From patchwork Fri Mar 29 17:51:50 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 784078 Delivered-To: patch@linaro.org Received: by 2002:a5d:4e01:0:b0:33e:7753:30bd with SMTP id p1csp3414588wrt; Fri, 29 Mar 2024 14:40:33 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCWBny6w/JEqKqo/qFy/vo3lW+MhHRkwgIDLk79eMHayaXHqFCrOLhpn5tGlIzcBkcZR8lag8IS9TydJSkl9XxoJ X-Google-Smtp-Source: AGHT+IGj4CCSUG5YhemDTAb5uKvJjMwdsUHzUxjDRUrKzAtzPML8xum+umh4bRIU158tX8b3jn2r X-Received: by 2002:adf:e412:0:b0:33e:773c:ff6 with SMTP id g18-20020adfe412000000b0033e773c0ff6mr2795119wrm.46.1711748433570; Fri, 29 Mar 2024 14:40:33 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1711748433; cv=none; d=google.com; s=arc-20160816; b=zfcCceCmzkxWadrL5GFSkj4ZIHmgeH33tySkBB1zsiFjhGnHWVV0ZiPBbQaH9ZvBrT tJ/XzVeXfrX2Jlge/6dj7mdwd45Vn9VnVJRKaeseBacsQrqkr/PrZNrwh9+k+Wpm8zxW 8bkxhJw0fRvROjpFpNmxH6E+YTdnhAPgYjW3cla57/8vku20E3cPrODg7KrdRpCwjygM xOTNTnUfIstNNWYu4m2uhSAlP4L0H6Fanm8qAVJX1HcM7bSiCGGGNx9h7POvUCYo0wlR wrs0IFsHxdAZ6yAF2sPeT61+kL9h4GgqZZJe95C6jL3W42UZqaR8nyyorGTYEkAI0dNl O9sw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=UhhSK3KSIyTGm0tdYAMiiqHyn9qfipUvw9nkvp4SdcI=; fh=sTxu+01mqn4zSb5mqqZ8eQpx4YghFsK76t64St3mbuY=; b=R2Et8cuTB3Hd5+/TYGUShQtVAb1RKBDjH/qVJJcNi7EHcbkS2wwC2fyyQ3E5NhPc1w MXt9GbDQ4WyUJvoBVplIpLgkRR9FUKR62G0L+bsCaM6eTMSyvbpwRIXoL2DWw7dNMMCa r4VxHZISuYwi/SpnouNRNACFOV1E+hNRBaSkd0s82LnHMlsZiomQHLBcnjQFU5D1sm/a LE9GoQjPG/ot8/xCPkukCNuFiLk/euHRXkI+bFTkf6XiDtJnVwoCl2ZpFgwSLCJ4xf0J 3cNq0/JLmqu5PRNIOiYf+yrBUOQMblZO3/NT51CJj8AskeUOd6t5jvafGBSB1ucuSIX/ VKPw==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b="Z+2T4/9+"; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [85.214.62.61]) by mx.google.com with ESMTPS id dk18-20020a0560000b5200b0033e77e43a64si2416641wrb.709.2024.03.29.14.40.32 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 29 Mar 2024 14:40:33 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) client-ip=85.214.62.61; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b="Z+2T4/9+"; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 0DF8A88261; Fri, 29 Mar 2024 22:40:32 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="Z+2T4/9+"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id EFAAB88264; Fri, 29 Mar 2024 18:52:11 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 883ED880A1 for ; Fri, 29 Mar 2024 18:51:58 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=neil.armstrong@linaro.org Received: by mail-wm1-x32d.google.com with SMTP id 5b1f17b1804b1-41553f150b9so3540695e9.1 for ; Fri, 29 Mar 2024 10:51:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1711734718; x=1712339518; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=UhhSK3KSIyTGm0tdYAMiiqHyn9qfipUvw9nkvp4SdcI=; b=Z+2T4/9+pSytzbDhiti33LiIuK5CSGYKaYY7SDobN3mzjcKvksoZh7bZ46t5avL/20 5o5k19iev3itqUagSpMImOulSaNdNBQSlY5q6vttVwiQ6I+/Ddvay9fwkk3VDd4Ysr0M NLiYJmsVkHes792T3QcJjTZiGj9J79lgD1dkS7sXah5dTYbc1oS5Q9Omn0d+kzYp5t5U 2kYROMzyOHLHGjBylqrz/YgHe1xvf45IDHxn/GzEh78QBBC73p+08NC6l1O1/qVrUmiP cFc9V5AS9DwTw7L1a8ivlfG8GjMvn2aEFwqe6L8tPu/KFVC5YsJah5QJhmzjJY2aoMXB ibjQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1711734718; x=1712339518; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=UhhSK3KSIyTGm0tdYAMiiqHyn9qfipUvw9nkvp4SdcI=; b=clp0NSXc+rwm9xLYOeuI8pIGVwP4DptG4tdnFId6deMFMD+vNZEtvUgclM4xWFp8BU tYjOAtK7kA9JT8IvcfWv0WuUlKuL4om2CqRE38xGTGy2UjgSaDi3gymg+OT2lXll21GC hzJDk3iVwCIC0q99UlMnvgoNoKj09g9E1gzh+aRSF5Nt8LNzZ3A75FofU8fpARARk87M 6/5cWqSEcE6lRozGF/FnOcIvk1I3zhj6bHVupbhzjvZ8G/H4gT5Ds0dGsu5n69G6dYrf g6HI1soL1dk0XTfxlOJPPUwR5JXPdM/cnijaj68w0W8mAAZErE1juaT1UKMaICVXC1FJ aDEg== X-Forwarded-Encrypted: i=1; AJvYcCV8GL+TJ8k9vkE23+RnYtEvjY09QsH53zUc6oAJBw6W12V07i7nc24wJTbCbwCZBsXh4QR5vuESi0dGRyBalTykWfqrlA== X-Gm-Message-State: AOJu0YyE+QgUCTNDMKwpEOvfBF/Jkb9sxmRmXuA2d4JVgBSaTZWllEAw C2NJTznYkACNB/GsBDB36fWQRoaZyjFCVRL9/eY2f7G2aOdEkvFT0Zc7eBN7/zSmh0KZfehlgOp WNUo= X-Received: by 2002:a05:600c:1d24:b0:413:f033:e1ee with SMTP id l36-20020a05600c1d2400b00413f033e1eemr2842397wms.9.1711734717047; Fri, 29 Mar 2024 10:51:57 -0700 (PDT) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:8261:5fff:fe11:bdda]) by smtp.gmail.com with ESMTPSA id d7-20020a05600c3ac700b00415509b33c0sm2127781wms.10.2024.03.29.10.51.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 29 Mar 2024 10:51:56 -0700 (PDT) From: Neil Armstrong Date: Fri, 29 Mar 2024 18:51:50 +0100 Subject: [PATCH v2 3/5] dts: meson: Drop redundant GXL, GXM & AXG devicetree files MIME-Version: 1.0 Message-Id: <20240329-u-boot-of-upstream-v2-3-2512ad3eb63d@linaro.org> References: <20240329-u-boot-of-upstream-v2-0-2512ad3eb63d@linaro.org> In-Reply-To: <20240329-u-boot-of-upstream-v2-0-2512ad3eb63d@linaro.org> To: Tom Rini , Vyacheslav Bocharov , Christian Hewitt Cc: u-boot-amlogic@groups.io, u-boot@lists.denx.de, Neil Armstrong , Sumit Garg X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=216177; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=k6X7isteXST4sEAg4wZYsd8nZh4lhAfI+SEn9JtZycE=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBmBv+3HHN4Lw3azEPKCVEfJzS1riVsQhyrP2Bbf9Gw q4s/TvKJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZgb/twAKCRB33NvayMhJ0QGwD/ wMCCGIImMQ5xD4aZRcR6/9vCWWcf5WqJ7kGcuiXObhIfDFJERqHrI7cjzbjUmHfeBp1VuUwFBYWK2l N0XQu79vxxxO9AdI8OYSuZcOW2iC2gIQ+zJ52Lr8+sMpy8qePEJ/nNi2pRgZwXviG8GPyOAHMMJc4R ElBpF93Ie6xqAEigCY05QZtpxuFd7XELTVY9FEHfieezfBzZ8oodUJWaZpohV/Km8l0gIIcg3JEVxS TziI+v3YeEO2iQ1twKgnuTTBPjHM6DTxk4K3xWMF2KuISOpJBJ8uznjT3fwRyWytTnY0yIg2aZtV1N U+QwIdAsmEllxihlKt8mvJFXkPblwxGZz34uhwbV+zNSYiaN/E8eng8zmjTU2NfsFuwD75QbHzseuI S97lGaNrbmZg5UohURRMGZoVMrj3CwmZbBf3uduUwckZ6VLFuVIEYFbTPEcABzmxTVX8Tpmp2yDjBo R+qoXi6CN1PasILW4OiU0VEM7xo6zxm2zTsE6SzET+k6f0P23WKMcF17Ii0vevij7QJ2B/8f+sSw3q zpT0aitlpZicVnjw/Pt3K3OWtlo2FkMNyLbpGv4DMZ2hXHesJ9eLY3xUsBrEtv+P4Io9abC3HwCBk6 evj+EqILA780has8T7MFxyWfY9J7KQqan+3OiYSHPqVnyGF22AzhU9+o/iqg== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE X-Mailman-Approved-At: Fri, 29 Mar 2024 22:40:30 +0100 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Since meson GXL, GXM & AXG based boards switched to using upstream DT, so drop redundant files from arch/arm/dts directory. Only *-u-boot.dtsi files kept in arch/arm/dts directory for these boards. Cc: Sumit Garg Acked-by: Viacheslav Bocharov Reviewed-by: Sumit Garg Signed-off-by: Neil Armstrong --- arch/arm/dts/Makefile | 13 - arch/arm/dts/meson-axg-jethome-jethub-j100.dts | 361 ---- arch/arm/dts/meson-axg-s400.dts | 602 ------ arch/arm/dts/meson-axg.dtsi | 1957 -------------------- arch/arm/dts/meson-gx-libretech-pc.dtsi | 447 ----- arch/arm/dts/meson-gx-mali450.dtsi | 61 - arch/arm/dts/meson-gx-p23x-q20x.dtsi | 324 ---- arch/arm/dts/meson-gx.dtsi | 675 ------- arch/arm/dts/meson-gxl-mali.dtsi | 17 - arch/arm/dts/meson-gxl-s805x-libretech-ac.dts | 319 ---- arch/arm/dts/meson-gxl-s805x.dtsi | 23 - arch/arm/dts/meson-gxl-s905d-libretech-pc.dts | 16 - arch/arm/dts/meson-gxl-s905d.dtsi | 12 - .../arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts | 247 --- arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 237 --- arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts | 313 ---- arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 356 ---- arch/arm/dts/meson-gxl-s905x-p212.dts | 134 -- arch/arm/dts/meson-gxl-s905x-p212.dtsi | 213 --- arch/arm/dts/meson-gxl-s905x.dtsi | 18 - arch/arm/dts/meson-gxl.dtsi | 940 ---------- arch/arm/dts/meson-gxm-gt1-ultimate.dts | 91 - arch/arm/dts/meson-gxm-khadas-vim2.dts | 424 ----- arch/arm/dts/meson-gxm-s912-libretech-pc.dts | 62 - arch/arm/dts/meson-gxm-wetek-core2.dts | 85 - arch/arm/dts/meson-gxm.dtsi | 216 --- include/dt-bindings/gpio/meson-axg-gpio.h | 116 -- include/dt-bindings/gpio/meson-gxbb-gpio.h | 148 -- include/dt-bindings/gpio/meson-gxl-gpio.h | 125 -- include/dt-bindings/power/meson-axg-power.h | 14 - include/dt-bindings/power/meson-gxbb-power.h | 13 - .../dt-bindings/reset/amlogic,meson-axg-reset.h | 123 -- .../dt-bindings/reset/amlogic,meson-gxbb-reset.h | 161 -- include/dt-bindings/sound/meson-aiu.h | 18 - 34 files changed, 8881 deletions(-) diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d85a33055c..135e08df3c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -220,19 +220,6 @@ dtb-$(CONFIG_ARCH_S5P4418) += \ dtb-$(CONFIG_ARCH_MESON) += \ meson-a1-ad401.dtb \ - meson-axg-s400.dtb \ - meson-axg-jethome-jethub-j100.dtb \ - meson-gxl-s805x-libretech-ac.dtb \ - meson-gxl-s905d-libretech-pc.dtb \ - meson-gxl-s905w-jethome-jethub-j80.dtb \ - meson-gxl-s905x-khadas-vim.dtb \ - meson-gxl-s905x-libretech-cc.dtb \ - meson-gxl-s905x-libretech-cc-v2.dtb \ - meson-gxl-s905x-p212.dtb \ - meson-gxm-gt1-ultimate.dtb \ - meson-gxm-khadas-vim2.dtb \ - meson-gxm-s912-libretech-pc.dtb \ - meson-gxm-wetek-core2.dtb \ meson-g12a-radxa-zero.dtb \ meson-g12a-sei510.dtb \ meson-g12a-u200.dtb \ diff --git a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts b/arch/arm/dts/meson-axg-jethome-jethub-j100.dts deleted file mode 100644 index 5783732dc6..0000000000 --- a/arch/arm/dts/meson-axg-jethome-jethub-j100.dts +++ /dev/null @@ -1,361 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Vyacheslav Bocharov - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev - * Author: Alexey Shevelkin - * Author: Vyacheslav Bocharov - */ - -/dts-v1/; - -#include "meson-axg.dtsi" -#include -#include - -/ { - compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg"; - model = "JetHome JetHub J100"; - aliases { - serial0 = &uart_AO; /* Console */ - serial1 = &uart_AO_B; /* External UART (Wireless Module) */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* 1024MB RAM */ - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - reserved-memory { - linux,cma { - size = <0x0 0x400000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - regulator-always-on; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&scpi_sensors 0>; - trips { - cpu_passive: cpu-passive { - temperature = <70000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <100000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - onewire { - compatible = "w1-gpio"; - gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>; - #gpio-cells = <1>; - }; -}; - -&efuse { - sn: sn@32 { - reg = <0x32 0x20>; - }; - - eth_mac: eth_mac@0 { - reg = <0x0 0x6>; - }; - - bt_mac: bt_mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi_mac@c { - reg = <0xc 0x6>; - }; - - bid: bid@12 { - reg = <0x12 0x20>; - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rmii_x_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */ - eth_phy0: ethernet-phy@0 { - /* compatible = "ethernet-phy-id0243.0c54";*/ - max-speed = <100>; - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <10000>; - reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Internal I2C bus (on CPU module) */ -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - /* RTC */ - pcf8563: pcf8563@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; -}; - -/* Peripheral I2C bus (on motherboard) */ -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; - -/* wifi module */ -&sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr104; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* UART Bluetooth */ -&uart_B { - status = "okay"; - pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>; - }; -}; - -/* UART Console */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* UART Wireless module */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - phy-supply = <&usb_pwr>; -}; - -&spicc1 { - status = "okay"; - pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>; - pinctrl-names = "default"; -}; - -&gpio { - gpio-line-names = - "", "", "", "", "", // 0 - 4 - "", "", "", "", "", // 5 - 9 - "UserButton", "", "", "", "", // 10 - 14 - "", "", "", "", "", // 15 - 19 - "", "", "", "", "", // 20 - 24 - "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29 - "Output1", "", "", "", "", // 30 - 34 - "", "ZigBeeBOOT", "", "", "", // 35 - 39 - "", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44 - "Input2", "Input1", "", "", "", // 45 - 49 - "", "", "", "", "", // 50 - 54 - "", "", "", "", "", // 55 - 59 - "", "", "", "", "", // 60 - 64 - "", "", "", "", "", // 65 - 69 - "", "", "", "", "", // 70 - 74 - "", "", "", "", "", // 75 - 79 - "", "", "", "", "", // 80 - 84 - "", ""; // 85-86 -}; - -&cpu0 { - #cooling-cells = <2>; -}; - -&cpu1 { - #cooling-cells = <2>; -}; - -&cpu2 { - #cooling-cells = <2>; -}; - -&cpu3 { - #cooling-cells = <2>; -}; diff --git a/arch/arm/dts/meson-axg-s400.dts b/arch/arm/dts/meson-axg-s400.dts deleted file mode 100644 index 359589d1df..0000000000 --- a/arch/arm/dts/meson-axg-s400.dts +++ /dev/null @@ -1,602 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - */ - -/dts-v1/; - -#include "meson-axg.dtsi" -#include - -/ { - compatible = "amlogic,s400", "amlogic,a113d", "amlogic,meson-axg"; - model = "Amlogic Meson AXG S400 Development Board"; - - adc_keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-next { - label = "Next"; - linux,code = ; - press-threshold-microvolt = <1116000>; /* 62% */ - }; - - button-prev { - label = "Previous"; - linux,code = ; - press-threshold-microvolt = <900000>; /* 50% */ - }; - - button-wifi { - label = "Wifi"; - linux,code = ; - press-threshold-microvolt = <684000>; /* 38% */ - }; - - button-up { - label = "Volume Up"; - linux,code = ; - press-threshold-microvolt = <468000>; /* 26% */ - }; - - button-down { - label = "Volume Down"; - linux,code = ; - press-threshold-microvolt = <252000>; /* 14% */ - }; - - button-voice { - label = "Voice"; - linux,code = ; - press-threshold-microvolt = <0>; /* 0% */ - }; - }; - - aliases { - serial0 = &uart_AO; - serial1 = &uart_A; - }; - - linein: audio-codec-0 { - #sound-dai-cells = <0>; - compatible = "everest,es7241"; - VDDA-supply = <&vcc_3v3>; - VDDP-supply = <&vcc_3v3>; - VDDD-supply = <&vcc_3v3>; - status = "okay"; - sound-name-prefix = "Linein"; - }; - - lineout: audio-codec-1 { - #sound-dai-cells = <0>; - compatible = "everest,es7154"; - VDD-supply = <&vcc_3v3>; - PVDD-supply = <&vcc_5v>; - status = "okay"; - sound-name-prefix = "Lineout"; - }; - - spdif_dit: audio-codec-2 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; - }; - - dmics: audio-codec-3 { - #sound-dai-cells = <0>; - compatible = "dmic-codec"; - num-channels = <7>; - wakeup-delay-ms = <50>; - status = "okay"; - sound-name-prefix = "MIC"; - }; - - spdif_dir: audio-codec-4 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dir"; - status = "okay"; - sound-name-prefix = "DIR"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - main_12v: regulator-main_12v { - compatible = "regulator-fixed"; - regulator-name = "12V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vcc_5v: regulator-vcc_5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&main_12v>; - - gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&main_12v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; - }; - - usb_pwr: regulator-usb_pwr { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - speaker-leds { - compatible = "gpio-leds"; - - aled1 { - label = "speaker:aled1"; - gpios = <&gpio_speaker 7 0>; - }; - - aled2 { - label = "speaker:aled2"; - gpios = <&gpio_speaker 6 0>; - }; - - aled3 { - label = "speaker:aled3"; - gpios = <&gpio_speaker 5 0>; - }; - - aled4 { - label = "speaker:aled4"; - gpios = <&gpio_speaker 4 0>; - }; - - aled5 { - label = "speaker:aled5"; - gpios = <&gpio_speaker 3 0>; - }; - - aled6 { - label = "speaker:aled6"; - gpios = <&gpio_speaker 2 0>; - }; - }; - - sound { - compatible = "amlogic,axg-sound-card"; - model = "AXG-S400"; - audio-aux-devs = <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, - <&tdmin_lb>, <&tdmout_c>; - audio-widgets = "Line", "Lineout", - "Line", "Linein", - "Speaker", "Speaker1 Left", - "Speaker", "Speaker1 Right"; - audio-routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2", - "SPDIFOUT IN 0", "FRDDR_A OUT 3", - "TDMOUT_C IN 1", "FRDDR_B OUT 2", - "SPDIFOUT IN 1", "FRDDR_B OUT 3", - "TDMOUT_C IN 2", "FRDDR_C OUT 2", - "SPDIFOUT IN 2", "FRDDR_C OUT 3", - "TDM_C Playback", "TDMOUT_C OUT", - "TDMIN_A IN 2", "TDM_C Capture", - "TDMIN_A IN 5", "TDM_C Loopback", - "TDMIN_B IN 2", "TDM_C Capture", - "TDMIN_B IN 5", "TDM_C Loopback", - "TDMIN_C IN 2", "TDM_C Capture", - "TDMIN_C IN 5", "TDM_C Loopback", - "TDMIN_LB IN 2", "TDM_C Loopback", - "TDMIN_LB IN 5", "TDM_C Capture", - "TODDR_A IN 0", "TDMIN_A OUT", - "TODDR_B IN 0", "TDMIN_A OUT", - "TODDR_C IN 0", "TDMIN_A OUT", - "TODDR_A IN 1", "TDMIN_B OUT", - "TODDR_B IN 1", "TDMIN_B OUT", - "TODDR_C IN 1", "TDMIN_B OUT", - "TODDR_A IN 2", "TDMIN_C OUT", - "TODDR_B IN 2", "TDMIN_C OUT", - "TODDR_C IN 2", "TDMIN_C OUT", - "TODDR_A IN 3", "SPDIFIN Capture", - "TODDR_B IN 3", "SPDIFIN Capture", - "TODDR_C IN 3", "SPDIFIN Capture", - "TODDR_A IN 4", "PDM Capture", - "TODDR_B IN 4", "PDM Capture", - "TODDR_C IN 4", "PDM Capture", - "TODDR_A IN 6", "TDMIN_LB OUT", - "TODDR_B IN 6", "TDMIN_LB OUT", - "TODDR_C IN 6", "TDMIN_LB OUT", - "Lineout", "Lineout AOUTL", - "Lineout", "Lineout AOUTR", - "Speaker1 Left", "SPK1 OUT_A", - "Speaker1 Left", "SPK1 OUT_B", - "Speaker1 Right", "SPK1 OUT_C", - "Speaker1 Right", "SPK1 OUT_D", - "Linein AINL", "Linein", - "Linein AINR", "Linein"; - assigned-clocks = <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <589824000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&frddr_a>; - }; - - dai-link-1 { - sound-dai = <&frddr_b>; - }; - - dai-link-2 { - sound-dai = <&frddr_c>; - }; - - dai-link-3 { - sound-dai = <&toddr_a>; - }; - - dai-link-4 { - sound-dai = <&toddr_b>; - }; - - dai-link-5 { - sound-dai = <&toddr_c>; - }; - - dai-link-6 { - sound-dai = <&tdmif_c>; - dai-format = "i2s"; - dai-tdm-slot-tx-mask-2 = <1 1>; - dai-tdm-slot-rx-mask-1 = <1 1>; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&lineout>; - }; - - codec-1 { - sound-dai = <&speaker_amp1>; - }; - - codec-2 { - sound-dai = <&linein>; - }; - - }; - - dai-link-7 { - sound-dai = <&spdifout>; - - codec { - sound-dai = <&spdif_dit>; - }; - }; - - dai-link-8 { - sound-dai = <&spdifin>; - - codec { - sound-dai = <&spdif_dir>; - }; - }; - - dai-link-9 { - sound-dai = <&pdm>; - - codec { - sound-dai = <&dmics>; - }; - }; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */ - }; -}; - -ðmac { - status = "okay"; - pinctrl-0 = <ð_rgmii_y_pins>; - pinctrl-names = "default"; - phy-handle = <ð_phy0>; - phy-mode = "rgmii"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - eth_phy0: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - interrupt-parent = <&gpio_intc>; - interrupts = <98 IRQ_TYPE_LEVEL_LOW>; - eee-broken-1000t; - }; - }; -}; - -&frddr_a { - status = "okay"; -}; - -&frddr_b { - status = "okay"; -}; - -&frddr_c { - status = "okay"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&i2c1 { - status = "okay"; - pinctrl-0 = <&i2c1_z_pins>; - pinctrl-names = "default"; - - speaker_amp1: audio-codec@1b { - compatible = "ti,tas5707"; - reg = <0x1b>; - reset-gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; - #sound-dai-cells = <0>; - AVDD-supply = <&vcc_3v3>; - DVDD-supply = <&vcc_3v3>; - PVDD_A-supply = <&main_12v>; - PVDD_B-supply = <&main_12v>; - PVDD_C-supply = <&main_12v>; - PVDD_D-supply = <&main_12v>; - sound-name-prefix = "SPK1"; - }; -}; - -&i2c_AO { - status = "okay"; - pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>; - pinctrl-names = "default"; - - gpio_speaker: gpio-controller@1f { - compatible = "nxp,pca9557"; - reg = <0x1f>; - gpio-controller; - #gpio-cells = <2>; - vcc-supply = <&vddao_3v3>; - }; -}; - -&pdm { - pinctrl-0 = <&pdm_dclk_a14_pins>, <&pdm_din0_pins>, - <&pdm_din1_pins>, <&pdm_din2_pins>, <&pdm_din3_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&pcieA { - reset-gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&pcieB { - reset-gpios = <&gpio GPIOZ_10 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; - status = "okay"; -}; - -&pwm_ab { - status = "okay"; - pinctrl-0 = <&pwm_a_x20_pins>; - pinctrl-names = "default"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* wifi module */ -&sd_emmc_b { - status = "okay"; - #address-cells = <1>; - #size-cells = <0>; - - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr104; - max-frequency = <200000000>; - non-removable; - disable-wp; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* emmc storage */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -&spdifin { - pinctrl-0 = <&spdif_in_a19_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&spdifout { - pinctrl-0 = <&spdif_out_a20_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmif_a { - pinctrl-0 = <&tdma_sclk_pins>, <&tdma_fs_pins>, - <&tdma_din0_pins>, <&tdma_dout0_x15_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmif_b { - pinctrl-0 = <&tdmb_sclk_pins>, <&tdmb_fs_pins>, - <&tdmb_din3_pins>, <&mclk_b_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmif_c { - pinctrl-0 = <&tdmc_sclk_pins>, <&tdmc_fs_pins>, - <&tdmc_din1_pins>, <&tdmc_dout2_pins>, - <&mclk_c_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tdmin_a { - status = "okay"; -}; - -&tdmin_b { - status = "okay"; -}; - -&tdmin_c { - status = "okay"; -}; - -&tdmin_lb { - status = "okay"; -}; - -&tdmout_c { - status = "okay"; -}; - -&toddr_a { - status = "okay"; -}; - -&toddr_b { - status = "okay"; -}; - -&toddr_c { - status = "okay"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usb_pwr>; -}; diff --git a/arch/arm/dts/meson-axg.dtsi b/arch/arm/dts/meson-axg.dtsi deleted file mode 100644 index 3f5254eeb4..0000000000 --- a/arch/arm/dts/meson-axg.dtsi +++ /dev/null @@ -1,1957 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/ { - compatible = "amlogic,meson-axg"; - - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - }; - - l2: l2-cache0 { - compatible = "cache"; - }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - secure-monitor = <&sm>; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; - - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - - scpi { - compatible = "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - - scpi_clocks: clocks { - compatible = "arm,scpi-clocks"; - - scpi_dvfs: clock-controller { - compatible = "arm,scpi-dvfs-clocks"; - #clock-cells = <1>; - clock-indices = <0>; - clock-output-names = "vcpu"; - }; - }; - - scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors"; - #thermal-sensor-cells = <1>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - pcieA: pcie@f9800000 { - compatible = "amlogic,axg-pcie", "snps,dw-pcie"; - reg = <0x0 0xf9800000 0x0 0x400000>, - <0x0 0xff646000 0x0 0x2000>, - <0x0 0xf9f00000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; - interrupts = ; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>; - clock-names = "general", "pclk", "port"; - resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>; - reset-names = "port", "apb"; - num-lanes = <1>; - phys = <&pcie_phy>; - phy-names = "pcie"; - status = "disabled"; - }; - - pcieB: pcie@fa000000 { - compatible = "amlogic,axg-pcie", "snps,dw-pcie"; - reg = <0x0 0xfa000000 0x0 0x400000>, - <0x0 0xff648000 0x0 0x2000>, - <0x0 0xfa400000 0x0 0x100000>; - reg-names = "elbi", "cfg", "config"; - interrupts = ; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>; - bus-range = <0x0 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>; - clock-names = "general", "pclk", "port"; - resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>; - reset-names = "port", "apb"; - num-lanes = <1>; - phys = <&pcie_phy>; - phy-names = "pcie"; - status = "disabled"; - }; - - usb: usb@ffe09080 { - compatible = "amlogic,meson-axg-usb-ctrl"; - reg = <0x0 0xffe09080 0x0 0x20>; - interrupts = ; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "usb_ctrl", "ddr"; - resets = <&reset RESET_USB_OTG>; - - dr_mode = "otg"; - - phys = <&usb2_phy1>; - phy-names = "usb2-phy1"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = ; - clocks = <&clkc CLKID_USB1>; - clock-names = "otg"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = ; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - }; - }; - - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000>, - <0x0 0xff634540 0x0 0x8>; - interrupts = ; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "stmmaceth", "clkin0", "clkin1", - "timing-adjustment"; - rx-fifo-depth = <4096>; - tx-fifo-depth = <2048>; - power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>; - status = "disabled"; - }; - - pcie_phy: phy@ff644000 { - compatible = "amlogic,axg-pcie-phy"; - reg = <0x0 0xff644000 0x0 0x1c>; - resets = <&reset RESET_PCIE_PHY>; - phys = <&mipi_pcie_analog_dphy>; - phy-names = "analog"; - #phy-cells = <0>; - }; - - pdm: audio-controller@ff632000 { - compatible = "amlogic,axg-pdm"; - reg = <0x0 0xff632000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - periphs: bus@ff634000 { - compatible = "simple-bus"; - reg = <0x0 0xff634000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>; - - hwrng: rng@18 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x18 0x0 0x4>; - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; - }; - - pinctrl_periphs: pinctrl@480 { - compatible = "amlogic,meson-axg-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@480 { - reg = <0x0 0x00480 0x0 0x40>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x3c>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 0 86>; - }; - - i2c0_pins: i2c0 { - mux { - groups = "i2c0_sck", - "i2c0_sda"; - function = "i2c0"; - bias-disable; - }; - }; - - i2c1_x_pins: i2c1_x { - mux { - groups = "i2c1_sck_x", - "i2c1_sda_x"; - function = "i2c1"; - bias-disable; - }; - }; - - i2c1_z_pins: i2c1_z { - mux { - groups = "i2c1_sck_z", - "i2c1_sda_z"; - function = "i2c1"; - bias-disable; - }; - }; - - i2c2_a_pins: i2c2_a { - mux { - groups = "i2c2_sck_a", - "i2c2_sda_a"; - function = "i2c2"; - bias-disable; - }; - }; - - i2c2_x_pins: i2c2_x { - mux { - groups = "i2c2_sck_x", - "i2c2_sda_x"; - function = "i2c2"; - bias-disable; - }; - }; - - i2c3_a6_pins: i2c3_a6 { - mux { - groups = "i2c3_sda_a6", - "i2c3_sck_a7"; - function = "i2c3"; - bias-disable; - }; - }; - - i2c3_a12_pins: i2c3_a12 { - mux { - groups = "i2c3_sda_a12", - "i2c3_sck_a13"; - function = "i2c3"; - bias-disable; - }; - }; - - i2c3_a19_pins: i2c3_a19 { - mux { - groups = "i2c3_sda_a19", - "i2c3_sck_a20"; - function = "i2c3"; - bias-disable; - }; - }; - - emmc_pins: emmc { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - }; - }; - - emmc_ds_pins: emmc_ds { - mux { - groups = "emmc_ds"; - function = "emmc"; - bias-pull-down; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - eth_rgmii_x_pins: eth-x-rgmii { - mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - bias-disable; - }; - }; - - eth_rgmii_y_pins: eth-y-rgmii { - mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - bias-disable; - }; - }; - - eth_rmii_x_pins: eth-x-rmii { - mux { - groups = "eth_mdio_x", - "eth_mdc_x", - "eth_rgmii_rx_clk_x", - "eth_rx_dv_x", - "eth_rxd0_x", - "eth_rxd1_x", - "eth_txen_x", - "eth_txd0_x", - "eth_txd1_x"; - function = "eth"; - bias-disable; - }; - }; - - eth_rmii_y_pins: eth-y-rmii { - mux { - groups = "eth_mdio_y", - "eth_mdc_y", - "eth_rgmii_rx_clk_y", - "eth_rx_dv_y", - "eth_rxd0_y", - "eth_rxd1_y", - "eth_txen_y", - "eth_txd0_y", - "eth_txd1_y"; - function = "eth"; - bias-disable; - }; - }; - - mclk_b_pins: mclk_b { - mux { - groups = "mclk_b"; - function = "mclk_b"; - bias-disable; - }; - }; - - mclk_c_pins: mclk_c { - mux { - groups = "mclk_c"; - function = "mclk_c"; - bias-disable; - }; - }; - - pdm_dclk_a14_pins: pdm_dclk_a14 { - mux { - groups = "pdm_dclk_a14"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_dclk_a19_pins: pdm_dclk_a19 { - mux { - groups = "pdm_dclk_a19"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_pins: pdm_din0 { - mux { - groups = "pdm_din0"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_pins: pdm_din1 { - mux { - groups = "pdm_din1"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_pins: pdm_din2 { - mux { - groups = "pdm_din2"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_pins: pdm_din3 { - mux { - groups = "pdm_din3"; - function = "pdm"; - bias-disable; - }; - }; - - pwm_a_a_pins: pwm_a_a { - mux { - groups = "pwm_a_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_a_x18_pins: pwm_a_x18 { - mux { - groups = "pwm_a_x18"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_a_x20_pins: pwm_a_x20 { - mux { - groups = "pwm_a_x20"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_a_z_pins: pwm_a_z { - mux { - groups = "pwm_a_z"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_a_pins: pwm_b_a { - mux { - groups = "pwm_b_a"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_x_pins: pwm_b_x { - mux { - groups = "pwm_b_x"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_z_pins: pwm_b_z { - mux { - groups = "pwm_b_z"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_a_pins: pwm_c_a { - mux { - groups = "pwm_c_a"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x10_pins: pwm_c_x10 { - mux { - groups = "pwm_c_x10"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x17_pins: pwm_c_x17 { - mux { - groups = "pwm_c_x17"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_x11_pins: pwm_d_x11 { - mux { - groups = "pwm_d_x11"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_d_x16_pins: pwm_d_x16 { - mux { - groups = "pwm_d_x16"; - function = "pwm_d"; - bias-disable; - }; - }; - - sdio_pins: sdio { - mux-0 { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd"; - function = "sdio"; - bias-pull-up; - }; - - mux-1 { - groups = "sdio_clk"; - function = "sdio"; - bias-disable; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - spdif_in_z_pins: spdif_in_z { - mux { - groups = "spdif_in_z"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a1_pins: spdif_in_a1 { - mux { - groups = "spdif_in_a1"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a7_pins: spdif_in_a7 { - mux { - groups = "spdif_in_a7"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a19_pins: spdif_in_a19 { - mux { - groups = "spdif_in_a19"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a20_pins: spdif_in_a20 { - mux { - groups = "spdif_in_a20"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_out_a1_pins: spdif_out_a1 { - mux { - groups = "spdif_out_a1"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_a11_pins: spdif_out_a11 { - mux { - groups = "spdif_out_a11"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_a19_pins: spdif_out_a19 { - mux { - groups = "spdif_out_a19"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_a20_pins: spdif_out_a20 { - mux { - groups = "spdif_out_a20"; - function = "spdif_out"; - bias-disable; - }; - }; - - spdif_out_z_pins: spdif_out_z { - mux { - groups = "spdif_out_z"; - function = "spdif_out"; - bias-disable; - }; - }; - - spi0_pins: spi0 { - mux { - groups = "spi0_miso", - "spi0_mosi", - "spi0_clk"; - function = "spi0"; - bias-disable; - }; - }; - - spi0_ss0_pins: spi0_ss0 { - mux { - groups = "spi0_ss0"; - function = "spi0"; - bias-disable; - }; - }; - - spi0_ss1_pins: spi0_ss1 { - mux { - groups = "spi0_ss1"; - function = "spi0"; - bias-disable; - }; - }; - - spi0_ss2_pins: spi0_ss2 { - mux { - groups = "spi0_ss2"; - function = "spi0"; - bias-disable; - }; - }; - - spi1_a_pins: