From patchwork Tue Sep 10 09:50:13 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 826966 Delivered-To: patch@linaro.org Received: by 2002:adf:ab1c:0:b0:367:895a:4699 with SMTP id q28csp214244wrc; Tue, 10 Sep 2024 02:51:11 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCUJD+HwzqsF0NontDPqkhBbvVUMp1DX21rNJX/n1V+Bd5Edcv9DImjnKJONmsOIGQfu+bBrWw==@linaro.org X-Google-Smtp-Source: AGHT+IG+QnXBfEzeYkJMvNfofZnzCN3A6EjS3TZRgz/+GLTD7O2WsObjR9ks1TIG+M1UGTXSh//x X-Received: by 2002:adf:f751:0:b0:374:ba7b:42af with SMTP id ffacd0b85a97d-378895ddb97mr7246364f8f.26.1725961871691; Tue, 10 Sep 2024 02:51:11 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1725961871; cv=none; d=google.com; s=arc-20240605; b=hwmocpswTKMZop9aKbxjo9BwCzxnKCxIwqTeMbFz7chuq1ToT4Bxc+Z3u1jTiyfCV3 jST0lWtd8fRMHtvJ5PYjSa5RIuZ5cMDOI51ieeuwP1M08LnjKId8cp6HSumYdZAZ1bGZ Ura2D96Ac49J98MUHtrl0etKli/wFW5tfsip2xtI3oI/8LKT4XLt/TynPxhB07G/8cZg UfMcYJqOic0pYpANgG6Zro+uAzDWIUsPaUItsGxWD75nbtTFZGadHpAVNbnIDS8jwioj RlhDcPTd+p6hlndaLr0wli6iPqFqG8EIPJgSlS55xHeFF0Whm5xLiIAORa0RvMBVNcAQ JHzA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20240605; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=EBVr1gp8cWiI8BGGhyadTyRRwJUuq+JLeEerwAG45nk=; fh=uYZl4IFKoPPL7CnejMm7kF2d4ogBOCRzEl3rO7YEPPc=; b=TzXTs50YPfjWXBvG0idwkbWl/ti1IiBM21rYswvJOBOxMOekDtkjbCbGKmtTSv3vaL TKtfTJnOyXgYQU2r6l0feqCyjvDdsASqyTtVQV1Re0FXZaO7JXwUdIfZ058UpGu5jLke DsefIqy0wEK4DezOTPDLC9/FSaiTicrFvHiT3FkhMgipGiBZa6nrSiWXvmrNHUD+5VXS aLKlOsC5+PFKfk/wso+m5i+6Ya4SgQ8EQ1foJiirtC641xTju1DP8tUe7ZKZTuLDKPZX tdaBSd8RqDKZaGnRfKs4UjPeYmiiVH+kSiIcGWKpqS65nFe3jluisOtziwVi/ptDnzRF LLQg==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=dmQOPuX7; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org; dara=neutral header.i=@linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [85.214.62.61]) by mx.google.com with ESMTPS id ffacd0b85a97d-378956d8670si3100578f8f.985.2024.09.10.02.51.11 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 10 Sep 2024 02:51:11 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) client-ip=85.214.62.61; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=dmQOPuX7; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org; dara=neutral header.i=@linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 21EC788FF1; Tue, 10 Sep 2024 11:50:30 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="dmQOPuX7"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id EF50F88FED; Tue, 10 Sep 2024 11:50:28 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id E0EBF88C1B for ; Tue, 10 Sep 2024 11:50:24 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=neil.armstrong@linaro.org Received: by mail-wm1-x32c.google.com with SMTP id 5b1f17b1804b1-42cafda818aso27929495e9.2 for ; Tue, 10 Sep 2024 02:50:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1725961817; x=1726566617; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=EBVr1gp8cWiI8BGGhyadTyRRwJUuq+JLeEerwAG45nk=; b=dmQOPuX7pcHZYK3SQqU7vUMmWO+rgq0JtsG2W+rmGSguMyOyzMGBW6ly64pqyVtaPf gvbr6FCahV/+0vMt2H8FHsgvm4CO4wmf6TnY7MZ3gsfaabmuElRVf4pmvs/J3tXd+JQq NtyzyoLePnSd58nJJ80U0YKap3nZENmUPKuOq9Fm/k6r/ZfKE0nLBFTynn1pY5sUf+5B LwxAZ90pneTLG32d7JoAd+05GqbdwdoARwnDUGnTvfLmWDv3beNLVCIfhTKP3gdSv+Ha l1G+S6D9J+qPdYIqYuZLx5tgpb5+MNUDLnxT89INk87fANxfMQBJfu/HTyKSni5kpQ+z Az2Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1725961817; x=1726566617; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=EBVr1gp8cWiI8BGGhyadTyRRwJUuq+JLeEerwAG45nk=; b=hJIwzkaTrDPpH+h3mitZMRnSVB4L7gq3DKSVlTQMNqJZBETsjsjIMQBYX/Ap7bSQGl 