart(struct msm_clk_priv *priv, uint rate)
+static int clk_init_uart(struct qcom_cc_priv *priv, uint rate)
 {
 	const struct freq_tbl *freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate);
 
@@ -82,7 +83,7 @@ static int clk_init_uart(struct msm_clk_priv *priv, uint rate)
 
 ulong msm_set_rate(struct clk *clk, ulong rate)
 {
-	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
+	struct qcom_cc_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
 	case GCC_QUPV3_WRAP1_S1_CLK: /*UART2*/
@@ -96,3 +97,53 @@ int msm_enable(struct clk *clk)
 {
 	return 0;
 }
+
+static const struct qcom_reset_map sdm845_gcc_resets[] = {
+	[GCC_MMSS_BCR] = { 0xb000 },
+	[GCC_PCIE_0_BCR] = { 0x6b000 },
+	[GCC_PCIE_1_BCR] = { 0x8d000 },
+	[GCC_PCIE_PHY_BCR] = { 0x6f000 },
+	[GCC_PDM_BCR] = { 0x33000 },
+	[GCC_PRNG_BCR] = { 0x34000 },
+	[GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 },
+	[GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 },
+	[GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 },
+	[GCC_QUSB2PHY_SEC_BCR] = { 0x12004 },
+	[GCC_SDCC2_BCR] = { 0x14000 },
+	[GCC_SDCC4_BCR] = { 0x16000 },
+	[GCC_TSIF_BCR] = { 0x36000 },
+	[GCC_UFS_CARD_BCR] = { 0x75000 },
+	[GCC_UFS_PHY_BCR] = { 0x77000 },
+	[GCC_USB30_PRIM_BCR] = { 0xf000 },
+	[GCC_USB30_SEC_BCR] = { 0x10000 },
+	[GCC_USB3_PHY_PRIM_BCR] = { 0x50000 },
+	[GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 },
+	[GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 },
+	[GCC_USB3_PHY_SEC_BCR] = { 0x5000c },
+	[GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 },
+	[GCC_USB3_DP_PHY_SEC_BCR] = { 0x50014 },
+	[GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
+	[GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
+	[GCC_PCIE_1_PHY_BCR] = { 0x8e01c },
+};
+
+static const struct qcom_cc_data qcs404_gcc_data = {
+	.resets = sdm845_gcc_resets,
+	.num_resets = ARRAY_SIZE(sdm845_gcc_resets),
+};
+
+static const struct udevice_id gcc_sdm845_of_match[] = {
+	{
+		.compatible = "qcom,gcc-sdm845",
+		.data = (ulong)&qcs404_gcc_data,
+	},
+	{ }
+};
+
+U_BOOT_DRIVER(gcc_sdm845) = {
+	.name		= "gcc_sdm845",
+	.id		= UCLASS_NOP,
+	.of_match	= gcc_sdm845_of_match,
+	.bind		= qcom_cc_bind,
+	.flags		= DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 73bbd3069258..88e04d93f2a0 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -156,13 +156,6 @@ config RESET_IMX7
 	help
 	  Support for reset controller on i.MX7/8 SoCs.
 
-config RESET_QCOM
-	bool "Reset driver for Qualcomm SoCs"
-	depends on DM_RESET && (ARCH_SNAPDRAGON || ARCH_IPQ40XX)
-	default y
-	help
-	  Support for reset controller on Qualcomm SoCs.
-
 config RESET_SIFIVE
 	bool "Reset Driver for SiFive SoC's"
 	depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED)
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index e2239a250a3a..7b0066f80188 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_RESET_MTMIPS) += reset-mtmips.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_RESET_HISILICON) += reset-hisilicon.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
-obj-$(CONFIG_RESET_QCOM) += reset-qcom.o
 obj-$(CONFIG_RESET_SIFIVE) += reset-sifive.o
 obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o
 obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o
diff --git a/drivers/reset/reset-qcom.c b/drivers/reset/reset-qcom.c
deleted file mode 100644
index 94315e76d545..000000000000
--- a/drivers/reset/reset-qcom.c
+++ /dev/null
@@ -1,195 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (c) 2020 Sartura Ltd.
- * Copyright (c) 2022 Linaro Ltd.
