diff mbox series

[3/7] mmc: zynq_sdhci: Move macro to the top

Message ID 489334342da8b1b8e39048d8d800aefd2ff1c459.1590144247.git.michal.simek@xilinx.com
State Accepted
Commit 9851f50d3d8e8a933a072b11f7f497846b068fb8
Headers show
Series mmc: zynqmp_sdhci: Add support for Tap delay | expand

Commit Message

Michal Simek May 22, 2020, 10:44 a.m. UTC 
Just group macros below headers. Other patches will be using this location
too.

Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/mmc/zynq_sdhci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 02583f76f936..1c83aab84021 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -19,6 +19,8 @@ 
 #include <sdhci.h>
 #include <zynqmp_tap_delay.h>
 
+#define SDHCI_TUNING_LOOP_COUNT		40
+
 struct arasan_sdhci_plat {
 	struct mmc_config cfg;
 	struct mmc mmc;
@@ -46,8 +48,6 @@  static const u8 mode2timing[] = {
 	[MMC_HS_200] = MMC_TIMING_MMC_HS200,
 };
 
-#define SDHCI_TUNING_LOOP_COUNT	40
-
 static void arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid)
 {
 	u16 clk;