8ax7fGafkWq5AJD21NDWimg/5yS6mAAPnzLiBhz4/t5sJOoWdr2xOxL/e/O9J3oMkA69 boKLBzW98DWumcIlbiR0bNKrbEaGf2kQodxpgjhMwmISP89v/jb/BtkitVC1ko0FZySv bvf3H9Fko+9YYHDK/nbFVFpRHlXcVjnvU/EF0D4CaA4z5V/5OrDSwbKtWj01lLUFagHJ h/ItpTmQZ0XvLkd/B0U6clCZCud0wnwmIZXY+FkZqxDSrk0caMsiLitm9GzAX4FqQxe1 qHIQ== X-Gm-Message-State: AOJu0YzcN8HGEX+ToP2XbuJBoHxYWSmD7kKUveLgkz/dOifiALbh4b+2 jFIBQgh9v0/owEmrRJZZlnWyg+02UpwE3TT7YToKx3E1vRlN6xzY6VXsLlubdd4= X-Received: by 2002:a5d:460c:0:b0:374:c35e:de72 with SMTP id ffacd0b85a97d-378895c53e2mr8346166f8f.2.1725961817191; Tue, 10 Sep 2024 02:50:17 -0700 (PDT) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-378956d3738sm8364030f8f.69.2024.09.10.02.50.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 10 Sep 2024 02:50:16 -0700 (PDT) From: neil.armstrong@linaro.org Date: Tue, 10 Sep 2024 11:50:13 +0200 Subject: [PATCH 4/4] ufs: Add Support for Qualcomm UFS HC driver MIME-Version: 1.0 Message-Id: <20240910-topic-ufs-qcom-controller-v1-4-54c0d2231b10@linaro.org> References: <20240910-topic-ufs-qcom-controller-v1-0-54c0d2231b10@linaro.org> In-Reply-To: <20240910-topic-ufs-qcom-controller-v1-0-54c0d2231b10@linaro.org> To: Bhupesh Sharma , Neha Malcom Francis , Tom Rini , Caleb Connolly , Sumit Garg Cc: u-boot@lists.denx.de, u-boot-qcom@groups.io, Neil Armstrong , Bhupesh Sharma X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=openpgp-sha256; l=24941; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=6X/NL+DXN+dt9OiHnzbIF//F9e4gtOOQ2zQoXk8/mtg=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBm4BZU3rLtyWmPA2bXRnjACp7WNFsl9Kooe81QK4Zs rcolKiGJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZuAWVAAKCRB33NvayMhJ0XpiD/ 9VUODrl9JarD1PwCOvs62T7b1Ps4+EKIoARzmGKkaiirn/uIyoPysjgg+MxWu9QzLx3y1Z39LHdrL1 2h7BfR5+wKwivarF9yKTokbc5aGrBlvQCp1yOIXZ5s+C7zdIVpV70BGzwyW7MMe5CD5F44BxvNaMEf 8v+4+HiGKK2IuPfUNQdn42GYTYcJfgqHSeXls4q9IJnStbUcpLDeMzTQLVITA95Zrwfp4/v2xOBjv5 800AQg8nfHd78YejLxah2m6/0j+UyGCU9l15hLiEQecD9hJGjFzXOIJ78lVmeKr9SffnWBw7na1L+8 3FKRlBgushcPDPleFnObMJM41tMAVwTDKTtrn9ZYIEvueE90UwNWcdarwixvy7tQZIDT1IgNPZ3+FZ j2Nhvx1V8YA3Sx4aJ4/MGg/Jb5Jh0WBD3sXLyWseudnOhG0SnkUopaNzKSFqBQMZOYfLlmndNHFUzS stUGkAXanQ9qSHAMcG2/Pw2eri2j3XB2JeB2r11zDjYTytEimGDnID7PfjnzimuFkJUakGejP+gGAv naNXr3vv3zD1MpcN3P/pCirr5sgjRJsF3aLRfu8AxsGQMkEwC4c5JuR4geYRuBTyOkY3HzzHYygGZH 4sJ4y6Gn4pBi77gMAP7vg49f1F6ATykceygMtJr+j90l8kHQbOPEzTJj7j+Q== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean From: Bhupesh Sharma Add Support for the Host Controller driver for UFS HC present on Qualcomm Snapdragon SoCs. It has been successfully tested on SDM845, SM8250, SM8550 ant SM8650 SoCs. Signed-off-by: Bhupesh Sharma Signed-off-by: Neil Armstrong --- drivers/ufs/Kconfig | 7 + drivers/ufs/Makefile | 1 + drivers/ufs/ufs-qcom.c | 670 +++++++++++++++++++++++++++++++++++++++++++++++++ drivers/ufs/ufs-qcom.h | 147 +++++++++++ drivers/ufs/unipro.h | 6 + 5 files changed, 831 insertions(+) diff --git a/drivers/ufs/Kconfig b/drivers/ufs/Kconfig index 7da46faed6b..0ca1f2ae7dc 100644 --- a/drivers/ufs/Kconfig +++ b/drivers/ufs/Kconfig @@ -26,6 +26,13 @@ config UFS_PCI If unsure, say N. +config QCOM_UFS + bool "Qualcomm Host Controller driver for UFS" + depends on UFS && ARCH_SNAPDRAGON + help + This selects the platform driver for the UFS host + controller present on Qualcomm Snapdragon SoCs. + config TI_J721E_UFS bool "Glue Layer driver for UFS on TI J721E devices" help diff --git a/drivers/ufs/Makefile b/drivers/ufs/Makefile index 67c42621aba..024382cd2ce 100644 --- a/drivers/ufs/Makefile +++ b/drivers/ufs/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_UFS) += ufs.o ufs-uclass.o obj-$(CONFIG_CADENCE_UFS) += cdns-platform.o +obj-$(CONFIG_QCOM_UFS) += ufs-qcom.o obj-$(CONFIG_TI_J721E_UFS) += ti-j721e-ufs.o obj-$(CONFIG_UFS_PCI) += ufs-pci.o obj-$(CONFIG_UFS_RENESAS) += ufs-renesas.o diff --git a/drivers/ufs/ufs-qcom.c b/drivers/ufs/ufs-qcom.c new file mode 100644 index 00000000000..843585726c7 --- /dev/null +++ b/drivers/ufs/ufs-qcom.c @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. + * Copyright (C) 2023-2024 Linaro Limited + * Authors: + * - Bhupesh Sharma + * - Neil Armstrong + * + * Based on Linux driver + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "ufs.h" +#include "ufs-qcom.h" + +#define ceil(freq, div) ((freq) % (div) == 0 ? ((freq) / (div)) : ((freq) / (div) + 1)) + +static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_hba *hba, bool enable); + +static int ufs_qcom_enable_clks(struct ufs_qcom_priv *priv) +{ + int err; + + if (priv->is_clks_enabled) + return 0; + + err = clk_enable_bulk(&priv->clks); + if (err) + return err; + + priv->is_clks_enabled = true; + + return 0; +} + +static int ufs_qcom_init_clks(struct ufs_qcom_priv *priv) +{ + int err; + struct udevice *dev = priv->hba->dev; + + err = clk_get_bulk(dev, &priv->clks); + if (err) + return err; + + return 0; +} + +static int ufs_qcom_check_hibern8(struct ufs_hba *hba) +{ + int err, retry_count = 50; + u32 tx_fsm_val = 0; + + do { + err = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &tx_fsm_val); + if (err || tx_fsm_val == TX_FSM_HIBERN8) + break; + + /* max. 200us */ + udelay(200); + retry_count--; + } while (retry_count != 0); + + /* Check the state again */ + err = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &tx_fsm_val); + + if (err) { + dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", + __func__, err); + } else if (tx_fsm_val != TX_FSM_HIBERN8) { + err = tx_fsm_val; + dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", + __func__, err); + } + + return err; +} + +static void ufs_qcom_select_unipro_mode(struct ufs_qcom_priv *priv) +{ + ufshcd_rmwl(priv->hba, QUNIPRO_SEL, QUNIPRO_SEL, REG_UFS_CFG1); + + if (priv->hw_ver.major >= 0x05) + ufshcd_rmwl(priv->hba, QUNIPRO_G4_SEL, 0, REG_UFS_CFG0); +} + +/* + * ufs_qcom_reset - reset host controller and PHY + */ +static int ufs_qcom_reset(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + int ret; + + ret = reset_assert(&priv->core_reset); + if (ret) { + dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", + __func__, ret); + return ret; + } + + /* + * The hardware requirement for delay between assert/deassert + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to + * ~125us (4/32768). To be on the safe side add 200us delay. + */ + udelay(210); + + ret = reset_deassert(&priv->core_reset); + if (ret) + dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", + __func__, ret); + + udelay(1100); + + return 0; +} + +/** + * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks + * @hba: host controller instance + * + * QCOM UFS host controller might have some non standard behaviours (quirks) + * than what is specified by UFSHCI specification. Advertise all such + * quirks to standard UFS host controller driver so standard takes them into + * account. + */ +static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + if (priv->hw_ver.major == 0x2) + hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; + + if (priv->hw_ver.major > 0x3) + hba->quirks |= UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH; +} + +/** + * ufs_qcom_setup_clocks - enables/disable clocks + * @hba: host controller instance + * @on: If true, enable clocks else disable them. + * @status: PRE_CHANGE or POST_CHANGE notify + * + * Returns 0 on success, non-zero on failure. + */ +static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, + enum ufs_notify_change_status status) +{ + switch (status) { + case PRE_CHANGE: + if (!on) + /* disable device ref_clk */ + ufs_qcom_dev_ref_clk_ctrl(hba, false); + break; + case POST_CHANGE: + if (on) + /* enable the device ref clock for HS mode*/ + ufs_qcom_dev_ref_clk_ctrl(hba, true); + break; + } + + return 0; +} + +static u32 ufs_qcom_get_hs_gear(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + /* + * TOFIX: v4 controllers *should* be able to support HS Gear 4 + * but so far pwr_mode switch is failing on v4 controllers and HS Gear 4. + * only enable HS Gear > 3 for Controlers major version 5 and later. + */ + if (priv->hw_ver.major > 0x4) + return UFS_QCOM_MAX_GEAR(ufshcd_readl(hba, REG_UFS_PARAM0)); + + /* Default is HS-G3 */ + return UFS_HS_G3; +} + +static int ufs_get_max_pwr_mode(struct ufs_hba *hba, + struct ufs_pwr_mode_info *max_pwr_info) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + u32 max_gear = ufs_qcom_get_hs_gear(hba); + + max_pwr_info->info.gear_rx = min(max_pwr_info->info.gear_rx, max_gear); + /* Qualcomm UFS only support symmetric Gear */ + max_pwr_info->info.gear_tx = max_pwr_info->info.gear_rx; + + if (priv->hw_ver.major >= 0x4 && max_pwr_info->info.gear_rx > UFS_HS_G3) + ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_TXHSADAPTTYPE), + PA_INITIAL_ADAPT); + + dev_info(hba->dev, "Max HS Gear: %d\n", max_pwr_info->info.gear_rx); + + return 0; +} + +static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + struct phy phy; + int ret; + + /* Reset UFS Host Controller and PHY */ + ret = ufs_qcom_reset(hba); + if (ret) + dev_warn(hba->dev, "%s: host reset returned %d\n", + __func__, ret); + + /* get phy */ + ret = generic_phy_get_by_name(hba->dev, "ufsphy", &phy); + if (ret) { + dev_warn(hba->dev, "%s: Unable to get QMP ufs phy, ret = %d\n", + __func__, ret); + return ret; + } + + /* phy initialization */ + ret = generic_phy_init(&phy); + if (ret) { + dev_err(hba->dev, "%s: phy init failed, ret = %d\n", + __func__, ret); + return ret; + } + + /* power on phy */ + ret = generic_phy_power_on(&phy); + if (ret) { + dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", + __func__, ret); + goto out_disable_phy; + } + + ufs_qcom_select_unipro_mode(priv); + + return 0; + +out_disable_phy: + generic_phy_exit(&phy); + + return ret; +} + +/* + * The UTP controller has a number of internal clock gating cells (CGCs). + * Internal hardware sub-modules within the UTP controller control the CGCs. + * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved + * in a specific operation, UTP controller CGCs are by default disabled and + * this function enables them (after every UFS link startup) to save some power + * leakage. + */ +static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) +{ + ufshcd_rmwl(hba, REG_UFS_CFG2_CGC_EN_ALL, REG_UFS_CFG2_CGC_EN_ALL, + REG_UFS_CFG2); + + /* Ensure that HW clock gating is enabled before next operations */ + ufshcd_readl(hba, REG_UFS_CFG2); +} + +static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + int err; + + switch (status) { + case PRE_CHANGE: + ufs_qcom_power_up_sequence(hba); + /* + * The PHY PLL output is the source of tx/rx lane symbol + * clocks, hence, enable