spi1_a { - mux { - groups = "spi1_miso_a", - "spi1_mosi_a", - "spi1_clk_a"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_ss0_a_pins: spi1_ss0_a { - mux { - groups = "spi1_ss0_a"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_ss1_pins: spi1_ss1 { - mux { - groups = "spi1_ss1"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_x_pins: spi1_x { - mux { - groups = "spi1_miso_x", - "spi1_mosi_x", - "spi1_clk_x"; - function = "spi1"; - bias-disable; - }; - }; - - spi1_ss0_x_pins: spi1_ss0_x { - mux { - groups = "spi1_ss0_x"; - function = "spi1"; - bias-disable; - }; - }; - - tdma_din0_pins: tdma_din0 { - mux { - groups = "tdma_din0"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_dout0_x14_pins: tdma_dout0_x14 { - mux { - groups = "tdma_dout0_x14"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_dout0_x15_pins: tdma_dout0_x15 { - mux { - groups = "tdma_dout0_x15"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_dout1_pins: tdma_dout1 { - mux { - groups = "tdma_dout1"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_din1_pins: tdma_din1 { - mux { - groups = "tdma_din1"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_fs_pins: tdma_fs { - mux { - groups = "tdma_fs"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_fs_slv_pins: tdma_fs_slv { - mux { - groups = "tdma_fs_slv"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_sclk_pins: tdma_sclk { - mux { - groups = "tdma_sclk"; - function = "tdma"; - bias-disable; - }; - }; - - tdma_sclk_slv_pins: tdma_sclk_slv { - mux { - groups = "tdma_sclk_slv"; - function = "tdma"; - bias-disable; - }; - }; - - tdmb_din0_pins: tdmb_din0 { - mux { - groups = "tdmb_din0"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_din1_pins: tdmb_din1 { - mux { - groups = "tdmb_din1"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_din2_pins: tdmb_din2 { - mux { - groups = "tdmb_din2"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_din3_pins: tdmb_din3 { - mux { - groups = "tdmb_din3"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout0_pins: tdmb_dout0 { - mux { - groups = "tdmb_dout0"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout1_pins: tdmb_dout1 { - mux { - groups = "tdmb_dout1"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout2_pins: tdmb_dout2 { - mux { - groups = "tdmb_dout2"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_dout3_pins: tdmb_dout3 { - mux { - groups = "tdmb_dout3"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_fs_pins: tdmb_fs { - mux { - groups = "tdmb_fs"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_fs_slv_pins: tdmb_fs_slv { - mux { - groups = "tdmb_fs_slv"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_sclk_pins: tdmb_sclk { - mux { - groups = "tdmb_sclk"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmb_sclk_slv_pins: tdmb_sclk_slv { - mux { - groups = "tdmb_sclk_slv"; - function = "tdmb"; - bias-disable; - }; - }; - - tdmc_fs_pins: tdmc_fs { - mux { - groups = "tdmc_fs"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_fs_slv_pins: tdmc_fs_slv { - mux { - groups = "tdmc_fs_slv"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_sclk_pins: tdmc_sclk { - mux { - groups = "tdmc_sclk"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_sclk_slv_pins: tdmc_sclk_slv { - mux { - groups = "tdmc_sclk_slv"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din0_pins: tdmc_din0 { - mux { - groups = "tdmc_din0"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din1_pins: tdmc_din1 { - mux { - groups = "tdmc_din1"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din2_pins: tdmc_din2 { - mux { - groups = "tdmc_din2"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_din3_pins: tdmc_din3 { - mux { - groups = "tdmc_din3"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout0_pins: tdmc_dout0 { - mux { - groups = "tdmc_dout0"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout1_pins: tdmc_dout1 { - mux { - groups = "tdmc_dout1"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout2_pins: tdmc_dout2 { - mux { - groups = "tdmc_dout2"; - function = "tdmc"; - bias-disable; - }; - }; - - tdmc_dout3_pins: tdmc_dout3 { - mux { - groups = "tdmc_dout3"; - function = "tdmc"; - bias-disable; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_x_pins: uart_b_x { - mux { - groups = "uart_tx_b_x", - "uart_rx_b_x"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_x_cts_rts_pins: uart_b_x_cts_rts { - mux { - groups = "uart_cts_b_x", - "uart_rts_b_x"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_z_pins: uart_b_z { - mux { - groups = "uart_tx_b_z", - "uart_rx_b_z"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_z_cts_rts_pins: uart_b_z_cts_rts { - mux { - groups = "uart_cts_b_z", - "uart_rts_b_z"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_ao_b_z_pins: uart_ao_b_z { - mux { - groups = "uart_ao_tx_b_z", - "uart_ao_rx_b_z"; - function = "uart_ao_b_z"; - bias-disable; - }; - }; - - uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts { - mux { - groups = "uart_ao_cts_b_z", - "uart_ao_rts_b_z"; - function = "uart_ao_b_z"; - bias-disable; - }; - }; - }; - }; - - hiubus: bus@ff63c000 { - compatible = "simple-bus"; - reg = <0x0 0xff63c000 0x0 0x1c00>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-axg-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,axg-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - - pwrc: power-controller { - compatible = "amlogic,meson-axg-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&sysctrl_AO>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - reset-names = "viu", "venc", "vcbus", - "vencl", "vid_lock"; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <250000000>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - - mipi_pcie_analog_dphy: phy { - compatible = "amlogic,axg-mipi-pcie-analog-phy"; - #phy-cells = <0>; - status = "disabled"; - }; - }; - }; - - mailbox: mailbox@ff63c404 { - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0xff63c404 0 0x4c>; - interrupts = , - , - ; - #mbox-cells = <1>; - }; - - mipi_dphy: phy@ff640000 { - compatible = "amlogic,axg-mipi-dphy"; - reg = <0x0 0xff640000 0x0 0x100>; - clocks = <&clkc CLKID_MIPI_DSI_PHY>; - clock-names = "pclk"; - resets = <&reset RESET_MIPI_PHY>; - reset-names = "phy"; - phys = <&mipi_pcie_analog_dphy>; - phy-names = "analog"; - #phy-cells = <0>; - status = "disabled"; - }; - - audio: bus@ff642000 { - compatible = "simple-bus"; - reg = <0x0 0xff642000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - compatible = "amlogic,axg-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - amlogic,fifo-depth = <512>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x2c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - amlogic,fifo-depth = <256>; - status = "disabled"; - }; - - arb: reset-controller@280 { - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = ; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,axg-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - }; - - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-axg-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - }; - - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-axg-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 0 15>; - }; - - i2c_ao_sck_4_pins: i2c_ao_sck_4 { - mux { - groups = "i2c_ao_sck_4"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sck_8_pins: i2c_ao_sck_8 { - mux { - groups = "i2c_ao_sck_8"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sck_10_pins: i2c_ao_sck_10 { - mux { - groups = "i2c_ao_sck_10"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sda_5_pins: i2c_ao_sda_5 { - mux { - groups = "i2c_ao_sda_5"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sda_9_pins: i2c_ao_sda_9 { - mux { - groups = "i2c_ao_sda_9"; - function = "i2c_ao"; - bias-disable; - }; - }; - - i2c_ao_sda_11_pins: i2c_ao_sda_11 { - mux { - groups = "i2c_ao_sda_11"; - function = "i2c_ao"; - bias-disable; - }; - }; - - remote_input_ao_pins: remote_input_ao { - mux { - groups = "remote_input_ao"; - function = "remote_input_ao"; - bias-disable; - }; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_ao_tx_a", - "uart_ao_rx_a"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { - mux { - groups = "uart_ao_cts_a", - "uart_ao_rts_a"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_b_pins: uart_ao_b { - mux { - groups = "uart_ao_tx_b", - "uart_ao_rx_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { - mux { - groups = "uart_ao_cts_b", - "uart_ao_rts_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - pwm_AO_cd: pwm@2000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x02000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = ; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = ; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-axg-ao-pwm"; - reg = <0x0 0x07000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@8000 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x8000 0x0 0x20>; - interrupts = ; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-axg-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x38>; - #io-channel-cells = <1>; - interrupts = ; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; - }; - - ge2d: ge2d@ff940000 { - compatible = "amlogic,axg-ge2d"; - reg = <0x0 0xff940000 0x0 0x10000>; - interrupts = ; - clocks = <&clkc CLKID_VAPB>; - resets = <&reset RESET_GE2D>; - }; - - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = ; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x25000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-axg-reset"; - reg = <0x0 0x01004 0x0 0x9c>; - #reset-cells = <1>; - }; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-axg-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - }; - - watchdog@f0d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0xf0d0 0x0 0x10>; - clocks = <&xtal>; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-axg-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - spicc0: spi@13000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x13000 0x0 0x3c>; - interrupts = ; - clocks = <&clkc CLKID_SPICC0>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc1: spi@15000 { - compatible = "amlogic,meson-axg-spicc"; - reg = <0x0 0x15000 0x0 0x3c>; - interrupts = ; - clocks = <&clkc CLKID_SPICC1>; - clock-names = "core"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-axg-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = ; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = ; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = ; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = ; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = ; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = ; - status = "disabled"; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - fifo-size = <128>; - }; - }; - - apb: bus@ffe00000 { - compatible = "simple-bus"; - reg = <0x0 0xffe00000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>; - - sd_emmc_b: sd@5000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x800>; - interrupts = ; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; - }; - - sd_emmc_c: mmc@7000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x800>; - interrupts = ; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; - }; - - usb2_phy1: phy@9020 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x9020 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - }; - }; - - sram: sram@fffc0000 { - compatible = "mmio-sram"; - reg = <0x0 0xfffc0000 0x0 0x20000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xfffc0000 0x20000>; - - cpu_scp_lpri: scp-sram@13000 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13000 0x400>; - }; - - cpu_scp_hpri: scp-sram@13400 { - compatible = "amlogic,meson-axg-scp-shmem"; - reg = <0x13400 0x400>; - }; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; -}; diff --git a/arch/arm/dts/meson-gx-libretech-pc.dtsi b/arch/arm/dts/meson-gx-libretech-pc.dtsi deleted file mode 100644 index 4e84ab87cc..0000000000 --- a/arch/arm/dts/meson-gx-libretech-pc.dtsi +++ /dev/null @@ -1,447 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019 BayLibre SAS. - * Author: Jerome Brunet - */ - -/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */ - -#include -#include -#include - -/ { - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - - button-update { - label = "update"; - linux,code = ; - press-threshold-microvolt = <1300000>; - }; - }; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&vcc5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - status = "disabled"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - leds { - compatible = "gpio-leds"; - - led-green { - color = ; - function = LED_FUNCTION_DISK_ACTIVITY; - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - }; - - vcc_card: regulator-vcc_card { - compatible = "regulator-fixed"; - regulator-name = "VCC_CARD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddio_ao3v3>; - - gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc5v: regulator-vcc5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&ao_5v>; - - gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddio_ao3v3: regulator-vddio_ao3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddio_ao3v3>; - regulator-always-on; - }; - - vddio_card: regulator-vddio-card { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_CARD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - - regulator-settling-time-up-us = <200>; - regulator-settling-time-down-us = <50000>; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-PC"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Speaker", "7J4-14 LEFT", - "Speaker", "7J4-11 RIGHT"; - audio-routing = "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "7J4-14 LEFT", "AU2 OUTL", - "7J4-11 RIGHT", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; - status = "okay"; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>, <ð_phy_irq_pins>; - pinctrl-names = "default"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; - phy-mode = "rgmii"; - status = "okay"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - reg = <0>; - max-speed = <1000>; - reset-assert-us = <10000>; - reset-deassert-us = <30000>; - reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpio_intc>; - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&pinctrl_periphs { - /* - * Make sure the reset pin of the usb HUB is driven high to take - * it out of reset. - */ - usb1_rst_pins: usb1_rst_irq { - mux { - groups = "GPIODV_3"; - function = "gpio_periphs"; - bias-disable; - output-high; - }; - }; - - /* Make sure the phy irq pin is properly configured as input */ - eth_phy_irq_pins: eth_phy_irq { - mux { - groups = "GPIOZ_15"; - function = "gpio_periphs"; - bias-disable; - output-disable; - }; - }; -}; - -&hdmi_tx { - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&vcc5v>; - status = "okay"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&i2c_C { - pinctrl-0 = <&i2c_c_dv18_pins>; - pinctrl-names = "default"; - status = "okay"; - - rtc: rtc@51 { - reg = <0x51>; - compatible = "nxp,pcf8563"; - #clock-cells = <0>; - clock-output-names = "rtc_clkout"; - }; -}; - -&pwm_AO_ab { - pinctrl-0 = <&pwm_ao_a_3_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_ab { - pinctrl-0 = <&pwm_b_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; - status = "okay"; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; - status = "okay"; -}; - -&saradc { - vref-supply = <&vddio_ao18>; - status = "okay"; -}; - -/* SD card */ -&sd_emmc_b { - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-ddr50; - max-frequency = <200000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_card>; - vqmmc-supply = <&vddio_card>; - - status = "okay"; -}; - -/* eMMC */ -&sd_emmc_c { - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddio_ao3v3>; - vqmmc-supply = <&vddio_boot>; - - status = "okay"; -}; - -&spifc { - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - status = "okay"; - - gd25lq128: flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <12000000>; - }; -}; - -&uart_AO { - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb1_rst_pins>; - pinctrl-names = "default"; - phy-supply = <&vcc5v>; -}; - -&usb2_phy1 { - phy-supply = <&vcc5v>; -}; diff --git a/arch/arm/dts/meson-gx-mali450.dtsi b/arch/arm/dts/meson-gx-mali450.dtsi deleted file mode 100644 index f9771b51c8..0000000000 --- a/arch/arm/dts/meson-gx-mali450.dtsi +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 BayLibre SAS - * Author: Neil Armstrong - */ - -/ { - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <950000>; - }; - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <950000>; - }; - opp-285714285 { - opp-hz = /bits/ 64 <285714285>; - opp-microvolt = <950000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <950000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - }; - opp-666666666 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <950000>; - }; - opp-744000000 { - opp-hz = /bits/ 64 <744000000>; - opp-microvolt = <950000>; - }; - }; -}; - -&apb { - mali: gpu@c0000 { - compatible = "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = , - , - , - , - , - , - , - , - , - ; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - operating-points-v2 = <&gpu_opp_table>; - }; -}; diff --git a/arch/arm/dts/meson-gx-p23x-q20x.dtsi b/arch/arm/dts/meson-gx-p23x-q20x.dtsi deleted file mode 100644 index dafc841f7c..0000000000 --- a/arch/arm/dts/meson-gx-p23x-q20x.dtsi +++ /dev/null @@ -1,324 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either - * the pin-compatible S912 (GXM) or S905D (GXL) SoCs. - */ - -#include - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&hdmi_5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - spdif_dit: audio-codec-0 { - #sound-dai-cells = <0>; - compatible = "linux,spdif-dit"; - status = "okay"; - sound-name-prefix = "DIT"; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "P230-Q200"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Line", "Lineout"; - audio-routing = "AU2 INL", "ACODEC LOLP", - "AU2 INR", "ACODEC LORP", - "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "Lineout", "AU2 OUTL", - "Lineout", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>; - - codec-0 { - sound-dai = <&spdif_dit>; - }; - }; - - dai-link-4 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-5 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; - pinctrl-0 = <&spdif_out_h_pins>; - pinctrl-names = "default"; - -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* Wireless SDIO Module */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* This UART is brought out to the DB9 connector */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "otg"; -}; diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi deleted file mode 100644 index 11f89bfecb..0000000000 --- a/arch/arm/dts/meson-gx.dtsi +++ /dev/null @@ -1,675 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Andreas Färber - * - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong - * - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -#include -#include -#include -#include -#include - -/ { - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - aliases { - mmc0 = &sd_emmc_b; /* SD card */ - mmc1 = &sd_emmc_c; /* eMMC */ - mmc2 = &sd_emmc_a; /* SDIO */ - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 16 MiB reserved for Hardware ROM Firmware */ - hwrom_reserved: hwrom@0 { - reg = <0x0 0x0 0x0 0x1000000>; - no-map; - }; - - /* 2 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@10000000 { - reg = <0x0 0x10000000 0x0 0x200000>; - no-map; - }; - - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - - /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ - secmon_reserved_bl32: secmon@5300000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; - }; - }; - - chosen { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - simplefb_cvbs: framebuffer-cvbs { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-cvbs"; - power-domains = <&pwrc PWRC_GXBB_VPU_ID>; - status = "disabled"; - }; - - simplefb_hdmi: framebuffer-hdmi { - compatible = "amlogic,simple-framebuffer", - "simple-framebuffer"; - amlogic,pipeline = "vpu-hdmi"; - power-domains = <&pwrc PWRC_GXBB_VPU_ID>; - status = "disabled"; - }; - }; - - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x0>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x1>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x2>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x3>; - enable-method = "psci"; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 0>; - #cooling-cells = <2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - cache-level = <2>; - }; - }; - - thermal-zones { - cpu-thermal { - polling-delay-passive = <250>; /* milliseconds */ - polling-delay = <1000>; /* milliseconds */ - - thermal-sensors = <&scpi_sensors 0>; - - trips { - cpu_passive: cpu-passive { - temperature = <80000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "passive"; - }; - - cpu_hot: cpu-hot { - temperature = <90000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "hot"; - }; - - cpu_critical: cpu-critical { - temperature = <110000>; /* millicelsius */ - hysteresis = <2000>; /* millicelsius */ - type = "critical"; - }; - }; - - cpu_cooling_maps: cooling-maps { - map0 { - trip = <&cpu_passive>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_hot>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = , - , - , - ; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - - firmware { - sm: secure-monitor { - compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; - #address-cells = <1>; - #size-cells = <1>; - read-only; - secure-monitor = <&sm>; - - sn: sn@14 { - reg = <0x14 0x10>; - }; - - eth_mac: eth-mac@34 { - reg = <0x34 0x10>; - }; - - bid: bid@46 { - reg = <0x46 0x30>; - }; - }; - - scpi { - compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; - mboxes = <&mailbox 1 &mailbox 2>; - shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - - scpi_clocks: clocks { - compatible = "arm,scpi-clocks"; - - scpi_dvfs: clocks-0 { - compatible = "arm,scpi-dvfs-clocks"; - #clock-cells = <1>; - clock-indices = <0>; - clock-output-names = "vcpu"; - }; - }; - - scpi_sensors: sensors { - compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors"; - #thermal-sensor-cells = <1>; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - cbus: bus@c1100000 { - compatible = "simple-bus"; - reg = <0x0 0xc1100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; - - gpio_intc: interrupt-controller@9880 { - compatible = "amlogic,meson-gpio-intc"; - reg = <0x0 0x9880 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - status = "disabled"; - }; - - reset: reset-controller@4404 { - compatible = "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x9c>; - #reset-cells = <1>; - }; - - aiu: audio-controller@5400 { - compatible = "amlogic,aiu"; - #sound-dai-cells = <2>; - sound-name-prefix = "AIU"; - reg = <0x0 0x5400 0x0 0x2ac>; - interrupts = , - ; - interrupt-names = "i2s", "spdif"; - status = "disabled"; - }; - - uart_A: serial@84c0 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84c0 0x0 0x18>; - interrupts = ; - status = "disabled"; - fifo-size = <128>; - }; - - uart_B: serial@84dc { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84dc 0x0 0x18>; - interrupts = ; - status = "disabled"; - }; - - i2c_A: i2c@8500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x08500 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_ab: pwm@8550 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@8650 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08650 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - saradc: adc@8680 { - compatible = "amlogic,meson-saradc"; - reg = <0x0 0x8680 0x0 0x34>; - #io-channel-cells = <1>; - interrupts = ; - status = "disabled"; - }; - - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x086c0 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_C: serial@8700 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x8700 0x0 0x18>; - interrupts = ; - status = "disabled"; - }; - - clock-measure@8758 { - compatible = "amlogic,meson-gx-clk-measure"; - reg = <0x0 0x8758 0x0 0x10>; - }; - - i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087c0 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087e0 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spicc: spi@8d80 { - compatible = "amlogic,meson-gx-spicc"; - reg = <0x0 0x08d80 0x0 0x80>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; - reg = <0x0 0x08c80 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - watchdog@98d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0x098d0 0x0 0x10>; - clocks = <&xtal>; - }; - }; - - gic: interrupt-controller@c4301000 { - compatible = "arm,gic-400"; - reg = <0x0 0xc4301000 0 0x1000>, - <0x0 0xc4302000 0 0x2000>, - <0x0 0xc4304000 0 0x2000>, - <0x0 0xc4306000 0 0x2000>; - interrupt-controller; - interrupts = ; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - sram: sram@c8000000 { - compatible = "mmio-sram"; - reg = <0x0 0xc8000000 0x0 0x14000>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x0 0xc8000000 0x14000>; - - cpu_scp_lpri: scp-sram@0 { - compatible = "amlogic,meson-gxbb-scp-shmem"; - reg = <0x13000 0x400>; - }; - - cpu_scp_hpri: scp-sram@200 { - compatible = "amlogic,meson-gxbb-scp-shmem"; - reg = <0x13400 0x400>; - }; - }; - - aobus: bus@c8100000 { - compatible = "simple-bus"; - reg = <0x0 0xc8100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - - sysctrl_AO: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-gx-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = ; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - uart_AO: serial@4c0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x004c0 0x0 0x18>; - interrupts = ; - status = "disabled"; - }; - - uart_AO_B: serial@4e0 { - compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x004e0 0x0 0x18>; - interrupts = ; - status = "disabled"; - }; - - i2c_AO: i2c@500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x500 0x0 0x20>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - pwm_AO_ab: pwm@550 { - compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm"; - reg = <0x0 0x00550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@580 { - compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir"; - reg = <0x0 0x00580 0x0 0x40>; - interrupts = ; - status = "disabled"; - }; - }; - - vdec: video-codec@c8820000 { - compatible = "amlogic,gx-vdec"; - reg = <0x0 0xc8820000 0x0 0x10000>, - <0x0 0xc110a580 0x0 0xe4>; - reg-names = "dos", "esparser"; - - interrupts = , - ; - interrupt-names = "vdec", "esparser"; - - amlogic,ao-sysctrl = <&sysctrl_AO>; - amlogic,canvas = <&canvas>; - }; - - periphs: bus@c8834000 { - compatible = "simple-bus"; - reg = <0x0 0xc8834000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; - - hwrng: rng@0 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x0 0x0 0x4>; - }; - }; - - dmcbus: bus@c8838000 { - compatible = "simple-bus"; - reg = <0x0 0xc8838000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8838000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - hiubus: bus@c883c000 { - compatible = "simple-bus"; - reg = <0x0 0xc883c000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; - - sysctrl: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - pwrc: power-controller { - compatible = "amlogic,meson-gxbb-pwrc"; - #power-domain-cells = <1>; - amlogic,ao-sysctrl = <&sysctrl_AO>; - }; - }; - - mailbox: mailbox@404 { - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0x404 0 0x4c>; - interrupts = , - , - ; - #mbox-cells = <1>; - }; - }; - - ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gxbb-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000>, - <0x0 0xc8834540 0x0 0x4>; - interrupts = ; - interrupt-names = "macirq"; - rx-fifo-depth = <4096>; - tx-fifo-depth = <2048>; - power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; - status = "disabled"; - }; - - apb: apb@d0000000 { - compatible = "simple-bus"; - reg = <0x0 0xd0000000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; - - sd_emmc_a: mmc@70000 { - compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x800>; - interrupts = ; - status = "disabled"; - }; - - sd_emmc_b: mmc@72000 { - compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x800>; - interrupts = ; - status = "disabled"; - }; - - sd_emmc_c: mmc@74000 { - compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x800>; - interrupts = ; - status = "disabled"; - }; - }; - - vpu: vpu@d0100000 { - compatible = "amlogic,meson-gx-vpu"; - reg = <0x0 0xd0100000 0x0 0x100000>, - <0x0 0xc883c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; - }; - - hdmi_tx: hdmi-tx@c883a000 { - compatible = "amlogic,meson-gx-dw-hdmi"; - reg = <0x0 0xc883a000 0x0 0x1c>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <0>; - sound-name-prefix = "HDMITX"; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - }; -}; diff --git a/arch/arm/dts/meson-gxl-mali.dtsi b/arch/arm/dts/meson-gxl-mali.dtsi deleted file mode 100644 index 478e755cc8..0000000000 --- a/arch/arm/dts/meson-gxl-mali.dtsi +++ /dev/null @@ -1,17 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 BayLibre SAS - * Author: Neil Armstrong - */ - -#include "meson-gx-mali450.dtsi" - -&mali { - compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; - - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; - - assigned-clocks = <&clkc CLKID_GP0_PLL>; - assigned-clock-rates = <744000000>; -}; diff --git a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts b/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts deleted file mode 100644 index 213a0705eb..0000000000 --- a/arch/arm/dts/meson-gxl-s805x-libretech-ac.dts +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 BayLibre, SAS. - * Author: Neil Armstrong - * Author: Jerome Brunet - */ - -/dts-v1/; - -#include -#include - -#include "meson-gxl-s805x.dtsi" - -/ { - compatible = "libretech,aml-s805x-ac", "amlogic,s805x", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S805X-AC"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - /* - * The pads are present but no connector is soldered on - * 2J2, so keep this off by default. - */ - status = "disabled"; - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - dc_5v: regulator-dc_5v { - compatible = "regulator-fixed"; - regulator-name = "DC_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x20000000>; - }; - - vcck: regulator-vcck { - compatible = "regulator-fixed"; - regulator-name = "VCCK"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_5v>; - - /* - * This is controlled by GPIOAO_9 we reserve this but - * claiming it as done below reset the board anyway - * Need to investigate this - * - * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - * enable-active-high; - */ - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_5v>; - regulator-always-on; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-AC"; - audio-widgets = "Speaker", "9J5-3 LEFT", - "Speaker", "9J5-2 RIGHT"; - audio-routing = "9J5-3 LEFT", "ACODEC LOLN", - "9J5-2 RIGHT", "ACODEC LORN"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; -}; - -&internal_phy { - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&gpio_ao { - gpio-line-names = "UART TX", - "UART RX", - "7J1 Header Pin31", - "", "", "", "", - "IR In", - "HDMI CEC", - "5V VCCK Regulator", - /* GPIO_TEST_N */ - ""; -}; - -&gpio { - gpio-line-names = /* Bank GPIOZ */ - "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "Eth Link LED", "Eth Activity LED", - /* Bank GPIOH */ - "HDMI HPD", "HDMI SDA", "HDMI SCL", - "", "7J1 Header Pin13", - "7J1 Header Pin15", - "7J1 Header Pin7", - "7J1 Header Pin12", - "7J1 Header Pin16", - "7J1 Header Pin18", - /* Bank BOOT */ - "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", - "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", - "eMMC Clk", "eMMC Reset", "eMMC CMD", - "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk", - "", "SPI NOR Chip Select", - /* Bank CARD */ - "", "", "", "", "", "", "", - /* Bank GPIODV */ - "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", - "7J1 Header Pin27", "7J1 Header Pin28", "", - "7J1 Header Pin29", - "VCCK Regulator", "VDDEE Regulator", - /* Bank GPIOX */ - "7J1 Header Pin22", "7J1 Header Pin26", - "7J1 Header Pin36", "7J1 Header Pin38", - "7J1 Header Pin40", "7J1 Header Pin37", - "7J1 Header Pin33", "7J1 Header Pin35", - "7J1 Header Pin19", "7J1 Header Pin21", - "7J1 Header Pin24", "7J1 Header Pin23", - "7J1 Header Pin8", "7J1 Header Pin10", - "", "", "7J1 Header Pin32", "", "", - /* Bank GPIOCLK */ - "", ""; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -&spifc { - status = "okay"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - w25q32: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <3000000>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; diff --git a/arch/arm/dts/meson-gxl-s805x.dtsi b/arch/arm/dts/meson-gxl-s805x.dtsi deleted file mode 100644 index 2997584982..0000000000 --- a/arch/arm/dts/meson-gxl-s805x.dtsi +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 BayLibre SAS - * Author: Neil Armstrong - */ - -#include "meson-gxl-s905x.dtsi" - -/ { - compatible = "amlogic,s805x", "amlogic,meson-gxl"; -}; - -/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */ -&gpu_opp_table { - opp-744000000 { - status = "disabled"; - }; -}; - -&mali { - /delete-property/ assigned-clocks; - /delete-property/ assigned-clock-rates; -}; diff --git a/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts b/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts deleted file mode 100644 index 100a1cfeea..0000000000 --- a/arch/arm/dts/meson-gxl-s905d-libretech-pc.dts +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - * Author: Jerome Brunet - */ - -/dts-v1/; - -#include "meson-gxl-s905d.dtsi" -#include "meson-gx-libretech-pc.dtsi" - -/ { - compatible = "libretech,aml-s905d-pc", "amlogic,s905d", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S905D-PC"; -}; diff --git a/arch/arm/dts/meson-gxl-s905d.dtsi b/arch/arm/dts/meson-gxl-s905d.dtsi deleted file mode 100644 index 4332191954..0000000000 --- a/arch/arm/dts/meson-gxl-s905d.dtsi +++ /dev/null @@ -1,12 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -#include "meson-gxl.dtsi" -#include "meson-gxl-mali.dtsi" - -/ { - compatible = "amlogic,s905d", "amlogic,meson-gxl"; -}; diff --git a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts deleted file mode 100644 index a18d6d241a..0000000000 --- a/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts +++ /dev/null @@ -1,247 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2021 Vyacheslav Bocharov - * Copyright (c) 2020 JetHome - * Author: Aleksandr Kazantsev - * Author: Alexey Shevelkin - * Author: Vyacheslav Bocharov - */ - -/dts-v1/; - -#include "meson-gxl.dtsi" - -/ { - compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl"; - model = "JetHome JetHub J80"; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; - - reserved-memory { - linux,cma { - size = <0x0 0x1000000>; - }; - }; - - aliases { - serial0 = &uart_AO; /* Console */ - serial1 = &uart_A; /* Bluetooth */ - serial2 = &uart_AO_B; /* Wireless module 1 */ - serial3 = &uart_C; /* Wireless module 2 */ - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; -}; - -&efuse { - bt_mac: bt-mac@6 { - reg = <0x6 0x6>; - }; - - wifi_mac: wifi-mac@c { - reg = <0xc 0x6>; - }; -}; - -&sn { - reg = <0x32 0x20>; -}; - -ð_mac { - reg = <0x0 0x6>; -}; - -&bid { - reg = <0x12 0x20>; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* Wireless SDIO Module */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* Console UART */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* S905W only has access to its internal PHY */ -ðmac { - status = "okay"; - phy-mode = "rmii"; - phy-handle = <&internal_phy>; -}; - -&internal_phy { - status = "okay"; - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "realtek,rtl8822cs-bt"; - enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>; - }; -}; - -&uart_C { - status = "okay"; - pinctrl-0 = <&uart_c_pins>; - pinctrl-names = "default"; -}; - -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; -}; - -&i2c_B { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c_b_pins>; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - status = "okay"; - }; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts deleted file mode 100644 index 02f81839d4..0000000000 --- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts +++ /dev/null @@ -1,237 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Martin Blumenstingl . - */ - -/dts-v1/; - -#include "meson-gxl-s905x-p212.dtsi" -#include -#include - -/ { - compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Khadas VIM"; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; - - aliases { - serial2 = &uart_AO_B; - ethernet0 = ðmac; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - led-controller { - compatible = "pwm-leds"; - - led-1 { - label = "vim:red:power"; - pwms = <&pwm_AO_ab 1 7812500 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "KHADAS-VIM"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_A { - status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; -}; - -&i2c_B { - status = "okay"; - pinctrl-0 = <&i2c_b_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - status = "okay"; - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "xin32k"; - }; -}; - -&ir { - linux,rc-map-name = "rc-khadas"; -}; - -&gpio_ao { - gpio-line-names = "UART TX", - "UART RX", - "Power Key In", - "J9 Header Pin35", - "J9 Header Pin16", - "J9 Header Pin15", - "J9 Header Pin33", - "IR In", - "HDMI CEC", - "SYS LED", - /* GPIO_TEST_N */ - ""; -}; - -&gpio { - gpio-line-names = /* Bank GPIOZ */ - "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "Power OFF", - "VCCK Enable", - /* Bank GPIOH */ - "HDMI HPD", "HDMI SDA", "HDMI SCL", - "HDMI_5V_EN", "SPDIF", - "J9 Header Pin37", - "J9 Header Pin30", - "J9 Header Pin29", - "J9 Header Pin32", - "J9 Header Pin31", - /* Bank BOOT */ - "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", - "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", - "eMMC Clk", "eMMC Reset", "eMMC CMD", - "", "BOOT_MODE", "", "", "eMMC Data Strobe", - /* Bank CARD */ - "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", - "SDCard D3", "SDCard D2", "SDCard Det", - /* Bank GPIODV */ - "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", - "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", - "VCCK Regulator", "VDDEE Regulator", - /* Bank GPIOX */ - "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", - "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", - "WIFI Power Enable", "WIFI WAKE HOST", - "Bluetooth PCM DOUT", "Bluetooth PCM DIN", - "Bluetooth PCM SYNC", "Bluetooth PCM CLK", - "Bluetooth UART TX", "Bluetooth UART RX", - "Bluetooth UART CTS", "Bluetooth UART RTS", - "WIFI 32K", "Bluetooth Enable", - "Bluetooth WAKE HOST", - /* Bank GPIOCLK */ - "", "J9 Header Pin39"; -}; - -&pwm_AO_ab { - status = "okay"; - pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; - pinctrl-names = "default"; - clocks = <&xtal> , <&xtal>; - clock-names = "clkin0", "clkin1" ; -}; - -&pwm_ef { - pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; -}; - -&sd_emmc_a { - max-frequency = <100000000>; -}; - -/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ -&uart_AO { - status = "okay"; -}; - -/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&usb { - dr_mode = "peripheral"; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts deleted file mode 100644 index 6c4e68e0e6..0000000000 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc-v2.dts +++ /dev/null @@ -1,313 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 BayLibre, SAS. - * Author: Jerome Brunet - */ - -/dts-v1/; - -#include -#include -#include - -#include "meson-gxl-s905x.dtsi" - -/ { - compatible = "libretech,aml-s905x-cc-v2", "amlogic,s905x", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S905X-CC V2"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - spi0 = &spifc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - panic-indicator; - }; - - led-green { - color = ; - function = LED_FUNCTION_DISK_ACTIVITY; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "disk-activity"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; - }; - - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - vcck: regulator-vcck { - compatible = "regulator-fixed"; - regulator-name = "VCCK"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vcc_card: regulator-vcc_card { - compatible = "regulator-fixed"; - regulator-name = "VCC_CARD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vddio_ao3v3>; - - gpio = <&gpio GPIOCLK_1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vcc5v: regulator-vcc5v { - compatible = "regulator-fixed"; - regulator-name = "VCC5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&ao_5v>; - - gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>; - }; - - vddio_ao3v3: regulator-vddio_ao3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&ao_5v>; - regulator-always-on; - }; - - vddio_card: regulator-vddio-card { - compatible = "regulator-gpio"; - regulator-name = "VDDIO_CARD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - - regulator-settling-time-up-us = <200>; - regulator-settling-time-down-us = <50000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddio_ao3v3>; - regulator-always-on; - }; - - vcc_1v8: regulator-vcc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "VCC 1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddio_ao3v3>; - regulator-always-on; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-CC-V2"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -ðmac { - status = "okay"; -}; - -&internal_phy { - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - hdmi-supply = <&vcc5v>; - pinctrl-names = "default"; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* SD card */ -&sd_emmc_b { - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-ddr50; - max-frequency = <100000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_card>; - vqmmc-supply = <&vddio_card>; - - status = "okay"; -}; - -/* eMMC */ -&sd_emmc_c { - pinctrl-0 = <&emmc_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vddio_ao3v3>; - vqmmc-supply = <&vcc_1v8>; - - status = "okay"; -}; - -&spifc { - status = "okay"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - nor_4u1: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <3000000>; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - phy-supply = <&vcc5v>; -}; - -&usb2_phy1 { - phy-supply = <&vcc5v>; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts deleted file mode 100644 index 82bfabfbd3..0000000000 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts +++ /dev/null @@ -1,356 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 BayLibre, SAS. - * Author: Neil Armstrong - * Author: Jerome Brunet - */ - -/dts-v1/; - -#include -#include - -#include "meson-gxl-s905x.dtsi" - -/ { - compatible = "libretech,aml-s905x-cc", "amlogic,s905x", - "amlogic,meson-gxl"; - model = "Libre Computer AML-S905X-CC"; - - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&hdmi_5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - led-system { - label = "librecomputer:system-status"; - gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - panic-indicator; - }; - - led-blue { - label = "librecomputer:blue"; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vcc_card: regulator-vcc-card { - compatible = "regulator-gpio"; - - regulator-name = "VCC_CARD"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; - gpios-states = <0>; - - states = <3300000 0>, - <1800000 1>; - - regulator-settling-time-up-us = <200>; - regulator-settling-time-down-us = <50000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - /* This is provided by LDOs on the eMMC daugther card */ - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "LIBRETECH-CC"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Line", "Lineout"; - audio-routing = "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "Lineout", "AU2 OUTL", - "Lineout", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -ðmac { - status = "okay"; -}; - -&internal_phy { - pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; - pinctrl-names = "default"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&gpio_ao { - gpio-line-names = "UART TX", - "UART RX", - "Blue LED", - "SDCard Voltage Switch", - "7J1 Header Pin5", - "7J1 Header Pin3", - "7J1 Header Pin12", - "IR In", - "9J3 Switch HDMI CEC/7J1 Header Pin11", - "7J1 Header Pin13", - /* GPIO_TEST_N */ - "7J1 Header Pin15"; -}; - -&gpio { - gpio-line-names = /* Bank GPIOZ */ - "", "", "", "", "", "", "", - "", "", "", "", "", "", "", - "Eth Link LED", "Eth Activity LED", - /* Bank GPIOH */ - "HDMI HPD", "HDMI SDA", "HDMI SCL", - "HDMI_5V_EN", "9J1 Header Pin2", - "Analog Audio Mute", - "2J3 Header Pin6", - "2J3 Header Pin5", - "2J3 Header Pin4", - "2J3 Header Pin3", - /* Bank BOOT */ - "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", - "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", - "eMMC Clk", "eMMC Reset", "eMMC CMD", - "ALT BOOT MODE", "", "", "", "eMMC Data Strobe", - /* Bank CARD */ - "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", - "SDCard D3", "SDCard D2", "SDCard Det", - /* Bank GPIODV */ - "", "", "", "", "", "", "", "", "", "", "", "", - "", "", "", "", "", "", "", "", "", "", "", "", - "Green LED", "VCCK Enable", - "7J1 Header Pin27", "7J1 Header Pin28", - "VCCK Regulator", "VDDEE Regulator", - /* Bank GPIOX */ - "7J1 Header Pin22", "7J1 Header Pin26", - "7J1 Header Pin36", "7J1 Header Pin38", - "7J1 Header Pin40", "7J1 Header Pin37", - "7J1 Header Pin33", "7J1 Header Pin35", - "7J1 Header Pin19", "7J1 Header Pin21", - "7J1 Header Pin24", "7J1 Header Pin23", - "7J1 Header Pin8", "7J1 Header Pin10", - "7J1 Header Pin16", "7J1 Header Pin18", - "7J1 Header Pin32", "7J1 Header Pin29", - "7J1 Header Pin31", - /* Bank GPIOCLK */ - "7J1 Header Pin7", ""; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_card>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - max-frequency = <200000000>; - disable-wp; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - /* - * even though the schematics don't show it: - * HDMI_5V is also used as supply for the USB VBUS. - */ - phy-supply = <&hdmi_5v>; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dts b/arch/arm/dts/meson-gxl-s905x-p212.dts deleted file mode 100644 index 9b4ea6a493..0000000000 --- a/arch/arm/dts/meson-gxl-s905x-p212.dts +++ /dev/null @@ -1,134 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -/dts-v1/; - -#include "meson-gxl-s905x-p212.dtsi" -#include - -/ { - compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; - model = "Amlogic