- *
- * Author: Robert Marko <robert.marko@sartura.hr>
- *         Sumit Garg <sumit.garg@linaro.org>
- *
- * Based on Linux driver
- */
-
-#include <asm/io.h>
-#include <common.h>
-#include <dm.h>
-#include <reset-uclass.h>
-#include <linux/bitops.h>
-#include <malloc.h>
-
-struct qcom_reset_priv {
-	phys_addr_t base;
-};
-
-struct qcom_reset_map {
-	unsigned int reg;
-	u8 bit;
-};
-
-#ifdef CONFIG_ARCH_IPQ40XX
-#include <dt-bindings/reset/qcom,ipq4019-reset.h>
-static const struct qcom_reset_map gcc_qcom_resets[] = {
-	[WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 },
-	[WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 },
-	[WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 },
-	[WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 },
-	[WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 },
-	[WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 },
-	[WIFI1_CPU_INIT_RESET] = { 0x20008, 5 },
-	[WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 },
-	[WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 },
-	[WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 },
-	[WIFI1_CORE_WARM_RESET] = { 0x20008, 1 },
-	[WIFI1_CORE_COLD_RESET] = { 0x20008, 0 },
-	[USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 },
-	[USB3_HSPHY_POR_ARES] = { 0x1e038, 4 },
-	[USB3_HSPHY_S_ARES] = { 0x1e038, 2 },
-	[USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 },
-	[USB2_HSPHY_S_ARES] = { 0x1e01c, 2 },
-	[PCIE_PHY_AHB_ARES] = { 0x1d010, 11 },
-	[PCIE_AHB_ARES] = { 0x1d010, 10 },
-	[PCIE_PWR_ARES] = { 0x1d010, 9 },
-	[PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 },
-	[PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 },
-	[PCIE_PHY_ARES] = { 0x1d010, 6 },
-	[PCIE_PARF_XPU_ARES] = { 0x1d010, 5 },
-	[PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 },
-	[PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 },
-	[PCIE_PIPE_ARES] = { 0x1d010, 2 },
-	[PCIE_AXI_S_ARES] = { 0x1d010, 1 },
-	[PCIE_AXI_M_ARES] = { 0x1d010, 0 },
-	[ESS_RESET] = { 0x12008, 0},
-	[GCC_BLSP1_BCR] = {0x01000, 0},
-	[GCC_BLSP1_QUP1_BCR] = {0x02000, 0},
-	[GCC_BLSP1_UART1_BCR] = {0x02038, 0},
-	[GCC_BLSP1_QUP2_BCR] = {0x03008, 0},
-	[GCC_BLSP1_UART2_BCR] = {0x03028, 0},
-	[GCC_BIMC_BCR] = {0x04000, 0},
-	[GCC_TLMM_BCR] = {0x05000, 0},
-	[GCC_IMEM_BCR] = {0x0E000, 0},
-	[GCC_ESS_BCR] = {0x12008, 0},
-	[GCC_PRNG_BCR] = {0x13000, 0},
-	[GCC_BOOT_ROM_BCR] = {0x13008, 0},
-	[GCC_CRYPTO_BCR] = {0x16000, 0},
-	[GCC_SDCC1_BCR] = {0x18000, 0},
-	[GCC_SEC_CTRL_BCR] = {0x1A000, 0},
-	[GCC_AUDIO_BCR] = {0x1B008, 0},
-	[GCC_QPIC_BCR] = {0x1C000, 0},
-	[GCC_PCIE_BCR] = {0x1D000, 0},
-	[GCC_USB2_BCR] = {0x1E008, 0},
-	[GCC_USB2_PHY_BCR] = {0x1E018, 0},
-	[GCC_USB3_BCR] = {0x1E024, 0},
-	[GCC_USB3_PHY_BCR] = {0x1E034, 0},
-	[GCC_SYSTEM_NOC_BCR] = {0x21000, 0},
-	[GCC_PCNOC_BCR] = {0x2102C, 0},
-	[GCC_DCD_BCR] = {0x21038, 0},
-	[GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0},
-	[GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0},
-	[GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0},
-	[GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0},
-	[GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0},