the lane clocks only after PHY + * is initialized. + */ + err = ufs_qcom_enable_clks(priv); + break; + case POST_CHANGE: + /* check if UFS PHY moved from DISABLED to HIBERN8 */ + err = ufs_qcom_check_hibern8(hba); + ufs_qcom_enable_hw_clk_gating(hba); + break; + default: + dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); + err = -EINVAL; + break; + } + + return err; +} + +/* Look for the maximum core_clk_unipro clock value */ +static u32 ufs_qcom_get_core_clk_unipro_max_freq(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + ofnode node = dev_ofnode(priv->hba->dev); + struct ofnode_phandle_args opp_table; + int pos, ret; + u32 clk = 0; + + /* Get core_clk_unipro clock index */ + pos = ofnode_stringlist_search(node, "clock-names", "core_clk_unipro"); + if (pos < 0) + goto fallback; + + /* Try parsing the opps */ + if (!ofnode_parse_phandle_with_args(node, "required-opps", + NULL, 0, 0, &opp_table) && + ofnode_device_is_compatible(opp_table.node, "operating-points-v2")) { + ofnode opp_node; + + ofnode_for_each_subnode(opp_node, opp_table.node) { + u64 opp_clk; + /* opp-hw contains the OPP frequency */ + ret = ofnode_read_u64_index(opp_node, "opp-hz", pos, &opp_clk); + if (ret) + continue; + + /* We don't handle larger clock values, ignore */ + if (opp_clk > U32_MAX) + continue; + + /* Only keep the largest value */ + if (opp_clk > clk) + clk = opp_clk; + } + + /* If we get a valid clock, return it or check legacy*/ + if (clk) + return clk; + } + + /* Legacy freq-table-hz has a pair of u32 per clocks entry, min then max */ + if (!ofnode_read_u32_index(node, "freq-table-hz", pos * 2 + 1, &clk) && + clk > 0) + return clk; + +fallback: + /* default for backwards compatibility */ + return UNIPRO_CORE_CLK_FREQ_150_MHZ * 1000 * 1000; +}; + +static int ufs_qcom_set_clk_40ns_cycles(struct ufs_hba *hba, + u32 cycles_in_1us) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + u32 cycles_in_40ns; + int err; + u32 reg; + + /* + * UFS host controller V4.0.0 onwards needs to program + * PA_VS_CORE_CLK_40NS_CYCLES attribute per programmed + * frequency of unipro core clk of UFS host controller. + */ + if (priv->hw_ver.major < 4) + return 0; + + /* + * Generic formulae for cycles_in_40ns = (freq_unipro/25) is not + * applicable for all frequencies. For ex: ceil(37.5 MHz/25) will + * be 2 and ceil(403 MHZ/25) will be 17 whereas Hardware + * specification expect to be 16. Hence use exact hardware spec + * mandated value for cycles_in_40ns instead of calculating using + * generic formulae. + */ + switch (cycles_in_1us) { + case UNIPRO_CORE_CLK_FREQ_403_MHZ: + cycles_in_40ns = 16; + break; + case UNIPRO_CORE_CLK_FREQ_300_MHZ: + cycles_in_40ns = 12; + break; + case UNIPRO_CORE_CLK_FREQ_201_5_MHZ: + cycles_in_40ns = 8; + break; + case UNIPRO_CORE_CLK_FREQ_150_MHZ: + cycles_in_40ns = 6; + break; + case UNIPRO_CORE_CLK_FREQ_100_MHZ: + cycles_in_40ns = 4; + break; + case UNIPRO_CORE_CLK_FREQ_75_MHZ: + cycles_in_40ns = 3; + break; + case UNIPRO_CORE_CLK_FREQ_37_5_MHZ: + cycles_in_40ns = 2; + break; + default: + dev_err(hba->dev, "UNIPRO clk freq %u MHz not supported\n", + cycles_in_1us); + return -EINVAL; + } + + err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), ®); + if (err) + return err; + + reg &= ~PA_VS_CORE_CLK_40NS_CYCLES_MASK; + reg |= cycles_in_40ns; + + return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CORE_CLK_40NS_CYCLES), reg); +} + +static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + u32 core_clk_ctrl_reg; + u32 cycles_in_1us; + int