Meson GXL (S905X) P212 Development Board"; - - dio2133: analog-amplifier { - compatible = "simple-audio-amplifier"; - sound-name-prefix = "AU2"; - VCC-supply = <&hdmi_5v>; - enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; - }; - - cvbs-connector { - compatible = "composite-video-connector"; - - port { - cvbs_connector_in: endpoint { - remote-endpoint = <&cvbs_vdac_out>; - }; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "S905X-P212"; - audio-aux-devs = <&dio2133>; - audio-widgets = "Line", "Lineout"; - audio-routing = "AU2 INL", "ACODEC LOLN", - "AU2 INR", "ACODEC LORN", - "Lineout", "AU2 OUTL", - "Lineout", "AU2 OUTR"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - - codec-1 { - sound-dai = <&aiu AIU_ACODEC CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - - dai-link-3 { - sound-dai = <&aiu AIU_ACODEC CTRL_OUT>; - - codec-0 { - sound-dai = <&acodec>; - }; - }; - }; -}; - -&acodec { - AVDD-supply = <&vddio_ao18>; - status = "okay"; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cvbs_vdac_port { - cvbs_vdac_out: endpoint { - remote-endpoint = <&cvbs_connector_in>; - }; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -/* This UART is brought out to the DB9 connector */ -&uart_AO { - status = "okay"; -}; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi deleted file mode 100644 index a150cc0e18..0000000000 --- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi +++ /dev/null @@ -1,213 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Martin Blumenstingl . - * Based on meson-gx-p23x-q20x.dtsi: - * - Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - * - Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong - */ - -/* Common DTSI for devices which are based on the P212 reference board. */ - -#include "meson-gxl-s905x.dtsi" - -/ { - aliases { - serial0 = &uart_AO; - ethernet0 = ðmac; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; -}; - -ðmac { - status = "okay"; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -/* Wireless SDIO Module */ -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* This is connected to the Bluetooth module: */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -&usb { - status = "okay"; - dr_mode = "host"; -}; - -&usb2_phy0 { - /* - * HDMI_5V is also used as supply for the USB VBUS. - */ - phy-supply = <&hdmi_5v>; -}; diff --git a/arch/arm/dts/meson-gxl-s905x.dtsi b/arch/arm/dts/meson-gxl-s905x.dtsi deleted file mode 100644 index 40c19f69e9..0000000000 --- a/arch/arm/dts/meson-gxl-s905x.dtsi +++ /dev/null @@ -1,18 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -#include "meson-gxl.dtsi" -#include "meson-gxl-mali.dtsi" - -/ { - compatible = "amlogic,s905x", "amlogic,meson-gxl"; -}; - -/* S905X only has access to its internal PHY */ -ðmac { - phy-mode = "rmii"; - phy-handle = <&internal_phy>; -}; diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi deleted file mode 100644 index 17bcfa4702..0000000000 --- a/arch/arm/dts/meson-gxl.dtsi +++ /dev/null @@ -1,940 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -#include "meson-gx.dtsi" -#include -#include -#include -#include - -/ { - compatible = "amlogic,meson-gxl"; - - soc { - usb: usb@d0078080 { - compatible = "amlogic,meson-gxl-usb-ctrl"; - reg = <0x0 0xd0078080 0x0 0x20>; - interrupts = ; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "usb_ctrl", "ddr"; - resets = <&reset RESET_USB_OTG>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>; - phy-names = "usb2-phy0", "usb2-phy1"; - - dwc2: usb@c9100000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xc9100000 0x0 0x40000>; - interrupts = ; - clocks = <&clkc CLKID_USB1>; - clock-names = "otg"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@c9000000 { - compatible = "snps,dwc3"; - reg = <0x0 0xc9000000 0x0 0x100000>; - interrupts = ; - dr_mode = "host"; - maximum-speed = "high-speed"; - snps,dis_u2_susphy_quirk; - }; - }; - - acodec: audio-controller@c8832000 { - compatible = "amlogic,t9015"; - reg = <0x0 0xc8832000 0x0 0x14>; - #sound-dai-cells = <0>; - sound-name-prefix = "ACODEC"; - clocks = <&clkc CLKID_ACODEC>; - clock-names = "pclk"; - resets = <&reset RESET_ACODEC>; - status = "disabled"; - }; - - crypto: crypto@c883e000 { - compatible = "amlogic,gxl-crypto"; - reg = <0x0 0xc883e000 0x0 0x36>; - interrupts = , - ; - clocks = <&clkc CLKID_BLKMV>; - clock-names = "blkmv"; - status = "okay"; - }; - }; -}; - -&aiu { - compatible = "amlogic,aiu-gxl", "amlogic,aiu"; - clocks = <&clkc CLKID_AIU_GLUE>, - <&clkc CLKID_I2S_OUT>, - <&clkc CLKID_AOCLK_GATE>, - <&clkc CLKID_CTS_AMCLK>, - <&clkc CLKID_MIXER_IFACE>, - <&clkc CLKID_IEC958>, - <&clkc CLKID_IEC958_GATE>, - <&clkc CLKID_CTS_MCLK_I958>, - <&clkc CLKID_CTS_I958>; - clock-names = "pclk", - "i2s_pclk", - "i2s_aoclk", - "i2s_mclk", - "i2s_mixer", - "spdif_pclk", - "spdif_aoclk", - "spdif_mclk", - "spdif_mclk_sel"; - resets = <&reset RESET_AIU>; -}; - -&apb { - usb2_phy0: phy@78000 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78000 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; - - usb2_phy1: phy@78020 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78020 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; -}; - -&efuse { - clocks = <&clkc CLKID_EFUSE>; -}; - -ðmac { - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; -}; - -&aobus { - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-gxl-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_aobus 0 0 14>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts { - mux { - groups = "uart_cts_ao_a", - "uart_rts_ao_a"; - function = "uart_ao"; - bias-disable; - }; - }; - - uart_ao_b_pins: uart_ao_b { - mux { - groups = "uart_tx_ao_b", "uart_rx_ao_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_0_1_pins: uart_ao_b_0_1 { - mux { - groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { - mux { - groups = "uart_cts_ao_b", - "uart_rts_ao_b"; - function = "uart_ao_b"; - bias-disable; - }; - }; - - remote_input_ao_pins: remote_input_ao { - mux { - groups = "remote_input_ao"; - function = "remote_input_ao"; - bias-disable; - }; - }; - - i2c_ao_pins: i2c_ao { - mux { - groups = "i2c_sck_ao", - "i2c_sda_ao"; - function = "i2c_ao"; - bias-disable; - }; - }; - - pwm_ao_a_3_pins: pwm_ao_a_3 { - mux { - groups = "pwm_ao_a_3"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_a_8_pins: pwm_ao_a_8 { - mux { - groups = "pwm_ao_a_8"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_b_pins: pwm_ao_b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - pwm_ao_b_6_pins: pwm_ao_b_6 { - mux { - groups = "pwm_ao_b_6"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - i2s_out_ch23_ao_pins: i2s_out_ch23_ao { - mux { - groups = "i2s_out_ch23_ao"; - function = "i2s_out_ao"; - bias-disable; - }; - }; - - i2s_out_ch45_ao_pins: i2s_out_ch45_ao { - mux { - groups = "i2s_out_ch45_ao"; - function = "i2s_out_ao"; - bias-disable; - }; - }; - - spdif_out_ao_6_pins: spdif_out_ao_6 { - mux { - groups = "spdif_out_ao_6"; - function = "spdif_out_ao"; - bias-disable; - }; - }; - - spdif_out_ao_9_pins: spdif_out_ao_9 { - mux { - groups = "spdif_out_ao_9"; - function = "spdif_out_ao"; - bias-disable; - }; - }; - - ao_cec_pins: ao_cec { - mux { - groups = "ao_cec"; - function = "cec_ao"; - bias-disable; - }; - }; - - ee_cec_pins: ee_cec { - mux { - groups = "ee_cec"; - function = "cec_ao"; - bias-disable; - }; - }; - }; -}; - -&cec_AO { - clocks = <&clkc_AO CLKID_AO_CEC_32K>; - clock-names = "core"; -}; - -&clkc_AO { - compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; -}; - -&gpio_intc { - compatible = "amlogic,meson-gxl-gpio-intc", - "amlogic,meson-gpio-intc"; - status = "okay"; -}; - -&hdmi_tx { - compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMI_SYSTEM_RESET>, - <&reset RESET_HDMI_TX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; - clock-names = "isfr", "iahb", "venci"; -}; - -&sysctrl { - clkc: clock-controller { - compatible = "amlogic,gxl-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; -}; - -&hwrng { - clocks = <&clkc CLKID_RNG0>; - clock-names = "core"; -}; - -&i2c_A { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_AO { - clocks = <&clkc CLKID_AO_I2C>; -}; - -&i2c_B { - clocks = <&clkc CLKID_I2C>; -}; - -&i2c_C { - clocks = <&clkc CLKID_I2C>; -}; - -&periphs { - pinctrl_periphs: pinctrl@4b0 { - compatible = "amlogic,meson-gxl-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@4b0 { - reg = <0x0 0x004b0 0x0 0x28>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00520 0x0 0x14>, - <0x0 0x00430 0x0 0x40>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 0 100>; - }; - - emmc_pins: emmc { - mux-0 { - groups = "emmc_nand_d07", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_ds"; - function = "emmc"; - bias-pull-down; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - nor_pins: nor { - mux { - groups = "nor_d", - "nor_q", - "nor_c", - "nor_cs"; - function = "nor"; - bias-disable; - }; - }; - - spi_pins: spi-pins { - mux { - groups = "spi_miso", - "spi_mosi", - "spi_sclk"; - function = "spi"; - bias-disable; - }; - }; - - spi_idle_high_pins: spi-idle-high-pins { - mux { - groups = "spi_sclk"; - bias-pull-up; - }; - }; - - spi_idle_low_pins: spi-idle-low-pins { - mux { - groups = "spi_sclk"; - bias-pull-down; - }; - }; - - spi_ss0_pins: spi-ss0 { - mux { - groups = "spi_ss0"; - function = "spi"; - bias-disable; - }; - }; - - sdcard_pins: sdcard { - mux-0 { - groups = "sdcard_d0", - "sdcard_d1", - "sdcard_d2", - "sdcard_d3", - "sdcard_cmd"; - function = "sdcard"; - bias-pull-up; - }; - - mux-1 { - groups = "sdcard_clk"; - function = "sdcard"; - bias-disable; - }; - }; - - sdcard_clk_gate_pins: sdcard_clk_gate { - mux { - groups = "CARD_2"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - sdio_pins: sdio { - mux-0 { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd"; - function = "sdio"; - bias-pull-up; - }; - - mux-1 { - groups = "sdio_clk"; - function = "sdio"; - bias-disable; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - }; - }; - - sdio_irq_pins: sdio_irq { - mux { - groups = "sdio_irq"; - function = "sdio"; - bias-disable; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart_a_cts_rts { - mux { - groups = "uart_cts_a", - "uart_rts_a"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart_b { - mux { - groups = "uart_tx_b", - "uart_rx_b"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_b_cts_rts_pins: uart_b_cts_rts { - mux { - groups = "uart_cts_b", - "uart_rts_b"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart_c { - mux { - groups = "uart_tx_c", - "uart_rx_c"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart_c_cts_rts { - mux { - groups = "uart_cts_c", - "uart_rts_c"; - function = "uart_c"; - bias-disable; - }; - }; - - i2c_a_pins: i2c_a { - mux { - groups = "i2c_sck_a", - "i2c_sda_a"; - function = "i2c_a"; - bias-disable; - }; - }; - - i2c_b_pins: i2c_b { - mux { - groups = "i2c_sck_b", - "i2c_sda_b"; - function = "i2c_b"; - bias-disable; - }; - }; - - i2c_c_pins: i2c_c { - mux { - groups = "i2c_sck_c", - "i2c_sda_c"; - function = "i2c_c"; - bias-disable; - }; - }; - - i2c_c_dv18_pins: i2c_c_dv18 { - mux { - groups = "i2c_sck_c_dv19", - "i2c_sda_c_dv18"; - function = "i2c_c"; - bias-disable; - }; - }; - - eth_pins: eth_c { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_clk_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_rxd2", - "eth_rxd3", - "eth_rgmii_tx_clk", - "eth_tx_en", - "eth_txd0", - "eth_txd1", - "eth_txd2", - "eth_txd3"; - function = "eth"; - bias-disable; - }; - }; - - eth_link_led_pins: eth_link_led { - mux { - groups = "eth_link_led"; - function = "eth_led"; - bias-disable; - }; - }; - - eth_act_led_pins: eth_act_led { - mux { - groups = "eth_act_led"; - function = "eth_led"; - }; - }; - - pwm_a_pins: pwm_a { - mux { - groups = "pwm_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_pins: pwm_b { - mux { - groups = "pwm_b"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_pins: pwm_c { - mux { - groups = "pwm_c"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_pins: pwm_d { - mux { - groups = "pwm_d"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_e_pins: pwm_e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - bias-disable; - }; - }; - - pwm_f_clk_pins: pwm_f_clk { - mux { - groups = "pwm_f_clk"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_x_pins: pwm_f_x { - mux { - groups = "pwm_f_x"; - function = "pwm_f"; - bias-disable; - }; - }; - - hdmi_hpd_pins: hdmi_hpd { - mux { - groups = "hdmi_hpd"; - function = "hdmi_hpd"; - bias-disable; - }; - }; - - hdmi_i2c_pins: hdmi_i2c { - mux { - groups = "hdmi_sda", "hdmi_scl"; - function = "hdmi_i2c"; - bias-disable; - }; - }; - - i2s_am_clk_pins: i2s_am_clk { - mux { - groups = "i2s_am_clk"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2s_out_ao_clk_pins: i2s_out_ao_clk { - mux { - groups = "i2s_out_ao_clk"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2s_out_lr_clk_pins: i2s_out_lr_clk { - mux { - groups = "i2s_out_lr_clk"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2s_out_ch01_pins: i2s_out_ch01 { - mux { - groups = "i2s_out_ch01"; - function = "i2s_out"; - bias-disable; - }; - }; - i2sout_ch23_z_pins: i2sout_ch23_z { - mux { - groups = "i2sout_ch23_z"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2sout_ch45_z_pins: i2sout_ch45_z { - mux { - groups = "i2sout_ch45_z"; - function = "i2s_out"; - bias-disable; - }; - }; - - i2sout_ch67_z_pins: i2sout_ch67_z { - mux { - groups = "i2sout_ch67_z"; - function = "i2s_out"; - bias-disable; - }; - }; - - spdif_out_h_pins: spdif_out_ao_h { - mux { - groups = "spdif_out_h"; - function = "spdif_out"; - bias-disable; - }; - }; - }; - - eth_phy_mux: mdio@558 { - reg = <0x0 0x558 0x0 0xc>; - compatible = "amlogic,gxl-mdio-mux"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "ref"; - mdio-parent-bus = <&mdio0>; - - external_mdio: mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - internal_mdio: mdio@1 { - reg = <0x1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_phy: ethernet-phy@8 { - compatible = "ethernet-phy-id0181.4400"; - interrupts = ; - reg = <8>; - max-speed = <100>; - }; - }; - }; -}; - -&pwrc { - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_DVIN_RESET>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - reset-names = "viu", "venc", "vcbus", "bt656", - "dvin", "rdma", "venci", "vencp", - "vdac", "vdi6", "vencl", "vid_lock"; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ -}; - -&saradc { - compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; - clocks = <&xtal>, - <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SAR_ADC_CLK>, - <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; -}; - -&sd_emmc_a { - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; -}; - -&sd_emmc_b { - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; -}; - -&sd_emmc_c { - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; -}; - -&simplefb_hdmi { - clocks = <&clkc CLKID_HDMI_PCLK>, - <&clkc CLKID_CLK81>, - <&clkc CLKID_GCLK_VENCI_INT0>; -}; - -&spicc { - clocks = <&clkc CLKID_SPICC>; - clock-names = "core"; - resets = <&reset RESET_PERIPHS_SPICC>; - num-cs = <1>; -}; - -&spifc { - clocks = <&clkc CLKID_SPI>; -}; - -&uart_A { - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_AO { - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_AO_B { - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_B { - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&uart_C { - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; -}; - -&vpu { - compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; - power-domains = <&pwrc