diff mbox series

[v2,2/5] usb: dwc3: meson-gxl: switch to generic_phy_set_mode

Message ID 20240620-u-boot-usb-gxl-phy-set-mode-v2-2-b81c027bc02c@linaro.org
State Accepted
Commit 8c58c35048cb47a999c050aad9c6c9785fc5870e
Headers show
Series usb: meson: switch to set_mode callback and other cleanup | expand

Commit Message

Neil Armstrong June 20, 2024, 7:42 a.m. UTC 
Use the PHY set_mode call instead of calling directly in the
PHY shared function.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/usb/dwc3/dwc3-meson-gxl.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

Comments

Marek Vasut June 20, 2024, 11:53 a.m. UTC | #1 
On 6/20/24 9:42 AM, Neil Armstrong wrote:
> Use the PHY set_mode call instead of calling directly in the
> PHY shared function.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>

Reviewed-by: Marek Vasut <marex@denx.de>
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-meson-gxl.c b/drivers/usb/dwc3/dwc3-meson-gxl.c
index 3e693c5ff3..290ac03a37 100644
--- a/drivers/usb/dwc3/dwc3-meson-gxl.c
+++ b/drivers/usb/dwc3/dwc3-meson-gxl.c
@@ -158,9 +158,9 @@  static int dwc3_meson_gxl_usb2_init(struct dwc3_meson_gxl *priv)
 		if (!priv->phys[i].dev)
 			continue;
 
-		phy_meson_gxl_usb2_set_mode(&priv->phys[i],
-				(i == USB2_OTG_PHY) ? USB_DR_MODE_PERIPHERAL
-						    : USB_DR_MODE_HOST);
+		generic_phy_set_mode(&priv->phys[i],
+				(i == USB2_OTG_PHY) ? PHY_MODE_USB_DEVICE
+						    : PHY_MODE_USB_HOST, 0);
 	}
 
 	return 0;
@@ -224,7 +224,9 @@  int dwc3_meson_gxl_force_mode(struct udevice *dev, enum usb_dr_mode mode)
 #endif
 	priv->otg_phy_mode = mode;
 
-	phy_meson_gxl_usb2_set_mode(&priv->phys[USB2_OTG_PHY], mode);
+	generic_phy_set_mode(&priv->phys[USB2_OTG_PHY],
+			     mode == USB_DR_MODE_PERIPHERAL ? PHY_MODE_USB_DEVICE
+							    : PHY_MODE_USB_HOST, 0);
 
 	dwc3_meson_gxl_usb2_set_mode(priv, mode);
 
@@ -361,8 +363,9 @@  static int dwc3_meson_gxl_probe(struct udevice *dev)
 	}
 
 	if (priv->phys[USB2_OTG_PHY].dev)
-		phy_meson_gxl_usb2_set_mode(&priv->phys[USB2_OTG_PHY],
-					    priv->otg_phy_mode);
+		generic_phy_set_mode(&priv->phys[USB2_OTG_PHY],
+			priv->otg_phy_mode == USB_DR_MODE_PERIPHERAL ? PHY_MODE_USB_DEVICE
+								     : PHY_MODE_USB_HOST, 0);
 
 	dwc3_meson_gxl_usb2_set_mode(priv, priv->otg_phy_mode);