err; + + cycles_in_1us = ceil(ufs_qcom_get_core_clk_unipro_max_freq(hba), + (1000 * 1000)); + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + &core_clk_ctrl_reg); + if (err) + return err; + + /* Bit mask is different for UFS host controller V4.0.0 onwards */ + if (priv->hw_ver.major >= 4) { + core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK_V4; + core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK_V4, cycles_in_1us); + } else { + core_clk_ctrl_reg &= ~CLK_1US_CYCLES_MASK; + core_clk_ctrl_reg |= FIELD_PREP(CLK_1US_CYCLES_MASK, cycles_in_1us); + } + + /* Clear CORE_CLK_DIV_EN */ + core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; + + err = ufshcd_dme_set(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + core_clk_ctrl_reg); + if (err) + return err; + + /* Configure unipro core clk 40ns attribute */ + return ufs_qcom_set_clk_40ns_cycles(hba, cycles_in_1us); +} + +static u32 ufs_qcom_get_local_unipro_ver(struct ufs_hba *hba) +{ + /* HCI version 1.0 and 1.1 supports UniPro 1.41 */ + switch (hba->version) { + case UFSHCI_VERSION_10: + case UFSHCI_VERSION_11: + return UFS_UNIPRO_VER_1_41; + + case UFSHCI_VERSION_20: + case UFSHCI_VERSION_21: + default: + return UFS_UNIPRO_VER_1_6; + } +} + +static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + int err = 0; + + switch (status) { + case PRE_CHANGE: + err = ufs_qcom_set_core_clk_ctrl(hba); + if (err) + dev_err(hba->dev, "cfg core clk ctrl failed\n"); + /* + * Some UFS devices (and may be host) have issues if LCC is + * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 + * before link startup which will make sure that both host + * and device TX LCC are disabled once link startup is + * completed. + */ + if (ufs_qcom_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) + err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0); + + break; + default: + break; + } + + return err; +} + +static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_hba *hba, bool enable) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + if (enable ^ priv->is_dev_ref_clk_enabled) { + u32 temp = readl_relaxed(hba->mmio_base + REG_UFS_CFG1); + + if (enable) + temp |= BIT(26); + else + temp &= ~BIT(26); + + /* + * If we are here to disable this clock it might be immediately + * after entering into hibern8 in which case we need to make + * sure that device ref_clk is active for specific time after + * hibern8 enter. + */ + if (!enable) + udelay(10); + + writel_relaxed(temp, hba->mmio_base + REG_UFS_CFG1); + + /* + * Make sure the write to ref_clk reaches the destination and + * not stored in a Write Buffer (WB). + */ + readl(hba->mmio_base + REG_UFS_CFG1); + + /* + * If we call hibern8 exit after this, we need to make sure that + * device ref_clk is stable for at least 1us before the hibern8 + * exit command. + */ + if (enable) + udelay(1); + + priv->is_dev_ref_clk_enabled = enable; + } +} + +/** + * ufs_qcom_init - bind phy with controller + * @hba: host controller instance + * + * Powers up PHY enabling clocks and regulators. + * + * Returns -EPROBE_DEFER if binding fails, returns negative error + * on phy power up failure and returns zero on success. + */ +static int ufs_qcom_init(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + int err; + + priv->hba = hba; + + /* setup clocks */ + ufs_qcom_setup_clocks(hba, true, PRE_CHANGE); + + if (priv->hw_ver.major >= 0x4) + ufshcd_dme_set(hba, + UIC_ARG_MIB(PA_TXHSADAPTTYPE), + PA_NO_ADAPT); + + ufs_qcom_setup_clocks(hba, true, POST_CHANGE); + + ufs_qcom_get_controller_revision(hba, &priv->hw_ver.major, + &priv->hw_ver.minor, + &priv->hw_ver.step); + dev_info(hba->dev, "Qcom UFS HC version: %d.