PWRC_GXBB_VPU_ID>; -}; - -&vdec { - compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; - clocks = <&clkc CLKID_DOS_PARSER>, - <&clkc CLKID_DOS>, - <&clkc CLKID_VDEC_1>, - <&clkc CLKID_VDEC_HEVC>; - clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; - resets = <&reset RESET_PARSER>; - reset-names = "esparser"; -}; diff --git a/arch/arm/dts/meson-gxm-gt1-ultimate.dts b/arch/arm/dts/meson-gxm-gt1-ultimate.dts deleted file mode 100644 index 2c267884cc..0000000000 --- a/arch/arm/dts/meson-gxm-gt1-ultimate.dts +++ /dev/null @@ -1,91 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) Christian Hewitt - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include "meson-gx-p23x-q20x.dtsi" -#include -#include - -/ { - compatible = "azw,gt1-ultimate", "amlogic,s912", "amlogic,meson-gxm"; - model = "Beelink GT1 Ultimate"; - - leds { - compatible = "gpio-leds"; - - led-white { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - panic-indicator; - }; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "update"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>; - pinctrl-names = "default"; - phy-handle = <&external_phy>; - amlogic,tx-delay-ns = <2>; - phy-mode = "rgmii"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - max-speed = <1000>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_15 */ - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&ir { - linux,rc-map-name = "rc-beelink-gs1"; -}; - -&sd_emmc_a { - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; diff --git a/arch/arm/dts/meson-gxm-khadas-vim2.dts b/arch/arm/dts/meson-gxm-khadas-vim2.dts deleted file mode 100644 index 74897a1548..0000000000 --- a/arch/arm/dts/meson-gxm-khadas-vim2.dts +++ /dev/null @@ -1,424 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2017 Martin Blumenstingl . - * Copyright (c) 2017 BayLibre, SAS - * Author: Neil Armstrong - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include -#include - -/ { - compatible = "khadas,vim2", "amlogic,s912", "amlogic,meson-gxm"; - model = "Khadas VIM2"; - - aliases { - serial0 = &uart_AO; - serial2 = &uart_AO_B; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-function { - label = "Function"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; - }; - - gpio_fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio GPIODV_14 GPIO_ACTIVE_HIGH - &gpio GPIODV_15 GPIO_ACTIVE_HIGH>; - /* Dummy RPM values since fan is optional */ - gpio-fan,speed-map = - <0 0>, - <1 1>, - <2 2>, - <3 3>; - #cooling-cells = <2>; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - power-button { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; - - hdmi-connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_tx_tmds_out>; - }; - }; - }; - - led-controller { - compatible = "pwm-leds"; - - led-1 { - label = "vim:red:power"; - pwms = <&pwm_AO_ab 1 7812500 0>; - max-brightness = <255>; - linux,default-trigger = "default-on"; - }; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; - clocks = <&wifi32k>; - clock-names = "ext_clock"; - }; - - hdmi_5v: regulator-hdmi-5v { - compatible = "regulator-fixed"; - - regulator-name = "HDMI_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - }; - - vcc_3v3: regulator-vcc_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vddio_ao18: regulator-vddio_ao18 { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_AO18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddio_boot: regulator-vddio_boot { - compatible = "regulator-fixed"; - regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddao_3v3: regulator-vddao_3v3 { - compatible = "regulator-fixed"; - regulator-name = "VDDAO_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - wifi32k: wifi32k { - compatible = "pwm-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ - }; - - sound { - compatible = "amlogic,gx-sound-card"; - model = "KHADAS-VIM2"; - assigned-clocks = <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>; - assigned-clock-parents = <0>, <0>, <0>; - assigned-clock-rates = <294912000>, - <270950400>, - <393216000>; - status = "okay"; - - dai-link-0 { - sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>; - }; - - dai-link-1 { - sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>; - dai-format = "i2s"; - mclk-fs = <256>; - - codec-0 { - sound-dai = <&aiu AIU_HDMI CTRL_I2S>; - }; - }; - - dai-link-2 { - sound-dai = <&aiu AIU_HDMI CTRL_OUT>; - - codec-0 { - sound-dai = <&hdmi_tx>; - }; - }; - }; -}; - -&aiu { - status = "okay"; -}; - -&cec_AO { - status = "okay"; - pinctrl-0 = <&ao_cec_pins>; - pinctrl-names = "default"; - hdmi-phandle = <&hdmi_tx>; -}; - -&cpu_cooling_maps { - map0 { - cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>; - }; - - map1 { - cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>, - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -ðmac { - pinctrl-0 = <ð_pins>; - pinctrl-names = "default"; - - /* Select external PHY by default */ - phy-handle = <&external_phy>; - - amlogic,tx-delay-ns = <2>; - - /* External PHY is in RGMII */ - phy-mode = "rgmii"; - - status = "okay"; -}; - -&external_mdio { - external_phy: ethernet-phy@0 { - /* Realtek RTL8211F (0x001cc916) */ - reg = <0>; - - reset-assert-us = <10000>; - reset-deassert-us = <80000>; - reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; - - interrupt-parent = <&gpio_intc>; - /* MAC_INTR on GPIOZ_15 */ - interrupts = <25 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -&hdmi_tx { - status = "okay"; - pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; - pinctrl-names = "default"; - hdmi-supply = <&hdmi_5v>; -}; - -&hdmi_tx_tmds_port { - hdmi_tx_tmds_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - }; -}; - -&i2c_A { - status = "okay"; - pinctrl-0 = <&i2c_a_pins>; - pinctrl-names = "default"; -}; - -&i2c_B { - status = "okay"; - pinctrl-0 = <&i2c_b_pins>; - pinctrl-names = "default"; - - rtc: rtc@51 { - status = "okay"; - compatible = "haoyu,hym8563"; - reg = <0x51>; - #clock-cells = <0>; - clock-output-names = "xin32k"; - }; -}; - -&ir { - status = "okay"; - pinctrl-0 = <&remote_input_ao_pins>; - pinctrl-names = "default"; - linux,rc-map-name = "rc-khadas"; -}; - -&pwm_AO_ab { - status = "okay"; - pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&pwm_ef { - status = "okay"; - pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; - pinctrl-names = "default"; - clocks = <&clkc CLKID_FCLK_DIV4>; - clock-names = "clkin0"; -}; - -&sd_emmc_a { - status = "okay"; - pinctrl-0 = <&sdio_pins>; - pinctrl-1 = <&sdio_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - #address-cells = <1>; - #size-cells = <0>; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <100000000>; - - non-removable; - disable-wp; - - /* WiFi firmware requires power to be kept while in suspend */ - keep-power-in-suspend; - - mmc-pwrseq = <&sdio_pwrseq>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - }; -}; - -/* SD card */ -&sd_emmc_b { - status = "okay"; - pinctrl-0 = <&sdcard_pins>; - pinctrl-1 = <&sdcard_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <4>; - cap-sd-highspeed; - max-frequency = <50000000>; - disable-wp; - - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vddao_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* eMMC */ -&sd_emmc_c { - status = "okay"; - pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-1 = <&emmc_clk_gate_pins>; - pinctrl-names = "default", "clk-gate"; - - bus-width = <8>; - cap-mmc-highspeed; - max-frequency = <200000000>; - non-removable; - disable-wp; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vddio_boot>; -}; - -/* - * EMMC_DS pin is shared between SPI NOR CS and eMMC Data Strobe - * Remove emmc_ds_pins from sd_emmc_c pinctrl-0 then spifc can be enabled - */ -&spifc { - status = "disabled"; - pinctrl-0 = <&nor_pins>; - pinctrl-names = "default"; - - w25q32: flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q16", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <104000000>; - }; -}; - -/* This one is connected to the Bluetooth module */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; - -/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ -&uart_AO { - status = "okay"; - pinctrl-0 = <&uart_ao_a_pins>; - pinctrl-names = "default"; -}; - -/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ -&uart_AO_B { - status = "okay"; - pinctrl-0 = <&uart_ao_b_pins>; - pinctrl-names = "default"; -}; - -&saradc { - status = "okay"; - vref-supply = <&vddio_ao18>; -}; - -&usb { - status = "okay"; - dr_mode = "peripheral"; -}; diff --git a/arch/arm/dts/meson-gxm-s912-libretech-pc.dts b/arch/arm/dts/meson-gxm-s912-libretech-pc.dts deleted file mode 100644 index 444c249863..0000000000 --- a/arch/arm/dts/meson-gxm-s912-libretech-pc.dts +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2019 BayLibre SAS. All rights reserved. - * Author: Jerome Brunet - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include "meson-gx-libretech-pc.dtsi" - -/ { - compatible = "libretech,aml-s912-pc", "amlogic,s912", - "amlogic,meson-gxm"; - model = "Libre Computer AML-S912-PC"; - - typec2_vbus: regulator-typec2_vbus { - compatible = "regulator-fixed"; - regulator-name = "TYPEC2_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc5v>; - - gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; -}; - -&pinctrl_periphs { - /* - * Make sure the irq pin of the TYPE C controller is not driven - * by the SoC. - */ - fusb302_irq_pins: fusb302_irq { - mux { - groups = "GPIODV_0"; - function = "gpio_periphs"; - bias-pull-up; - output-disable; - }; - }; -}; - -&i2c_C { - fusb302@22 { - compatible = "fcs,fusb302"; - reg = <0x22>; - - pinctrl-0 = <&fusb302_irq_pins>; - pinctrl-names = "default"; - interrupt-parent = <&gpio_intc>; - interrupts = <59 IRQ_TYPE_LEVEL_LOW>; - - vbus-supply = <&typec2_vbus>; - - status = "okay"; - }; -}; - -&usb2_phy2 { - phy-supply = <&typec2_vbus>; -}; diff --git a/arch/arm/dts/meson-gxm-wetek-core2.dts b/arch/arm/dts/meson-gxm-wetek-core2.dts deleted file mode 100644 index f8c40340b9..0000000000 --- a/arch/arm/dts/meson-gxm-wetek-core2.dts +++ /dev/null @@ -1,85 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Christian Hewitt - */ - -/dts-v1/; - -#include "meson-gxm.dtsi" -#include "meson-gx-p23x-q20x.dtsi" -#include -#include - -/ { - compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm"; - model = "WeTek Core 2"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ - }; - - leds { - compatible = "gpio-leds"; - - led-blue { - color = ; - function = LED_FUNCTION_STATUS; - gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 0>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1710000>; - - button-update { - label = "update"; - linux,code = ; - press-threshold-microvolt = <10000>; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - button-power { - label = "power"; - linux,code = ; - gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; - }; - }; -}; - -/* Disabled as Realtek RTL8152 USB provides Ethernet */ -ðmac { - status = "disabled"; -}; - -&internal_phy { - status = "disabled"; -}; - -&ir { - linux,rc-map-name = "rc-wetek-play2"; -}; - -/* This is connected to the Bluetooth module: */ -&uart_A { - status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; - - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - max-speed = <2000000>; - clocks = <&wifi32k>; - clock-names = "lpo"; - }; -}; diff --git a/arch/arm/dts/meson-gxm.dtsi b/arch/arm/dts/meson-gxm.dtsi deleted file mode 100644 index 411cc312fc..0000000000 --- a/arch/arm/dts/meson-gxm.dtsi +++ /dev/null @@ -1,216 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2016 Endless Computers, Inc. - * Author: Carlo Caione - */ - -#include "meson-gxl.dtsi" - -/ { - compatible = "amlogic,meson-gxm"; - - cpus { - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - core2 { - cpu = <&cpu2>; - }; - core3 { - cpu = <&cpu3>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu4>; - }; - core1 { - cpu = <&cpu5>; - }; - core2 { - cpu = <&cpu6>; - }; - core3 { - cpu = <&cpu7>; - }; - }; - }; - - cpu0: cpu@0 { - capacity-dmips-mhz = <1024>; - }; - - cpu1: cpu@1 { - capacity-dmips-mhz = <1024>; - }; - - cpu2: cpu@2 { - capacity-dmips-mhz = <1024>; - }; - - cpu3: cpu@3 { - capacity-dmips-mhz = <1024>; - }; - - cpu4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - - cpu5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x101>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - - cpu6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x102>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - - cpu7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0 0x103>; - enable-method = "psci"; - capacity-dmips-mhz = <1024>; - next-level-cache = <&l2>; - clocks = <&scpi_dvfs 1>; - #cooling-cells = <2>; - }; - }; - - gpu_opp_table: opp-table { - compatible = "operating-points-v2"; - - opp-125000000 { - opp-hz = /bits/ 64 <125000000>; - opp-microvolt = <950000>; - }; - opp-250000000 { - opp-hz = /bits/ 64 <250000000>; - opp-microvolt = <950000>; - }; - opp-285714285 { - opp-hz = /bits/ 64 <285714285>; - opp-microvolt = <950000>; - }; - opp-400000000 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <950000>; - }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <950000>; - }; - opp-666666666 { - opp-hz = /bits/ 64 <666666666>; - opp-microvolt = <950000>; - }; - }; -}; - -&apb { - usb2_phy2: phy@78040 { - compatible = "amlogic,meson-gxl-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0x78040 0x0 0x20>; - clocks = <&clkc CLKID_USB>; - clock-names = "phy"; - resets = <&reset RESET_USB_OTG>; - reset-names = "phy"; - status = "okay"; - }; - - mali: gpu@c0000 { - compatible = "amlogic,meson-gxm-mali", "arm,mali-t820"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = , - , - ; - interrupt-names = "job", "mmu", "gpu"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; - operating-points-v2 = <&gpu_opp_table>; - }; -}; - -&clkc_AO { - compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc"; -}; - -&cpu_cooling_maps { - map0 { - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - - map1 { - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; -}; - -&saradc { - compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc"; -}; - -&scpi_dvfs { - clock-indices = <0 1>; - clock-output-names = "vbig", "vlittle"; -}; - -&vpu { - compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; -}; - -&hdmi_tx { - compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; -}; - -&usb { - compatible = "amlogic,meson-gxm-usb-ctrl"; - - phy-names = "usb2-phy0", "usb2-phy1", "usb2-phy2"; - phys = <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; -}; - -&vdec { - compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec"; -}; diff --git a/include/dt-bindings/gpio/meson-axg-gpio.h b/include/dt-bindings/gpio/meson-axg-gpio.h deleted file mode 100644 index 25bb1fffa9..0000000000 --- a/include/dt-bindings/gpio/meson-axg-gpio.