diff --git a/arch/riscv/dts/Makefile b/arch/riscv/dts/Makefile
index 4f30e6936f..3a6f96c67d 100644
--- a/arch/riscv/dts/Makefile
+++ b/arch/riscv/dts/Makefile
@@ -2,6 +2,7 @@
 
 dtb-$(CONFIG_TARGET_AX25_AE350) += ae350_32.dtb ae350_64.dtb
 dtb-$(CONFIG_TARGET_SIFIVE_FU540) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_TARGET_SIPEED_MAIX) += k210-maix-bit.dtb
 
 targets += $(dtb-y)
 
diff --git a/arch/riscv/dts/k210-maix-bit.dts b/arch/riscv/dts/k210-maix-bit.dts
new file mode 100644
index 0000000000..a25aa34ff8
--- /dev/null
+++ b/arch/riscv/dts/k210-maix-bit.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2 at gmail.com>
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+/ {
+	model = "Sipeed Maix Bit";
+	compatible = "sipeed,maix-bit", "kendryte,k210";
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 debug loglevel=7";
+		stdout-path = "serial0";
+	};
+};
+
+&uarths0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	slot at 0 {
+		compatible = "mmc-spi-slot";
+		reg = <0>;
+		broken-cd;
+		disable-wp;
+	};
+};
+
+&spi3 {
+	status = "okay";
+	spi-flash at 0 {
+		compatible = "gd25lq64c", "gd25q64", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <120000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/riscv/dts/k210.dtsi b/arch/riscv/dts/k210.dtsi
new file mode 100644
index 0000000000..1408d9b4a9
--- /dev/null
+++ b/arch/riscv/dts/k210.dtsi
@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#include <dt-bindings/clock/k210-sysctl.h>
+#include <dt-bindings/reset/k210-sysctl.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "kendryte,k210";
+
+	aliases {
+		serial0 = &uarths0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "riscv";
+			riscv,isa = "rv64acdfim";
+			mmu-type = "riscv,sv32";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>; /* bogus */
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>; /* bogus */
+			clocks = <&sysclk K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			reg = <1>;
+			compatible = "riscv";
+			riscv,isa = "rv64acdfim";
+			mmu-type = "riscv,sv32";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>; /* bogus */
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>; /* bogus */
+			clocks = <&sysclk K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram0: memory at 80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x400000>;
+		clocks = <&sysclk K210_CLK_SRAM0>;
+	};
+
+	sram1: memory at 80400000 {
+		device_type = "memory";
+		reg = <0x80400000 0x400000>;
+		clocks = <&sysclk K210_CLK_SRAM1>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ai_reserved: ai at 80600000 {
+			reg = <0x80600000 0x200000>;
+			reusable;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "kendryte,k210-soc", "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		clint0: interrupt-controller at 2000000 {
+			compatible = "riscv,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>,  <&cpu1_intc 3>;
+			clocks = <&sysclk K210_CLK_CPU>;
+		};
+
+		plic0: interrupt-controller at c000000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "riscv,plic1";
+			reg = <0xC000000 0x03FFF008>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+			                      <&cpu1_intc 11>, <&cpu1_intc 9>;
+			riscv,ndev = <65>;
+		};
+
+		uarths0: serial at 38000000 {
+			compatible = "sifive,uart0";
+			reg = <0x38000000 0x20>;
+			interrupts = <33>;
+			clocks = <&sysclk K210_CLK_CPU>;
+			status = "disabled";
+		};
+
+		gpio0: gpio-controller at 38001000 {
+			#gpio-cells = <2>;
+			compatible = "none";
+			reg = <0x38001000 0x44>;
+			gpio-controller;
+			interrupts = <34 35 36 37 38 39 40 41
+			              42 43 44 45 46 47 48 49