-	[GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0},
-	[GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0},
-	[GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0},
-	[GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0},
-	[GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0},
-	[GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0},
-	[GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0},
-	[GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0},
-	[GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0},
-	[GCC_TCSR_BCR] = {0x22000, 0},
-	[GCC_MPM_BCR] = {0x24000, 0},
-	[GCC_SPDM_BCR] = {0x25000, 0},
-};
-#endif
-
-#ifdef CONFIG_TARGET_QCS404EVB
-#include <dt-bindings/clock/qcom,gcc-qcs404.h>
-static const struct qcom_reset_map gcc_qcom_resets[] = {
-	[GCC_GENI_IR_BCR] = { 0x0F000 },
-	[GCC_CDSP_RESTART] = { 0x18000 },
-	[GCC_USB_HS_BCR] = { 0x41000 },
-	[GCC_USB2_HS_PHY_ONLY_BCR] = { 0x41034 },
-	[GCC_QUSB2_PHY_BCR] = { 0x4103c },
-	[GCC_USB_HS_PHY_CFG_AHB_BCR] = { 0x0000c, 1 },
-	[GCC_USB2A_PHY_BCR] = { 0x0000c, 0 },
-	[GCC_USB3_PHY_BCR] = { 0x39004 },
-	[GCC_USB_30_BCR] = { 0x39000 },
-	[GCC_USB3PHY_PHY_BCR] = { 0x39008 },
-	[GCC_PCIE_0_BCR] = { 0x3e000 },
-	[GCC_PCIE_0_PHY_BCR] = { 0x3e004 },
-	[GCC_PCIE_0_LINK_DOWN_BCR] = { 0x3e038 },
-	[GCC_PCIEPHY_0_PHY_BCR] = { 0x3e03c },
-	[GCC_PCIE_0_AXI_MASTER_STICKY_ARES] = { 0x3e040, 6},
-	[GCC_PCIE_0_AHB_ARES] = { 0x3e040, 5 },
-	[GCC_PCIE_0_AXI_SLAVE_ARES] = { 0x3e040, 4 },
-	[GCC_PCIE_0_AXI_MASTER_ARES] = { 0x3e040, 3 },
-	[GCC_PCIE_0_CORE_STICKY_ARES] = { 0x3e040, 2 },
-	[GCC_PCIE_0_SLEEP_ARES] = { 0x3e040, 1 },
-	[GCC_PCIE_0_PIPE_ARES] = { 0x3e040, 0 },
-	[GCC_EMAC_BCR] = { 0x4e000 },
-	[GCC_WDSP_RESTART] = {0x19000},
-};
-#endif
-
-static int qcom_reset_assert(struct reset_ctl *rst)
-{
-	struct qcom_reset_priv *priv = dev_get_priv(rst->dev);
-	const struct qcom_reset_map *reset_map = gcc_qcom_resets;
-	const struct qcom_reset_map *map;
-	u32 value;
-
-	map = &reset_map[rst->id];
-
-	value = readl(priv->base + map->reg);
-	value |= BIT(map->bit);
-	writel(value, priv->base + map->reg);
-
-	return 0;
-}
-
-static int qcom_reset_deassert(struct reset_ctl *rst)
-{
-	struct qcom_reset_priv *priv = dev_get_priv(rst->dev);
-	const struct qcom_reset_map *reset_map = gcc_qcom_resets;
-	const struct qcom_reset_map *map;
-	u32 value;
-
-	map = &reset_map[rst->id];
-
-	value = readl(priv->base + map->reg);
-	value &= ~BIT(map->bit);
-	writel(value, priv->base + map->reg);
-
-	return 0;
-}
-
-static const struct reset_ops qcom_reset_ops = {
-	.rst_assert = qcom_reset_assert,
-	.rst_deassert = qcom_reset_deassert,
-};
-
-static const struct udevice_id qcom_reset_ids[] = {
-	{ .compatible = "qcom,gcc-reset-ipq4019" },
-	{ .compatible = "qcom,gcc-reset-qcs404" },
-	{ }
-};
-
-static int qcom_reset_probe(struct udevice *dev)
-{
-	struct qcom_reset_priv *priv = dev_get_priv(dev);
-
-	priv->base = dev_read_addr(dev);
-	if (priv->base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	return 0;
-}
-
-U_BOOT_DRIVER(qcom_reset) = {
-	.name = "qcom_reset",
-	.id = UCLASS_RESET,
-	.of_match = qcom_reset_ids,
-	.ops = &qcom_reset_ops,
-	.probe = qcom_reset_probe,
-	.priv_auto = sizeof(struct qcom_reset_priv),
-};