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Copyright (c) 2017 Amlogic, Inc. All rights reserved. - * Author: Xingyu Chen - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _DT_BINDINGS_MESON_AXG_GPIO_H -#define _DT_BINDINGS_MESON_AXG_GPIO_H - -/* First GPIO chip */ -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIOAO_10 10 -#define GPIOAO_11 11 -#define GPIOAO_12 12 -#define GPIOAO_13 13 -#define GPIO_TEST_N 14 - -/* Second GPIO chip */ -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define BOOT_0 11 -#define BOOT_1 12 -#define BOOT_2 13 -#define BOOT_3 14 -#define BOOT_4 15 -#define BOOT_5 16 -#define BOOT_6 17 -#define BOOT_7 18 -#define BOOT_8 19 -#define BOOT_9 20 -#define BOOT_10 21 -#define BOOT_11 22 -#define BOOT_12 23 -#define BOOT_13 24 -#define BOOT_14 25 -#define GPIOA_0 26 -#define GPIOA_1 27 -#define GPIOA_2 28 -#define GPIOA_3 29 -#define GPIOA_4 30 -#define GPIOA_5 31 -#define GPIOA_6 32 -#define GPIOA_7 33 -#define GPIOA_8 34 -#define GPIOA_9 35 -#define GPIOA_10 36 -#define GPIOA_11 37 -#define GPIOA_12 38 -#define GPIOA_13 39 -#define GPIOA_14 40 -#define GPIOA_15 41 -#define GPIOA_16 42 -#define GPIOA_17 43 -#define GPIOA_18 44 -#define GPIOA_19 45 -#define GPIOA_20 46 -#define GPIOX_0 47 -#define GPIOX_1 48 -#define GPIOX_2 49 -#define GPIOX_3 50 -#define GPIOX_4 51 -#define GPIOX_5 52 -#define GPIOX_6 53 -#define GPIOX_7 54 -#define GPIOX_8 55 -#define GPIOX_9 56 -#define GPIOX_10 57 -#define GPIOX_11 58 -#define GPIOX_12 59 -#define GPIOX_13 60 -#define GPIOX_14 61 -#define GPIOX_15 62 -#define GPIOX_16 63 -#define GPIOX_17 64 -#define GPIOX_18 65 -#define GPIOX_19 66 -#define GPIOX_20 67 -#define GPIOX_21 68 -#define GPIOX_22 69 -#define GPIOY_0 70 -#define GPIOY_1 71 -#define GPIOY_2 72 -#define GPIOY_3 73 -#define GPIOY_4 74 -#define GPIOY_5 75 -#define GPIOY_6 76 -#define GPIOY_7 77 -#define GPIOY_8 78 -#define GPIOY_9 79 -#define GPIOY_10 80 -#define GPIOY_11 81 -#define GPIOY_12 82 -#define GPIOY_13 83 -#define GPIOY_14 84 -#define GPIOY_15 85 - -#endif /* _DT_BINDINGS_MESON_AXG_GPIO_H */ diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h deleted file mode 100644 index 489c75b276..0000000000 --- a/include/dt-bindings/gpio/meson-gxbb-gpio.h +++ /dev/null @@ -1,148 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * GPIO definitions for Amlogic Meson GXBB SoCs - * - * Copyright (C) 2016 Endless Mobile, Inc. - * Author: Carlo Caione - */ - -#ifndef _DT_BINDINGS_MESON_GXBB_GPIO_H -#define _DT_BINDINGS_MESON_GXBB_GPIO_H - -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIOAO_10 10 -#define GPIOAO_11 11 -#define GPIOAO_12 12 -#define GPIOAO_13 13 -#define GPIO_TEST_N 14 - -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define GPIOZ_11 11 -#define GPIOZ_12 12 -#define GPIOZ_13 13 -#define GPIOZ_14 14 -#define GPIOZ_15 15 -#define GPIOH_0 16 -#define GPIOH_1 17 -#define GPIOH_2 18 -#define GPIOH_3 19 -#define BOOT_0 20 -#define BOOT_1 21 -#define BOOT_2 22 -#define BOOT_3 23 -#define BOOT_4 24 -#define BOOT_5 25 -#define BOOT_6 26 -#define BOOT_7 27 -#define BOOT_8 28 -#define BOOT_9 29 -#define BOOT_10 30 -#define BOOT_11 31 -#define BOOT_12 32 -#define BOOT_13 33 -#define BOOT_14 34 -#define BOOT_15 35 -#define BOOT_16 36 -#define BOOT_17 37 -#define CARD_0 38 -#define CARD_1 39 -#define CARD_2 40 -#define CARD_3 41 -#define CARD_4 42 -#define CARD_5 43 -#define CARD_6 44 -#define GPIODV_0 45 -#define GPIODV_1 46 -#define GPIODV_2 47 -#define GPIODV_3 48 -#define GPIODV_4 49 -#define GPIODV_5 50 -#define GPIODV_6 51 -#define GPIODV_7 52 -#define GPIODV_8 53 -#define GPIODV_9 54 -#define GPIODV_10 55 -#define GPIODV_11 56 -#define GPIODV_12 57 -#define GPIODV_13 58 -#define GPIODV_14 59 -#define GPIODV_15 60 -#define GPIODV_16 61 -#define GPIODV_17 62 -#define GPIODV_18 63 -#define GPIODV_19 64 -#define GPIODV_20 65 -#define GPIODV_21 66 -#define GPIODV_22 67 -#define GPIODV_23 68 -#define GPIODV_24 69 -#define GPIODV_25 70 -#define GPIODV_26 71 -#define GPIODV_27 72 -#define GPIODV_28 73 -#define GPIODV_29 74 -#define GPIOY_0 75 -#define GPIOY_1 76 -#define GPIOY_2 77 -#define GPIOY_3 78 -#define GPIOY_4 79 -#define GPIOY_5 80 -#define GPIOY_6 81 -#define GPIOY_7 82 -#define GPIOY_8 83 -#define GPIOY_9 84 -#define GPIOY_10 85 -#define GPIOY_11 86 -#define GPIOY_12 87 -#define GPIOY_13 88 -#define GPIOY_14 89 -#define GPIOY_15 90 -#define GPIOY_16 91 -#define GPIOX_0 92 -#define GPIOX_1 93 -#define GPIOX_2 94 -#define GPIOX_3 95 -#define GPIOX_4 96 -#define GPIOX_5 97 -#define GPIOX_6 98 -#define GPIOX_7 99 -#define GPIOX_8 100 -#define GPIOX_9 101 -#define GPIOX_10 102 -#define GPIOX_11 103 -#define GPIOX_12 104 -#define GPIOX_13 105 -#define GPIOX_14 106 -#define GPIOX_15 107 -#define GPIOX_16 108 -#define GPIOX_17 109 -#define GPIOX_18 110 -#define GPIOX_19 111 -#define GPIOX_20 112 -#define GPIOX_21 113 -#define GPIOX_22 114 -#define GPIOCLK_0 115 -#define GPIOCLK_1 116 -#define GPIOCLK_2 117 -#define GPIOCLK_3 118 - -#endif diff --git a/include/dt-bindings/gpio/meson-gxl-gpio.h b/include/dt-bindings/gpio/meson-gxl-gpio.h deleted file mode 100644 index 0a001ae482..0000000000 --- a/include/dt-bindings/gpio/meson-gxl-gpio.h +++ /dev/null @@ -1,125 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * GPIO definitions for Amlogic Meson GXL SoCs - * - * Copyright (C) 2016 Endless Mobile, Inc. - * Author: Carlo Caione - */ - -#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H -#define _DT_BINDINGS_MESON_GXL_GPIO_H - -#define GPIOAO_0 0 -#define GPIOAO_1 1 -#define GPIOAO_2 2 -#define GPIOAO_3 3 -#define GPIOAO_4 4 -#define GPIOAO_5 5 -#define GPIOAO_6 6 -#define GPIOAO_7 7 -#define GPIOAO_8 8 -#define GPIOAO_9 9 -#define GPIO_TEST_N 10 - -#define GPIOZ_0 0 -#define GPIOZ_1 1 -#define GPIOZ_2 2 -#define GPIOZ_3 3 -#define GPIOZ_4 4 -#define GPIOZ_5 5 -#define GPIOZ_6 6 -#define GPIOZ_7 7 -#define GPIOZ_8 8 -#define GPIOZ_9 9 -#define GPIOZ_10 10 -#define GPIOZ_11 11 -#define GPIOZ_12 12 -#define GPIOZ_13 13 -#define GPIOZ_14 14 -#define GPIOZ_15 15 -#define GPIOH_0 16 -#define GPIOH_1 17 -#define GPIOH_2 18 -#define GPIOH_3 19 -#define GPIOH_4 20 -#define GPIOH_5 21 -#define GPIOH_6 22 -#define GPIOH_7 23 -#define GPIOH_8 24 -#define GPIOH_9 25 -#define BOOT_0 26 -#define BOOT_1 27 -#define BOOT_2 28 -#define BOOT_3 29 -#define BOOT_4 30 -#define BOOT_5 31 -#define BOOT_6 32 -#define BOOT_7 33 -#define BOOT_8 34 -#define BOOT_9 35 -#define BOOT_10 36 -#define BOOT_11 37 -#define BOOT_12 38 -#define BOOT_13 39 -#define BOOT_14 40 -#define BOOT_15 41 -#define CARD_0 42 -#define CARD_1 43 -#define CARD_2 44 -#define CARD_3 45 -#define CARD_4 46 -#define CARD_5 47 -#define CARD_6 48 -#define GPIODV_0 49 -#define GPIODV_1 50 -#define GPIODV_2 51 -#define GPIODV_3 52 -#define GPIODV_4 53 -#define GPIODV_5 54 -#define GPIODV_6 55 -#define GPIODV_7 56 -#define GPIODV_8 57 -#define GPIODV_9 58 -#define GPIODV_10 59 -#define GPIODV_11 60 -#define GPIODV_12 61 -#define GPIODV_13 62 -#define GPIODV_14 63 -#define GPIODV_15 64 -#define GPIODV_16 65 -#define GPIODV_17 66 -#define GPIODV_18 67 -#define GPIODV_19 68 -#define GPIODV_20 69 -#define GPIODV_21 70 -#define GPIODV_22 71 -#define GPIODV_23 72 -#define GPIODV_24 73 -#define GPIODV_25 74 -#define GPIODV_26 75 -#define GPIODV_27 76 -#define GPIODV_28 77 -#define GPIODV_29 78 -#define GPIOX_0 79 -#define GPIOX_1 80 -#define GPIOX_2 81 -#define GPIOX_3 82 -#define GPIOX_4 83 -#define GPIOX_5 84 -#define GPIOX_6 85 -#define GPIOX_7 86 -#define GPIOX_8 87 -#define GPIOX_9 88 -#define GPIOX_10 89 -#define GPIOX_11 90 -#define GPIOX_12 91 -#define GPIOX_13 92 -#define GPIOX_14 93 -#define GPIOX_15 94 -#define GPIOX_16 95 -#define GPIOX_17 96 -#define GPIOX_18 97 -#define GPIOCLK_0 98 -#define GPIOCLK_1 99 - -#endif diff --git a/include/dt-bindings/power/meson-axg-power.h b/include/dt-bindings/power/meson-axg-power.h deleted file mode 100644 index e5243884b2..0000000000 --- a/include/dt-bindings/power/meson-axg-power.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2020 BayLibre, SAS - * Author: Neil Armstrong - */ - -#ifndef _DT_BINDINGS_MESON_AXG_POWER_H -#define _DT_BINDINGS_MESON_AXG_POWER_H - -#define PWRC_AXG_VPU_ID 0 -#define PWRC_AXG_ETHERNET_MEM_ID 1 -#define PWRC_AXG_AUDIO_ID 2 - -#endif diff --git a/include/dt-bindings/power/meson-gxbb-power.h b/include/dt-bindings/power/meson-gxbb-power.h deleted file mode 100644 index 1262dac696..0000000000 --- a/include/dt-bindings/power/meson-gxbb-power.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */ -/* - * Copyright (c) 2019 BayLibre, SAS - * Author: Neil Armstrong - */ - -#ifndef _DT_BINDINGS_MESON_GXBB_POWER_H -#define _DT_BINDINGS_MESON_GXBB_POWER_H - -#define PWRC_GXBB_VPU_ID 0 -#define PWRC_GXBB_ETHERNET_MEM_ID 1 - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h deleted file mode 100644 index 0f2e0fe45c..0000000000 --- a/include/dt-bindings/reset/amlogic,meson-axg-reset.h +++ /dev/null @@ -1,123 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */ -/* - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong - * - * Copyright (c) 2017 Amlogic, inc. - * Author: Yixun Lan - * - */ - -#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H - -/* RESET0 */ -#define RESET_HIU 0 -#define RESET_PCIE_A 1 -#define RESET_PCIE_B 2 -#define RESET_DDR_TOP 3 -/* 4 */ -#define RESET_VIU 5 -#define RESET_PCIE_PHY 6 -#define RESET_PCIE_APB 7 -/* 8 */ -/* 9 */ -#define RESET_VENC 10 -#define RESET_ASSIST 11 -/* 12 */ -#define RESET_VCBUS 13 -/* 14 */ -/* 15 */ -#define RESET_GIC 16 -#define RESET_CAPB3_DECODE 17 -/* 18-21 */ -#define RESET_SYS_CPU_CAPB3 22 -#define RESET_CBUS_CAPB3 23 -#define RESET_AHB_CNTL 24 -#define RESET_AHB_DATA 25 -#define RESET_VCBUS_CLK81 26 -#define RESET_MMC 27 -/* 28-31 */ -/* RESET1 */ -/* 32 */ -/* 33 */ -#define RESET_USB_OTG 34 -#define RESET_DDR 35 -#define RESET_AO_RESET 36 -/* 37 */ -#define RESET_AHB_SRAM 38 -/* 39 */ -/* 40 */ -#define RESET_DMA 41 -#define RESET_ISA 42 -#define RESET_ETHERNET 43 -/* 44 */ -#define RESET_SD_EMMC_B 45 -#define RESET_SD_EMMC_C 46 -#define RESET_ROM_BOOT 47 -#define RESET_SYS_CPU_0 48 -#define RESET_SYS_CPU_1 49 -#define RESET_SYS_CPU_2 50 -#define RESET_SYS_CPU_3 51 -#define RESET_SYS_CPU_CORE_0 52 -#define RESET_SYS_CPU_CORE_1 53 -#define RESET_SYS_CPU_CORE_2 54 -#define RESET_SYS_CPU_CORE_3 55 -#define RESET_SYS_PLL_DIV 56 -#define RESET_SYS_CPU_AXI 57 -#define RESET_SYS_CPU_L2 58 -#define RESET_SYS_CPU_P 59 -#define RESET_SYS_CPU_MBIST 60 -/* 61-63 */ -/* RESET2 */ -/* 64 */ -/* 65 */ -#define RESET_AUDIO 66 -/* 67 */ -#define RESET_MIPI_HOST 68 -#define RESET_AUDIO_LOCKER 69 -#define RESET_GE2D 70 -/* 71-76 */ -#define RESET_AO_CPU_RESET 77 -/* 78-95 */ -/* RESET3 */ -#define RESET_RING_OSCILLATOR 96 -/* 97-127 */ -/* RESET4 */ -/* 128 */ -/* 129 */ -#define RESET_MIPI_PHY 130 -/* 131-140 */ -#define RESET_VENCL 141 -#define RESET_I2C_MASTER_2 142 -#define RESET_I2C_MASTER_1 143 -/* 144-159 */ -/* RESET5 */ -/* 160-191 */ -/* RESET6 */ -#define RESET_PERIPHS_GENERAL 192 -#define RESET_PERIPHS_SPICC 193 -/* 194 */ -/* 195 */ -#define RESET_PERIPHS_I2C_MASTER_0 196 -/* 197-200 */ -#define RESET_PERIPHS_UART_0 201 -#define RESET_PERIPHS_UART_1 202 -/* 203-204 */ -#define RESET_PERIPHS_SPI_0 205 -#define RESET_PERIPHS_I2C_MASTER_3 206 -/* 207-223 */ -/* RESET7 */ -#define RESET_USB_DDR_0 224 -#define RESET_USB_DDR_1 225 -#define RESET_USB_DDR_2 226 -#define RESET_USB_DDR_3 227 -/* 228 */ -#define RESET_DEVICE_MMC_ARB 229 -/* 230 */ -#define RESET_VID_LOCK 231 -#define RESET_A9_DMC_PIPEL 232 -#define RESET_DMC_VPU_PIPEL 233 -/* 234-255 */ - -#endif diff --git a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h b/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h deleted file mode 100644 index 883bfd3bcb..0000000000 --- a/include/dt-bindings/reset/amlogic,meson-gxbb-reset.h +++ /dev/null @@ -1,161 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ -/* - * Copyright (c) 2016 BayLibre, SAS. - * Author: Neil Armstrong - */ -#ifndef _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H -#define _DT_BINDINGS_AMLOGIC_MESON_GXBB_RESET_H - -/* RESET0 */ -#define RESET_HIU 0 -/* 1 */ -#define RESET_DOS_RESET 2 -#define RESET_DDR_TOP 3 -#define RESET_DCU_RESET 4 -#define RESET_VIU 5 -#define RESET_AIU 6 -#define RESET_VID_PLL_DIV 7 -/* 8 */ -#define RESET_PMUX 9 -#define RESET_VENC 10 -#define RESET_ASSIST 11 -#define RESET_AFIFO2 12 -#define RESET_VCBUS 13 -/* 14 */ -/* 15 */ -#define RESET_GIC 16 -#define RESET_CAPB3_DECODE 17 -#define RESET_NAND_CAPB3 18 -#define RESET_HDMITX_CAPB3 19 -#define RESET_MALI_CAPB3 20 -#define RESET_DOS_CAPB3 21 -#define RESET_SYS_CPU_CAPB3 22 -#define RESET_CBUS_CAPB3 23 -#define RESET_AHB_CNTL 24 -#define RESET_AHB_DATA 25 -#define RESET_VCBUS_CLK81 26 -#define RESET_MMC 27 -#define RESET_MIPI_0 28 -#define RESET_MIPI_1 29 -#define RESET_MIPI_2 30 -#define RESET_MIPI_3 31 -/* RESET1 */ -#define RESET_CPPM 32 -#define RESET_DEMUX 33 -#define RESET_USB_OTG 34 -#define RESET_DDR 35 -#define RESET_AO_RESET 36 -#define RESET_BT656 37 -#define RESET_AHB_SRAM 38 -/* 39 */ -#define RESET_PARSER 40 -#define RESET_BLKMV 41 -#define RESET_ISA 42 -#define RESET_ETHERNET 43 -#define RESET_SD_EMMC_A 44 -#define RESET_SD_EMMC_B 45 -#define RESET_SD_EMMC_C 46 -#define RESET_ROM_BOOT 47 -#define RESET_SYS_CPU_0 48 -#define RESET_SYS_CPU_1 49 -#define RESET_SYS_CPU_2 50 -#define RESET_SYS_CPU_3 51 -#define RESET_SYS_CPU_CORE_0 52 -#define RESET_SYS_CPU_CORE_1 53 -#define RESET_SYS_CPU_CORE_2 54 -#define RESET_SYS_CPU_CORE_3 55 -#define RESET_SYS_PLL_DIV 56 -#define RESET_SYS_CPU_AXI 57 -#define RESET_SYS_CPU_L2 58 -#define RESET_SYS_CPU_P 59 -#define RESET_SYS_CPU_MBIST 60 -#define RESET_ACODEC 61 -/* 62 */ -/* 63 */ -/* RESET2 */ -#define RESET_VD_RMEM 64 -#define RESET_AUDIN 65 -#define RESET_HDMI_TX 66 -/* 67 */ -/* 68 */ -/* 69 */ -#define RESET_GE2D 70 -#define RESET_PARSER_REG 71 -#define RESET_PARSER_FETCH 72 -#define RESET_PARSER_CTL 73 -#define RESET_PARSER_TOP 74 -/* 75 */ -/* 76 */ -#define RESET_AO_CPU_RESET 77 -#define RESET_MALI 78 -#define RESET_HDMI_SYSTEM_RESET 79 -/* 80-95 */ -/* RESET3 */ -#define RESET_RING_OSCILLATOR 96 -#define RESET_SYS_CPU 97 -#define RESET_EFUSE 98 -#define RESET_SYS_CPU_BVCI 99 -#define RESET_AIFIFO 100 -#define RESET_TVFE 101 -#define RESET_AHB_BRIDGE_CNTL 102 -/* 103 */ -#define RESET_AUDIO_DAC 104 -#define RESET_DEMUX_TOP 105 -#define RESET_DEMUX_DES 106 -#define RESET_DEMUX_S2P_0 107 -#define RESET_DEMUX_S2P_1 108 -#define RESET_DEMUX_RESET_0 109 -#define RESET_DEMUX_RESET_1 110 -#define RESET_DEMUX_RESET_2 111 -/* 112-127 */ -/* RESET4 */ -/* 128 */ -/* 129 */ -/* 130 */ -/* 131 */ -#define RESET_DVIN_RESET 132 -#define RESET_RDMA 133 -#define RESET_VENCI 134 -#define RESET_VENCP 135 -/* 136 */ -#define RESET_VDAC 137 -#define RESET_RTC 138 -/* 139 */ -#define RESET_VDI6 140 -#define RESET_VENCL 141 -#define RESET_I2C_MASTER_2 142 -#define RESET_I2C_MASTER_1 143 -/* 144-159 */ -/* RESET5 */ -/* 160-191 */ -/* RESET6 */ -#define RESET_PERIPHS_GENERAL 192 -#define RESET_PERIPHS_SPICC 193 -#define RESET_PERIPHS_SMART_CARD 194 -#define RESET_PERIPHS_SAR_ADC 195 -#define RESET_PERIPHS_I2C_MASTER_0 196 -#define RESET_SANA 197 -/* 198 */ -#define RESET_PERIPHS_STREAM_INTERFACE 199 -#define RESET_PERIPHS_SDIO 200 -#define RESET_PERIPHS_UART_0 201 -#define RESET_PERIPHS_UART_1_2 202 -#define RESET_PERIPHS_ASYNC_0 203 -#define RESET_PERIPHS_ASYNC_1 204 -#define RESET_PERIPHS_SPI_0 205 -#define RESET_PERIPHS_SDHC 206 -#define RESET_UART_SLIP 207 -/* 208-223 */ -/* RESET7 */ -#define RESET_USB_DDR_0 224 -#define RESET_USB_DDR_1 225 -#define RESET_USB_DDR_2 226 -#define RESET_USB_DDR_3 227 -/* 228 */ -#define RESET_DEVICE_MMC_ARB 229 -/* 230 */ -#define RESET_VID_LOCK 231 -#define RESET_A9_DMC_PIPEL 232 -/* 233-255 */ - -#endif diff --git a/include/dt-bindings/sound/meson-aiu.h b/include/dt-bindings/sound/meson-aiu.h deleted file mode 100644 index 1051b8af29..0000000000 --- a/include/dt-bindings/sound/meson-aiu.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __DT_MESON_AIU_H -#define __DT_MESON_AIU_H - -#define AIU_CPU 0 -#define AIU_HDMI 1 -#define AIU_ACODEC 2 - -#define CPU_I2S_FIFO 0 -#define CPU_SPDIF_FIFO 1 -#define CPU_I2S_ENCODER 2 -#define CPU_SPDIF_ENCODER 3 - -#define CTRL_I2S 0 -#define CTRL_PCM 1 -#define CTRL_OUT 2 - -#endif /* __DT_MESON_AIU_H */