+			              50 51 52 53 54 55 56 57
+				      58 59 60 61 62 63 64 65>;
+			clocks = <&sysclk K210_CLK_CPU>;
+			status = "disabled";
+		};
+
+		kpu0: kpu at 40600000 {
+			compatible = "none";
+			reg = <0x40800000 0x48>;
+			interrupts = <25>;
+			clocks = <&sysclk K210_CLK_AI>;
+			memory-region = <&ai_reserved>;
+			status = "disabled";
+		};
+
+		fft0: fft at 42000000 {
+			compatible = "none";
+			reg = <0x42000000 0x400000>;
+			interrupts = <26>;
+			clocks = <&sysclk K210_CLK_FFT>;
+			resets = <&sysrst K210_RST_FFT>;
+			status = "disabled";
+		};
+
+		dmac0: dma-controller at 50000000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x50000000 0xD00>;
+			interrupts = <27 28 29 30 31 32>;
+			clocks = <&sysclk K210_CLK_DMA>, <&sysclk K210_CLK_DMA>;
+			clock-names = "core-clk", "cfgr-clk";
+			resets = <&sysrst K210_RST_DMA>;
+			dma-channels = <6>;
+			snps,dma-masters = <2>;
+			snps,data-width = <5>;
+			snps,block-size = <0x400000 0x400000 0x400000
+			                   0x400000 0x400000 0x400000>;
+			snps,axi-max-burst-len = <256>;
+			status = "disabled";
+		};
+
+		gpio1: gpio-controller at 50200000 {
+			#gpio-cells = <2>;
+			compatible = "none";
+			reg = <0x50200000 0x6C>;
+			gpio-controller;
+			interrupts = <23>;
+			clocks = <&sysclk K210_CLK_GPIO>;
+			resets = <&sysrst K210_RST_GPIO>;
+			status = "disabled";
+		};
+
+		uart1: serial at 50210000 {
+			compatible = "ns16550";
+			reg = <50210000 0xc4>;
+			interrupts = <11>;
+			clocks = <&sysclk K210_CLK_UART1>;
+			resets = <&sysrst K210_RST_UART1>;
+			fifo-size = <8>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		uart2: serial at 50220000 {
+			compatible = "ns16550";
+			reg = <50220000 0xc4>;
+			interrupts = <12>;
+			clocks = <&sysclk K210_CLK_UART2>;
+			resets = <&sysrst K210_RST_UART2>;
+			fifo-size = <8>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		uart3: serial at 50230000 {
+			compatible = "ns16550";
+			reg = <50230000 0xc4>;
+			interrupts = <13>;
+			clocks = <&sysclk K210_CLK_UART3>;
+			resets = <&sysrst K210_RST_UART3>;
+			fifo-size = <8>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		spi2: spi at 50240000 {
+			compatible = "snps,dw-apb-ssi";
+			spi-slave;
+			reg = <0x50240000 0x120>;
+			interrupts = <2>;
+			clocks = <&sysclk K210_CLK_SPI2>;
+			resets = <&sysrst K210_RST_SPI2>;
+			status = "disabled";
+		};
+
+		i2s0: i2s at 50250000 {
+			compatible = "snps.designware-i2s";
+			reg = <0x50250000 0x200>;
+			interrupts = <5>;
+			clocks = <&sysclk K210_CLK_I2S0>;
+			resets = <&sysrst K210_RST_I2S0>;
+			status = "disabled";
+		};
+
+		apu0: sound at 520250200 {
+			compatible = "none";
+			reg = <0x50250200 0x138>;
+			status = "disabled";
+		};
+
+		i2s1: i2s at 50260000 {
+			compatible = "snps.designware-i2s";
+			reg = <0x50260000 0x200>;
+			interrupts = <6>;
+			clocks = <&sysclk K210_CLK_I2S1>;
+			resets = <&sysrst K210_RST_I2S1>;
+			status = "disabled";
+		};
+
+		i2s2: i2s at 50270000 {
+			compatible = "snps.designware-i2s";
+			reg = <0x50270000 0x200>;
+			interrupts = <7>;
+			clocks = <&sysclk K210_CLK_I2S2>;
+			resets = <&sysrst K210_RST_I2S2>;
+			status = "disabled";
+		};
+
+		i2c0: i2c at 50280000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x50280000 0x100>;
+			interrupts = <8>;
+			clocks = <&sysclk K210_CLK_I2C0>;
+			resets = <&sysrst K210_RST_I2C0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c at 50290000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x50290000 0x100>;
+			interrupts = <9>;
+			clocks = <&sysclk K210_CLK_I2C1>;
+			resets = <&sysrst K210_RST_I2C1>;
+			status = "disabled";
+		};
+
+
+		i2c2: i2c at 502A0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x502A0000 0x100>;