%d.%d\n", + priv->hw_ver.major, + priv->hw_ver.minor, + priv->hw_ver.step); + + err = ufs_qcom_init_clks(priv); + if (err) { + dev_err(hba->dev, "failed to initialize clocks, err:%d\n", err); + return err; + } + + ufs_qcom_advertise_quirks(hba); + ufs_qcom_setup_clocks(hba, true, POST_CHANGE); + + return 0; +} + +/** + * ufs_qcom_device_reset() - toggle the (optional) device reset line + * @hba: per-adapter instance + * + * Toggles the (optional) reset line to reset the attached device. + */ +static int ufs_qcom_device_reset(struct ufs_hba *hba) +{ + struct ufs_qcom_priv *priv = dev_get_priv(hba->dev); + + if (!dm_gpio_is_valid(&priv->reset)) + return 0; + + /* + * The UFS device shall detect reset pulses of 1us, sleep for 10us to + * be on the safe side. + */ + dm_gpio_set_value(&priv->reset, true); + udelay(10); + + dm_gpio_set_value(&priv->reset, false); + udelay(10); + + return 0; +} + +static struct ufs_hba_ops ufs_qcom_hba_ops = { + .init = ufs_qcom_init, + .get_max_pwr_mode = ufs_get_max_pwr_mode, + .hce_enable_notify = ufs_qcom_hce_enable_notify, + .link_startup_notify = ufs_qcom_link_startup_notify, + .device_reset = ufs_qcom_device_reset, +}; + +static int ufs_qcom_probe(struct udevice *dev) +{ + struct ufs_qcom_priv *priv = dev_get_priv(dev); + int ret; + + /* get resets */ + ret = reset_get_by_name(dev, "rst", &priv->core_reset); + if (ret) { + dev_err(dev, "failed to get reset, ret:%d\n", ret); + return ret; + } + + ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset, GPIOD_IS_OUT); + if (ret) { + dev_err(dev, "Warning: cannot get reset GPIO\n"); + } + + ret = ufshcd_probe(dev, &ufs_qcom_hba_ops); + if (ret) { + dev_err(dev, "ufshcd_probe() failed, ret:%d\n", ret); + return ret; + } + + return 0; +} + +static int ufs_qcom_bind(struct udevice *dev) +{ + struct udevice *scsi_dev; + + return ufs_scsi_bind(dev, &scsi_dev); +} + +static const struct udevice_id ufs_qcom_ids[] = { + { .compatible = "qcom,ufshc" }, + {}, +}; + +U_BOOT_DRIVER(qcom_ufshcd) = { + .name = "qcom-ufshcd", + .id = UCLASS_UFS, + .of_match = ufs_qcom_ids, + .probe = ufs_qcom_probe, + .bind = ufs_qcom_bind, + .priv_auto = sizeof(struct ufs_qcom_priv), +}; diff --git a/drivers/ufs/ufs-qcom.h b/drivers/ufs/ufs-qcom.h new file mode 100644 index 00000000000..de957ae60f3 --- /dev/null +++ b/drivers/ufs/ufs-qcom.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + */ + +#ifndef UFS_QCOM_H_ +#define UFS_QCOM_H_ + +#include +#include + +#define MPHY_TX_FSM_STATE 0x41 +#define TX_FSM_HIBERN8 0x1 +#define DEFAULT_CLK_RATE_HZ 1000000 + +#define UFS_HW_VER_MAJOR_MASK GENMASK(31, 28) +#define UFS_HW_VER_MINOR_MASK GENMASK(27, 16) +#define UFS_HW_VER_STEP_MASK GENMASK(15, 0) + +/* QCOM UFS host controller vendor specific registers */ +enum { + REG_UFS_SYS1CLK_1US = 0xC0, + REG_UFS_TX_SYMBOL_CLK_NS_US = 0xC4, + REG_UFS_LOCAL_PORT_ID_REG = 0xC8, + REG_UFS_PA_ERR_CODE = 0xCC, + /* On older UFS revisions, this register is called "RETRY_TIMER_REG" */ + REG_UFS_PARAM0 = 0xD0, + /* On older UFS revisions, this register is called "REG_UFS_PA_LINK_STARTUP_TIMER" */ + REG_UFS_CFG0 = 0xD8, + REG_UFS_CFG1 = 0xDC, + REG_UFS_CFG2 = 0xE0, + REG_UFS_HW_VERSION = 0xE4, + + UFS_TEST_BUS = 0xE8, + UFS_TEST_BUS_CTRL_0 = 0xEC, + UFS_TEST_BUS_CTRL_1 = 0xF0, + UFS_TEST_BUS_CTRL_2 = 0xF4, + UFS_UNIPRO_CFG = 0xF8, + + /* + * QCOM UFS host controller vendor specific registers + * added in HW