+			interrupts = <10>;
+			clocks = <&sysclk K210_CLK_I2C2>;
+			resets = <&sysrst K210_RST_I2C2>;
+			status = "disabled";
+		};
+
+		fpioa: pinmux at 502B0000 {
+			compatible = "pinconf-single";
+			reg = <0x502B0000 0x100>;
+			//#pinctrl-cells = <???>;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0x7fffff>;
+			clocks = <&sysclk K210_CLK_FPIOA>;
+			resets = <&sysrst K210_RST_FPIOA>;
+			status = "disabled";
+		};
+
+		sha256: sha256 at 502C0000 {
+			compatible = "none";
+			reg = <0x502C0000 0x38>;
+			clocks = <&sysclk K210_CLK_SHA>;
+			resets = <&sysrst K210_RST_SHA>;
+			status = "disabled";
+		};
+
+		timer0: timer at 502D0000 {
+			compatible = "none";
+			reg = <0x502D0000 0xC0>;
+			interrupts = <14 15>;
+			clocks = <&sysclk K210_CLK_TIMER0>;
+			resets = <&sysrst K210_RST_TIMER0>;
+			status = "disabled";
+		};
+
+		timer1: timer at 502E0000 {
+			compatible = "none";
+			reg = <0x502E0000 0xC0>;
+			interrupts = <16 17>;
+			clocks = <&sysclk K210_CLK_TIMER1>;
+			resets = <&sysrst K210_RST_TIMER1>;
+			status = "disabled";
+		};
+
+		timer2: timer at 502F0000 {
+			compatible = "none";
+			reg = <0x502F0000 0xC0>;
+			interrupts = <18 19>;
+			clocks = <&sysclk K210_CLK_TIMER2>;
+			resets = <&sysrst K210_RST_TIMER2>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog at 50400000 {
+			compatible = "none";
+			reg = <0x50400000 0x100>;
+			interrupts = <21>;
+			clocks = <&sysclk K210_CLK_WDT0>;
+			resets = <&sysrst K210_RST_WDT0>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog at 50410000 {
+			compatible = "none";
+			reg = <0x50410000 0x100>;
+			interrupts = <22>;
+			clocks = <&sysclk K210_CLK_WDT1>;
+			resets = <&sysrst K210_RST_WDT1>;
+			status = "disabled";
+		};
+
+		dvp0: camera at 50430000 {
+			compatible = "none";
+			reg = <0x50430000 0x2c>;
+			interrupts = <24>;
+			clocks = <&sysclk K210_CLK_DVP>;
+			resets = <&sysrst K210_RST_DVP>;
+			status = "disabled";
+		};
+
+		sysctl: sysctl at 50440000 {
+			compatible = "kendryte,k210-sysctl", "syscon";
+			reg = <0x50440000 0x80>;
+
+			sysclk: clock-controller {
+				compatible = "kendryte,k210-clk";
+				clocks = <&in0>;
+				#clock-cells = <1>;
+			};
+
+			sysrst: reset-controller {
+				compatible = "kendryte,k210-rst";
+				#reset-cells = <1>;
+			};
+		};
+
+		aes0: aes at 50450000 {
+			compatible = "none";
+			reg = <0x50450000 0x94>;
+			clocks = <&sysclk K210_CLK_AES>;
+			resets = <&sysrst K210_RST_AES>;
+			status = "disabled";
+		};
+
+		rtc: rts at 50460000 {
+			compatible = "none";
+			reg = <0x50460000 0x2C>;
+			clocks = <&in0>;
+			resets = <&sysrst K210_RST_RTC>;
+			interrupts = <20>;
+			status = "disabled";
+		};
+
+		spi0: spi at 52000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x52000000 0x120>;
+			interrupts = <1>;
+			clocks = <&sysclk K210_CLK_SPI0>;
+			clock-names = "ssi_clk";
+			resets = <&sysrst K210_RST_SPI0>;
+			num-cs = <4>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		spi1: spi at 53000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x53000000 0x120>;
+			interrupts = <2>;
+			clocks = <&sysclk K210_CLK_SPI1>;
+			clock-names = "ssi_clk";
+			resets = <&sysrst K210_RST_SPI1>;
+			num-cs = <4>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		spi3: spi at 54000000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "snps,dw-apb-ssi";
+			reg = <0x54000000 0x120>;
+			interrupts = <4>;
+			clocks = <&sysclk K210_CLK_SPI3>;
+			clock-names = "ssi_clk";
+			assigned-clocks = <&sysclk K210_CLK_SPI3>;
+			assigned-clock-parents = <&sysclk K210_CLK_PLL0>;
+			resets = <&sysrst K210_RST_SPI3>;
+			num-cs = <4>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		rom0: nvmem at 88000000 {
+			reg = <0x88000000 0x4000>;
+			read-only;
+			clocks = <&sysclk K210_CLK_ROM>;
+			resets = <&sysrst K210_RST_ROM>;
+		};
+	};
+};
diff --git a/board/sipeed/maix/Kconfig b/board/sipeed/maix/Kconfig
index 9259eb34aa..efeaddf317 100644
--- a/board/sipeed/maix/Kconfig
+++ b/board/sipeed/maix/Kconfig
@@ -18,6 +18,9 @@ config SYS_CONFIG_NAME
 config SYS_TEXT_BASE
 	default 0x80000000
 
+config DEFAULT_DEVICE_TREE
+	default "k210-maix-bit"
+
 config NR_CPUS
 	default 2
 
diff --git a/configs/sipeed_maix_bitm_defconfig b/configs/sipeed_maix_bitm_defconfig
index f062cc8c58..ecd69c0873 100644
--- a/configs/sipeed_maix_bitm_defconfig
+++ b/configs/sipeed_maix_bitm_defconfig
@@ -15,6 +15,7 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_BOOTSTAGE_STASH_ADDR=0
 CONFIG_64BIT=y
 CONFIG_TARGET_SIPEED_MAIX=y
+CONFIG_DEFAULT_DEVICE_TREE="k210-maix-bit"
 CONFIG_NR_CPUS=2
 CONFIG_GENERIC_RISCV=y
 CONFIG_ARCH_DEFAULT_RV64I=y
diff --git a/include/dt-bindings/clock/k210-sysctl.h b/include/dt-bindings/clock/k210-sysctl.h
new file mode 100644
index 0000000000..308974baf8
--- /dev/null
+++ b/include/dt-bindings/clock/k210-sysctl.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#ifndef CLOCK_K210_SYSCTL_H
+#define CLOCK_K210_SYSCTL_H
+
+/* Clocks as defined by kendryte-standalone-sdk/lib/drivers/include/sysctl.h */
+#define K210_CLK_PLL0 0
+#define K210_CLK_PLL1 1
+#define K210_CLK_PLL2 2
+#define K210_CLK_CPU 3
+#define K210_CLK_SRAM0 4
+#define K210_CLK_SRAM1 5
+#define K210_CLK_APB0 6
+#define K210_CLK_APB1 7
+#define K210_CLK_APB2 8
+#define K210_CLK_ROM 9
+#define K210_CLK_DMA 10
+#define K210_CLK_AI 11
+#define K210_CLK_DVP 12
+#define K210_CLK_FFT 13
+#define K210_CLK_GPIO 14
+#define K210_CLK_SPI0 15
+#define K210_CLK_SPI1 16
+#define K210_CLK_SPI2 17
+#define K210_CLK_SPI3 18
+#define K210_CLK_I2S0 19
+#define K210_CLK_I2S1 20
+#define K210_CLK_I2S2 21
+#define K210_CLK_I2C0 22
+#define K210_CLK_I2C1 23
+#define K210_CLK_I2C2 24
+#define K210_CLK_UART1 25
+#define K210_CLK_UART2 26
+#define K210_CLK_UART3 27
+#define K210_CLK_AES 28
+#define K210_CLK_FPIOA 29
+#define K210_CLK_TIMER0 30
+#define K210_CLK_TIMER1 31
+#define K210_CLK_TIMER2 32
+#define K210_CLK_WDT0 33
+#define K210_CLK_WDT1 34
+#define K210_CLK_SHA 35
+#define K210_CLK_OTP 36
+#define K210_CLK_RTC 37
+#define K210_CLK_ACLK 40
+#define K210_CLK_MAX 40
+
+#define K210_CLK_HCLK 41 /* Unused */
+#define K210_CLK_IN0 42 /* Defined elsewhere in the device tree */
+
+#endif /* CLOCK_K210_SYSCTL_H */
diff --git a/include/dt-bindings/reset/k210-sysctl.h b/include/dt-bindings/reset/k210-sysctl.h
new file mode 100644
index 0000000000..670e74daaf
--- /dev/null
+++ b/include/dt-bindings/reset/k210-sysctl.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2 at gmail.com>
+ */
+
+#ifndef RESET_K210_SYSCTL_H
+#define RESET_K210_SYSCTL_H
+
+#define K210_RST_ROM 0	
+#define K210_RST_DMA 1	
+#define K210_RST_AI 2	
+#define K210_RST_DVP 3	
+#define K210_RST_FFT 4	
+#define K210_RST_GPIO 5	
+#define K210_RST_SPI0 6	
+#define K210_RST_SPI1 7	
+#define K210_RST_SPI2 8	
+#define K210_RST_SPI3 9	
+#define K210_RST_I2S0 10	
+#define K210_RST_I2S1 11	
+#define K210_RST_I2S2 12	
+#define K210_RST_I2C0 13	
+#define K210_RST_I2C1 14	
+#define K210_RST_I2C2 15	
+#define K210_RST_UART1 16	
+#define K210_RST_UART2 17	
+#define K210_RST_UART3 18	
+#define K210_RST_AES 19	
+#define K210_RST_FPIOA 20	
+#define K210_RST_TIMER0 21	
+#define K210_RST_TIMER1 22	
+#define K210_RST_TIMER2 23	
+#define K210_RST_WDT0 24	
+#define K210_RST_WDT1 25	
+#define K210_RST_SHA 26	
+#define K210_RST_RTC 29	
+
+#endif /* RESET_K210_SYSCTL_H */