Version 3.0.0 + */ + UFS_AH8_CFG = 0xFC, + + REG_UFS_CFG3 = 0x271C, +}; + +/* bit definitions for REG_UFS_CFG0 register */ +#define QUNIPRO_G4_SEL BIT(5) + +/* bit definitions for REG_UFS_CFG1 register */ +#define QUNIPRO_SEL BIT(0) +#define UFS_PHY_SOFT_RESET BIT(1) +#define UTP_DBG_RAMS_EN BIT(17) +#define TEST_BUS_EN BIT(18) +#define TEST_BUS_SEL GENMASK(22, 19) +#define UFS_REG_TEST_BUS_EN BIT(30) + +#define UFS_PHY_RESET_ENABLE 1 +#define UFS_PHY_RESET_DISABLE 0 + +/* bit definitions for REG_UFS_CFG2 register */ +#define UAWM_HW_CGC_EN BIT(0) +#define UARM_HW_CGC_EN BIT(1) +#define TXUC_HW_CGC_EN BIT(2) +#define RXUC_HW_CGC_EN BIT(3) +#define DFC_HW_CGC_EN BIT(4) +#define TRLUT_HW_CGC_EN BIT(5) +#define TMRLUT_HW_CGC_EN BIT(6) +#define OCSC_HW_CGC_EN BIT(7) + +/* bit definitions for REG_UFS_PARAM0 */ +#define MAX_HS_GEAR_MASK GENMASK(6, 4) +#define UFS_QCOM_MAX_GEAR(x) FIELD_GET(MAX_HS_GEAR_MASK, (x)) + +/* bit definition for UFS_UFS_TEST_BUS_CTRL_n */ +#define TEST_BUS_SUB_SEL_MASK GENMASK(4, 0) /* All XXX_SEL fields are 5 bits wide */ + +#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\ + TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\ + DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\ + TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN) + +/* bit offset */ +#define OFFSET_CLK_NS_REG 0xa + +/* bit masks */ +#define MASK_TX_SYMBOL_CLK_1US_REG GENMASK(9, 0) +#define MASK_CLK_NS_REG GENMASK(23, 10) + +/* QUniPro Vendor specific attributes */ +#define PA_VS_CONFIG_REG1 0x9000 +#define DME_VS_CORE_CLK_CTRL 0xD002 +/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */ +#define CLK_1US_CYCLES_MASK_V4 GENMASK(27, 16) +#define CLK_1US_CYCLES_MASK GENMASK(7, 0) +#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8) +#define PA_VS_CORE_CLK_40NS_CYCLES 0x9007 +#define PA_VS_CORE_CLK_40NS_CYCLES_MASK GENMASK(6, 0) + +/* QCOM UFS host controller core clk frequencies */ +#define UNIPRO_CORE_CLK_FREQ_37_5_MHZ 38 +#define UNIPRO_CORE_CLK_FREQ_75_MHZ 75 +#define UNIPRO_CORE_CLK_FREQ_100_MHZ 100 +#define UNIPRO_CORE_CLK_FREQ_150_MHZ 150 +#define UNIPRO_CORE_CLK_FREQ_300_MHZ 300 +#define UNIPRO_CORE_CLK_FREQ_201_5_MHZ 202 +#define UNIPRO_CORE_CLK_FREQ_403_MHZ 403 + +static inline void +ufs_qcom_get_controller_revision(struct ufs_hba *hba, + u8 *major, u16 *minor, u16 *step) +{ + u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION); + + *major = FIELD_GET(UFS_HW_VER_MAJOR_MASK, ver); + *minor = FIELD_GET(UFS_HW_VER_MINOR_MASK, ver); + *step = FIELD_GET(UFS_HW_VER_STEP_MASK, ver); +}; + +/* Host controller hardware version: major.minor.step */ +struct ufs_hw_version { + u16 step; + u16 minor; + u8 major; +}; + +struct gpio_desc; + +struct ufs_qcom_priv { + struct phy *generic_phy; + struct ufs_hba *hba; + + struct clk_bulk clks; + bool is_clks_enabled; + + struct ufs_hw_version hw_ver; + + /* Reset control of HCI */ + struct reset_ctl core_reset; + + struct gpio_desc reset; + + bool is_dev_ref_clk_enabled; +}; + +#endif /* UFS_QCOM_H_ */ diff --git a/drivers/ufs/unipro.h b/drivers/ufs/unipro.h index b30b17fa5ad..52db6324b4a 100644 --- a/drivers/ufs/unipro.h +++ b/drivers/ufs/unipro.h @@ -140,6 +140,12 @@ #define PA_SLEEPNOCONFIGTIME 0x15A2 #define PA_STALLNOCONFIGTIME 0x15A3 #define PA_SAVECONFIGTIME 0x15A4 +#define PA_TXHSADAPTTYPE 0x15D4 + +/* Adapt type for PA_TXHSADAPTTYPE attribute */ +#define PA_REFRESH_ADAPT 0x00 +#define PA_INITIAL_ADAPT 0x01 +#define PA_NO_ADAPT 0x03 #define PA_TACTIVATE_TIME_UNIT_US 10 #define PA_HIBERN8_TIME_UNIT_US 100